 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| dsPIC33FJXXXGPX06A/X08A/X10A Data Sheet High-Performance, 16-bit Digital Signal Controllers 2009 Microchip Technology Inc. Preliminary DS70593B Note the following details of the code protection feature on Microchip devices: * * Microchip products meet the specification contained in their particular Microchip Data Sheet. Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. Microchip is willing to work with the customer who is concerned about the integrity of their code. Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." * * * Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2009, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC(R) MCUs and dsPIC(R) DSCs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS70593B-page 2 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A High-Performance, 16-Bit Digital Signal Controllers Operating Range: * Up to 40 MIPS operation (@ 3.0-3.6V): - Industrial temperature range (-40C to +85C) - Extended temperature range (-40C to +125C) * Up to 20 MIPS operation (@ 3.0-3.6V): - High temperature range (-40C to +140C) Digital I/O: * * * * * Up to 85 programmable digital I/O pins Wake-up/Interrupt-on-Change on up to 24 pins Output pins can drive from 3.0V to 3.6V All digital input pins are 5V tolerant 4 mA sink on all I/O pins High-Performance DSC CPU: * * * * * * * * * * * * * * Modified Harvard architecture C compiler optimized instruction set 16-bit wide dat path 24-bit wide instructions Linear program memory addressing up to 4M instruction words Linear data memory addressing up to 64 Kbytes 83 base instructions: mostly 1 word/1 cycle Sixteen 16-bit General Purpose Registers Two 40-bit accumulators: - With rounding and saturation options Flexible and powerful addressing modes: - Indirect, Modulo and Bit-Reversed Software stack 16 x 16 fractional/integer multiply operations 32/16 and 16/16 divide operations Single-cycle multiply and accumulate: - Accumulator write back for DSP operations - Dual data fetch Up to 16-bit shifts for up to 40-bit data On-Chip Flash and SRAM: * Flash program memory, up to 256 Kbytes * Data SRAM, up to 30 Kbytes (includes 2 Kbytes of DMA RAM): System Management: * Flexible clock options: - External, crystal, resonator, internal RC - Fully integrated PLL - Extremely low jitter PLL * Power-up Timer * Oscillator Start-up Timer/Stabilizer * Watchdog Timer with its own RC oscillator * Fail-Safe Clock Monitor * Reset by multiple sources Power Management: * On-chip 2.5V voltage regulator * Switch between clock sources in real time * Idle, Sleep and Doze modes with fast wake-up * Direct Memory Access (DMA): * 8-channel hardware DMA: * 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA: - Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing) * Most peripherals support DMA Timers/Capture/Compare/PWM: * Timer/Counters, up to nine 16-bit timers: - Can pair up to make four 32-bit timers - 1 timer runs as Real-Time Clock with external 32.768 kHz oscillator - Programmable prescaler * Input Capture (up to eight channels): - Capture on up, down or both edges - 16-bit capture input functions - 4-deep FIFO on each capture * Output Compare (up to eight channels): - Single or Dual 16-Bit Compare mode - 16-bit Glitchless PWM mode Interrupt Controller: * * * * * 5-cycle latency Up to 63 available interrupt sources Up to five external interrupts Seven programmable priority levels Five processor exceptions 2009 Microchip Technology Inc. Preliminary DS70593B-page 3 dsPIC33FJXXXGPX06A/X08A/X10A Communication Modules: * 3-wire SPI (up to two modules): - Framing supports I/O interface to simple codecs - Supports 8-bit and 16-bit data - Supports all serial clock formats and sampling modes * I2CTM (up to two modules): - Full Multi-Master Slave mode support - 7-bit and 10-bit addressing - Bus collision detection and arbitration - Integrated signal conditioning - Slave address masking * UART (up to two modules): - Interrupt on address bit detect - Interrupt on UART error - Wake-up on Start bit from Sleep mode - 4-character TX and RX FIFO buffers - LIN bus support - IrDA(R) encoding and decoding in hardware - High-Speed Baud mode - Hardware Flow Control with CTS and RTS * Data Converter Interface (DCI) module: - Codec interface - Supports I2S and AC'97 protocols - Up to 16-bit data words, up to 16 words per frame - 4-word deep TX and RX buffers * Enhanced CAN (ECANTM module) 2.0B active (up to two modules): - Up to eight transmit and up to 32 receive buffers - 16 receive filters and three masks - Loopback, Listen Only and Listen All Messages modes for diagnostics and bus monitoring - Wake-up on CAN message - Automatic processing of Remote Transmission Requests - FIFO mode using DMA - DeviceNetTM addressing support Analog-to-Digital Converters (ADCs): * Up to two ADC modules in a device * 10-bit, 1.1 Msps or 12-bit, 500 ksps conversion: - Two, four or eight simultaneous samples - Up to 32 input channels with auto-scanning - Conversion start can be manual or synchronized with one of four trigger sources - Conversion possible in Sleep mode - 1 LSb max integral nonlinearity - 1 LSb max differential nonlinearity CMOS Flash Technology: * * * * * Low-power, high-speed Flash technology Fully static design 3.3V (10%) operating voltage Industrial and extended temperature Low-power consumption Packaging: * * * * 100-pin TQFP (14x14x1 mm and 12x12x1 mm) 80-pin TQFP (12x12x1 mm) 64-pin TQFP (10x10x1 mm) 64-pin QFN (9x9x0.9 mm) Note: See the device variant tables for exact peripheral features per device. DS70593B-page 4 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A dsPIC33F PRODUCT FAMILIES The dsPIC33F General Purpose Family of devices are ideal for a wide variety of 16-bit MCU embedded applications. The controllers with codec interfaces are well-suited for speech and audio processing applications. The device names, pin counts, memory sizes and peripheral availability of each family are listed below, followed by their pinout diagrams. dsPIC33F General Purpose Family Controllers Output Compare Std. PWM I/O Pins (Max)(2) Input Capture 16-bit Timer Program Flash Memory (Kbyte) 64 64 64 64 64 64 128 128 128 128 128 128 256 256 256 Enhanced CANTM Packages PT, MR PT, MR PF, PT PT, MR PT PF, PT PT, MR PT, MR PF, PT PT, MR PT PF, PT PT, MR PF, PT PF, PT Codec Interface UART I CTM 1 2 2 2 2 2 1 2 2 2 2 2 2 2 2 ADC dsPIC33FJ64GP206A dsPIC33FJ64GP306A dsPIC33FJ64GP310A dsPIC33FJ64GP706A dsPIC33FJ64GP708A dsPIC33FJ64GP710A dsPIC33FJ128GP206A dsPIC33FJ128GP306A dsPIC33FJ128GP310A dsPIC33FJ128GP706A dsPIC33FJ128GP708A dsPIC33FJ128GP710A dsPIC33FJ256GP506A dsPIC33FJ256GP510A dsPIC33FJ256GP710A Note 1: 2: 64 64 100 64 80 100 64 64 100 64 80 100 64 100 100 8 16 16 16 16 16 8 16 16 16 16 16 16 16 30 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ADC, 18 ch 1 ADC, 18 ch 1 ADC, 32 ch 2 ADC, 18 ch 2 ADC, 24 ch 2 ADC, 32 ch 1 ADC, 18 ch 1 ADC, 18 ch 1 ADC, 32 ch 2 ADC, 18 ch 2 ADC, 24 ch 2 ADC, 32 ch 1 ADC, 18 ch 1 ADC, 32 ch 2 ADC, 32 ch 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Device Pins RAM (Kbyte)(1) SPI 0 0 0 2 2 2 0 0 0 2 2 2 1 1 2 53 53 85 53 69 85 53 53 85 53 69 85 53 85 85 RAM size is inclusive of 2 Kbytes DMA RAM. Maximum I/O pin count includes pins shared by the peripheral functions. 2009 Microchip Technology Inc. Preliminary DS70593B-page 5 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams 64-Pin QFN(1) CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 RF1 RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP206A dsPIC33FJ128GP206A 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/CN17/RF4 U2TX/CN18/RF5 Note 1: The metal plane at the bottom of the device is not connected to any pins and should be connected to VSS externally. DS70593B-page 6 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin QFN(1) CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 RF1 RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP306A dsPIC33FJ128GP306A 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 Note 1: The metal plane at the bottom of the device is not connected to any pins and should be connected to VSS externally. 2009 Microchip Technology Inc. Preliminary DS70593B-page 7 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin QFN(1) CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP506A 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 Note 1: The metal plane at the bottom of the device is not connected to any pins and should be connected to VSS externally. DS70593B-page 8 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin QFN(1) = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CSDO/RG13 CSDI/RG12 CSCK/RG14 C2RX/RG0 C2TX/RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 dsPIC33FJ64GP706A dsPIC33FJ128GP706A 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 Note 1: The metal plane at the bottom of the device is not connected to any pins and should be connected to VSS externally. 2009 Microchip Technology Inc. Preliminary DS70593B-page 9 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin TQFP CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 RF1 RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP206A dsPIC33FJ128GP206A PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/CN17/RF4 U2TX/CN18/RF5 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 DS70593B-page 10 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin TQFP CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 RF1 RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP306A dsPIC33FJ128GP306A PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 2009 Microchip Technology Inc. PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Preliminary DS70593B-page 11 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin TQFP CSDO/RG13 CSDI/RG12 CSCK/RG14 RG0 RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ256GP506A PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 DS70593B-page 12 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 64-Pin TQFP CSDO/RG13 CSDI/RG12 CSCK/RG14 C2RX/RG0 C2TX/RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/IC6/CN14/RD5 OC5/IC5/CN13/RD4 OC4/RD3 OC3/RD2 OC2/RD1 = Pins are up to 5V tolerant 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD AN5/IC8/CN7/RB5 AN4/IC7/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/VREF-/CN3/RB1 PGED3/AN0/VREF+/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 dsPIC33FJ64GP706A dsPIC33FJ128GP706A PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/T4CK/CN1/RC13 OC1/RD0 IC4/INT4/RD11 IC3/INT3/RD10 IC2/U1CTS/INT2/RD9 IC1/INT1/RD8 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 U1RTS/SCK1/INT0/RF6 U1RX/SDI1/RF2 U1TX/SDO1/RF3 2009 Microchip Technology Inc. PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 AVDD AVSS U2CTS/AN8/RB8 AN9/RB9 TMS/AN10/RB10 TDO/AN11/RB11 VSS VDD TCK/AN12/RB12 TDI/AN13/RB13 U2RTS/AN14/RB14 AN15/OCFB/CN12/RB15 U2RX/SDA2/CN17/RF4 U2TX/SCL2/CN18/RF5 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Preliminary DS70593B-page 13 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 80-Pin TQFP = Pins are up to 5V tolerant AN23/CN23/RA7 AN22/CN22/RA6 C2RX/RG0 C2TX/RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC6/CN14/RD5 OC5/CN13/RD4 IC6/CN19/RD13 OC7/CN15/RD6 CSDO/RG13 CSDI/RG12 CSCK/RG14 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 IC5/RD12 OC4/RD3 OC3/RD2 OC2/RD1 COFS/RG15 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 AN18/T4CK/T9CK/RC3 AN19/T5CK/T8CK/RC4 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD TMS/AN20/INT1/RA12 TDO/AN21/INT2/RA13 AN5/CN7/RB5 AN4/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/CN3/RB1 PGED3/AN0/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 60 59 58 57 56 55 54 53 52 PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/CN1/RC13 OC1/RD0 IC4/RD11 IC3/RD10 IC2/RD9 IC1/RD8 SDA2/INT4/RA3 SCL2/INT3/RA2 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD SCL1/RG2 SDA1/RG3 SCK1/INT0/RF6 SDI1/RF7 SDO1/RF8 U1RX/RF2 U1TX/RF3 dsPIC33FJ64GP708A dsPIC33FJ128GP708A 51 50 49 48 47 46 45 44 43 42 41 40 U2TX/CN18/RF5 VREF-/RA9 U2CTS/AN8/RB8 VREF+/RA10 U2RTS/AN14/RB14 TCK/AN12/RB12 TDI/AN13/RB13 AN9/RB9 IC7/U1CTS/CN20/RD14 DS70593B-page 14 Preliminary AN15/OCFB/CN12/RB15 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 IC8/U1RTS/CN21/RD15 U2RX/CN17/RF4 AN10/RB10 AN11/RB11 AVDD AVSS VDD VSS 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 100-Pin TQFP = Pins are up to 5V tolerant 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 AN28/RE4 AN27/RE3 AN26/RE2 CSDO/RG13 CSDI/RG12 CSCK/RG14 AN25/RE1 AN24/RE0 AN23/CN23/RA7 AN22/CN22/RA6 RG0 RG1 RF1 RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/CN14/RD5 OC5/CN13/RD4 IC6/CN19/RD13 IC5/RD12 OC4/RD3 OC3/RD2 OC2/RD1 COFS/RG15 VDD AN29/RE5 AN30/RE6 AN31/RE7 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 AN18/T4CK/T9CK/RC3 AN19/T5CK/T8CK/RC4 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD TMS/RA0 AN20/INT1/RA12 AN21/INT2/RA13 AN5/CN7/RB5 AN4/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/CN3/RB1 PGED3/AN0/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 75 74 73 72 71 70 69 68 67 66 65 64 VSS PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/CN1/RC13 OC1/RD0 IC4/RD11 IC3/RD10 IC2/RD9 IC1/RD8 INT4/RA15 INT3/RA14 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD TDO/RA5 TDI/RA4 SDA2/RA3 SCL2/RA2 SCL1/RG2 SDA1/RG3 SCK1/INT0/RF6 SDI1/RF7 SDO1/RF8 U1RX/RF2 U1TX/RF3 dsPIC33FJ64GP310A dsPIC33FJ128GP310A 63 62 61 60 59 58 57 56 55 54 53 52 51 2009 Microchip Technology Inc. PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 VREF-/RA9 VREF+/RA10 AVDD AVSS AN8/RB8 AN9/RB9 AN10/RB10 AN11/RB11 VSS VDD TCK/RA1 U2RTS/RF13 U2CTS/RF12 AN12/RB12 AN13/RB13 AN14/RB14 AN15/OCFB/CN12/RB15 VSS VDD IC7/U1CTS/CN20/RD14 IC8/U1RTS/CN21/RD15 U2RX/CN17/RF4 U2TX/CN18/RF5 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Preliminary DS70593B-page 15 dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 100-Pin TQFP = Pins are up to 5V tolerant 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 AN28/RE4 AN27/RE3 AN26/RE2 CSDO/RG13 CSDI/RG12 CSCK/RG14 AN25/RE1 AN24/RE0 AN23/CN23/RA7 AN22/CN22/RA6 RG0 RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/CN14/RD5 OC5/CN13/RD4 IC6/CN19/RD13 IC5/RD12 OC4/RD3 OC3/RD2 OC2/RD1 COFS/RG15 VDD AN29/RE5 AN30/RE6 AN31/RE7 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 AN18/T4CK/T9CK/RC3 AN19/T5CK/T8CK/RC4 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD TMS/RA0 AN20/INT1/RA12 AN21/INT2/RA13 AN5/CN7/RB5 AN4/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/CN3/RB1 PGED3/AN0/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 VSS PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/CN1/RC13 OC1/RD0 IC4/RD11 IC3/RD10 IC2/RD9 IC1/RD8 INT4/RA15 INT3/RA14 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD TDO/RA5 TDI/RA4 SDA2/RA3 SCL2/RA2 SCL1/RG2 SDA1/RG3 SCK1/INT0/RF6 SDI1/RF7 SDO1/RF8 U1RX/RF2 U1TX/RF3 dsPIC33FJ256GP510A 63 62 61 60 59 58 57 56 55 54 53 52 51 PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 VREF-/RA9 VREF+/RA10 AVDD AVSS AN8/RB8 AN9/RB9 AN10/RB10 AN11/RB11 VSS VDD TCK/RA1 U2RTS/RF13 U2CTS/RF12 AN12/RB12 AN13/RB13 AN14/RB14 AN15/OCFB/CN12/RB15 VSS VDD IC7/U1CTS/CN20/RD14 IC8/U1RTS/CN21/RD15 U2RX/CN17/RF4 U2TX/CN18/RF5 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 DS70593B-page 16 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A Pin Diagrams (Continued) 100-Pin TQFP = Pins are up to 5V tolerant 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 AN28/RE4 AN27/RE3 AN26/RE2 CSDO/RG13 CSDI/RG12 CSCK/RG14 AN25/RE1 AN24/RE0 AN23/CN23/RA7 AN22/CN22/RA6 C2RX/RG0 C2TX/RG1 C1TX/RF1 C1RX/RF0 VDD VCAP/VDDCORE OC8/CN16/RD7 OC7/CN15/RD6 OC6/CN14/RD5 OC5/CN13/RD4 IC6/CN19/RD13 IC5/RD12 OC4/RD3 OC3/RD2 OC2/RD1 COFS/RG15 VDD AN29/RE5 AN30/RE6 AN31/RE7 AN16/T2CK/T7CK/RC1 AN17/T3CK/T6CK/RC2 AN18/T4CK/T9CK/RC3 AN19/T5CK/T8CK/RC4 SCK2/CN8/RG6 SDI2/CN9/RG7 SDO2/CN10/RG8 MCLR SS2/CN11/RG9 VSS VDD TMS/RA0 AN20/INT1/RA12 AN21/INT2/RA13 AN5/CN7/RB5 AN4/CN6/RB4 AN3/CN5/RB3 AN2/SS1/CN4/RB2 PGEC3/AN1/CN3/RB1 PGED3/AN0/CN2/RB0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 75 74 73 72 71 70 69 68 67 66 VSS PGEC2/SOSCO/T1CK/CN0/RC14 PGED2/SOSCI/CN1/RC13 OC1/RD0 IC4/RD11 IC3/RD10 IC2/RD9 IC1/RD8 INT4/RA15 INT3/RA14 VSS OSC2/CLKO/RC15 OSC1/CLKIN/RC12 VDD TDO/RA5 TDI/RA4 SDA2/RA3 SCL2/RA2 SCL1/RG2 SDA1/RG3 SCK1/INT0/RF6 SDI1/RF7 SDO1/RF8 U1RX/RF2 U1TX/RF3 dsPIC33FJ64GP710A dsPIC33FJ128GP710A dsPIC33FJ256GP710A 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 2009 Microchip Technology Inc. PGEC1/AN6/OCFA/RB6 PGED1/AN7/RB7 VREF-/RA9 VREF+/RA10 AVDD AVSS AN8/RB8 AN9/RB9 AN10/RB10 AN11/RB11 VSS VDD TCK/RA1 U2RTS/RF13 U2CTS/RF12 AN12/RB12 AN13/RB13 AN14/RB14 AN15/OCFB/CN12/RB15 VSS VDD IC7/U1CTS/CN20/RD14 IC8/U1RTS/CN21/RD15 U2RX/CN17/RF4 U2TX/CN18/RF5 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Preliminary DS70593B-page 17 dsPIC33FJXXXGPX06A/X08A/X10A Table of Contents dsPIC33F Product Families ................................................................................................................................................................... 5 1.0 Device Overview ........................................................................................................................................................................ 21 2.0 Guidelines for Getting Started with 16-Bit Digital Signal Controllers .......................................................................................... 25 3.0 CPU ............................................................................................................................................................................................ 29 4.0 Memory Organization ................................................................................................................................................................. 41 5.0 Flash Program Memory .............................................................................................................................................................. 79 6.0 Reset ......................................................................................................................................................................................... 85 7.0 Interrupt Controller ..................................................................................................................................................................... 91 8.0 Direct Memory Access (DMA) .................................................................................................................................................. 137 9.0 Oscillator Configuration ............................................................................................................................................................ 147 10.0 Power-Saving Features ............................................................................................................................................................ 157 11.0 I/O Ports ................................................................................................................................................................................... 165 12.0 Timer1 ...................................................................................................................................................................................... 167 13.0 Timer2/3, Timer4/5, Timer6/7 and Timer8/9 ............................................................................................................................ 169 14.0 Input Capture............................................................................................................................................................................ 175 15.0 Output Compare ....................................................................................................................................................................... 177 16.0 Serial Peripheral Interface (SPI)............................................................................................................................................... 181 17.0 Inter-Integrated CircuitTM (I2CTM) .............................................................................................................................................. 187 18.0 Universal Asynchronous Receiver Transmitter (UART) ........................................................................................................... 195 19.0 Enhanced CAN (ECANTM) Module ........................................................................................................................................... 201 20.0 Data Converter Interface (DCI) Module.................................................................................................................................... 227 21.0 10-Bit/12-Bit Analog-to-Digital Converter (ADC) ...................................................................................................................... 235 22.0 Special Features ...................................................................................................................................................................... 247 23.0 Instruction Set Summary .......................................................................................................................................................... 255 24.0 Development Support............................................................................................................................................................... 263 25.0 Electrical Characteristics .......................................................................................................................................................... 267 26.0 High Temperature Electrical Characteristics ............................................................................................................................ 307 27.0 Packaging Information.............................................................................................................................................................. 317 Appendix A: Migrating from dsPIC33FJXXXGPX06/X08/X10 Devices to dsPIC33FJXXXGPX06A/X08A/X10A Devices ................ 329 Appendix B: Revision History............................................................................................................................................................. 330 Index ................................................................................................................................................................................................. 331 The Microchip Web Site ..................................................................................................................................................................... 335 Customer Change Notification Service .............................................................................................................................................. 335 Customer Support .............................................................................................................................................................................. 335 Reader Response .............................................................................................................................................................................. 336 Product Identification System............................................................................................................................................................. 337 DS70593B-page 18 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000). Errata An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: * Microchip's Worldwide Web site; http://www.microchip.com * Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are using. Customer Notification System Register on our web site at www.microchip.com to receive the most current information on all of our products. 2009 Microchip Technology Inc. Preliminary DS70593B-page 19 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 20 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 1.0 Note: DEVICE OVERVIEW This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to the latest family reference sections of the "dsPIC33F/ PIC24H Family Reference Manual", which are available from the Microchip website (www.microchip.com). This feature makes the family suitable for a wide variety of high-performance digital signal control applications. The device is pin compatible with the PIC24H family of devices, and also share a very high degree of compatibility with the dsPIC30F family devices. This allows for easy migration between device families as may be necessitated by the specific functionality, computational resource and system cost requirements of the application. The dsPIC33FJXXXGPX06A/X08A/X10A device family employs a powerful 16-bit architecture that seamlessly integrates the control features of a Microcontroller (MCU) with the computational capabilities of a Digital Signal Processor (DSP). The resulting functionality is ideal for applications that rely on high-speed, repetitive computations, as well as control. The DSP engine, dual 40-bit accumulators, hardware support for division operations, barrel shifter, 17 x 17 multiplier, a large array of 16-bit working registers and a wide variety of data addressing modes, together provide the dsPIC33FJXXXGPX06A/X08A/X10A Central Processing Unit (CPU) with extensive mathematical processing capability. Flexible and deterministic interrupt handling, coupled with a powerful array of peripherals, renders the dsPIC33FJXXXGPX06A/X08A/X10A devices suitable for control applications. Further, Direct Memory Access (DMA) enables overhead-free transfer of data between several peripherals and a dedicated DMA RAM. Reliable, field programmable Flash program memory ensures scalability of applications that use dsPIC33FJXXXGPX06A/X08A/X10A devices. Figure 1-1 illustrates a general block diagram of the various core and peripheral modules in the dsPIC33FJXXXGPX06A/X08A/X10A family of devices. Table 1-1 provides the functions of the various pins illustrated in the pinout diagrams. This document contains device specific information for the following devices: * * * * * * * * * * * * * * * dsPIC33FJ64GP206A dsPIC33FJ64GP306A dsPIC33FJ64GP310A dsPIC33FJ64GP706A dsPIC33FJ64GP708A dsPIC33FJ64GP710A dsPIC33FJ128GP206A dsPIC33FJ128GP306A dsPIC33FJ128GP310A dsPIC33FJ128GP706A dsPIC33FJ128GP708A dsPIC33FJ128GP710A dsPIC33FJ256GP506A dsPIC33FJ256GP510A dsPIC33FJ256GP710A The dsPIC33FJXXXGPX06A/X08A/X10A General Purpose Family of device includes devices with a wide range of pin counts (64, 80 and 100), different program memory sizes (64 Kbytes, 128 Kbytes and 256 Kbytes) and different RAM sizes (8 Kbytes, 16 Kbytes and 30 Kbytes). 2009 Microchip Technology Inc. Preliminary DS70593B-page 21 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 1-1: PSV and Table Data Access Control Block Interrupt Controller 8 16 dsPIC33FJXXXGPX06A/X08A/X10A GENERAL BLOCK DIAGRAM Y Data Bus X Data Bus PORTA 16 16 16 Data Latch Data Latch Y RAM Address Latch DMA 16 16 Controller PORTC 16 DMA RAM PORTB 23 23 PCU PCH PCL Program Counter Loop Stack Control Control Logic Logic X RAM Address Latch 23 Address Latch Address Generator Units Program Memory EA MUX Data Latch 24 ROM Latch 16 Literal Data PORTD 16 Instruction Decode and Control Control Signals to Various Blocks Instruction Reg 16 PORTE DSP Engine OSC2/CLKO OSC1/CLKI Timing Generation FRC/LPRC Oscillators Precision Band Gap Reference Voltage Regulator Power-up Timer Oscillator Start-up Timer Power-on Reset Watchdog Timer Brown-out Reset PORTG PORTF Divide Support 16 x 16 W Register Array 16 16-bit ALU 16 VCAP/VDDCORE VDD, VSS MCLR Timers 1-9 OC/ PWM1-8 DCI ADC1,2 ECAN1,2 IC1-8 CN1-23 SPI1,2 I2C1,2 UART1,2 Note: Not all pins or features are implemented on all device pinout configurations. See pinout diagrams for the specific pins and features present on each device. DS70593B-page 22 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 1-1: Pin Name AN0-AN31 AVDD AVSS CLKI CLKO PINOUT I/O DESCRIPTIONS Pin Type I P P I O Buffer Type Analog P P Analog input channels. Positive supply for analog modules. This pin must be connected at all times. Ground reference for analog modules. Description ST/CMOS External clock source input. Always associated with OSC1 pin function. -- Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator mode. Optionally functions as CLKO in RC and EC modes. Always associated with OSC2 pin function. ST ST ST ST -- ST -- ST -- ST ST ST ST ST ST ST ST ST ST ST ST ST ST ST -- Input change notification inputs. Can be software programmed for internal weak pull-ups on all inputs. Data Converter Interface frame synchronization pin. Data Converter Interface serial clock input/output pin. Data Converter Interface serial data input pin. Data Converter Interface serial data output pin. ECAN1 bus receive pin. ECAN1 bus transmit pin. ECAN2 bus receive pin. ECAN2 bus transmit pin. Data I/O pin for programming/debugging communication channel 1. Clock input pin for programming/debugging communication channel 1. Data I/O pin for programming/debugging communication channel 2. Clock input pin for programming/debugging communication channel 2. Data I/O pin for programming/debugging communication channel 3. Clock input pin for programming/debugging communication channel 3. Capture inputs 1 through 8. External interrupt 0. External interrupt 1. External interrupt 2. External interrupt 3. External interrupt 4. Master Clear (Reset) input. This pin is an active-low Reset to the device. Compare Fault A input (for Compare Channels 1, 2, 3 and 4). Compare Fault B input (for Compare Channels 5, 6, 7 and 8). Compare outputs 1 through 8. CN0-CN23 COFS CSCK CSDI CSDO C1RX C1TX C2RX C2TX PGED1 PGEC1 PGED2 PGEC2 PGED3 PGEC3 IC1-IC8 INT0 INT1 INT2 INT3 INT4 MCLR OCFA OCFB OC1-OC8 OSC1 OSC2 RA0-RA7 RA9-RA10 RA12-RA15 RB0-RB15 RC1-RC4 RC12-RC15 RD0-RD15 RE0-RE7 RF0-RF8 RF12-RF13 I I/O I/O I O I O I O I/O I I/O I I/O I I I I I I I I/P I I O I I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O ST/CMOS Oscillator crystal input. ST buffer when configured in RC mode; CMOS otherwise. -- Oscillator crystal output. Connects to crystal or resonator in Crystal Oscillator mode. Optionally functions as CLKO in RC and EC modes. ST ST ST ST ST ST ST ST ST ST PORTA is a bidirectional I/O port. PORTB is a bidirectional I/O port. PORTC is a bidirectional I/O port. PORTD is a bidirectional I/O port. PORTE is a bidirectional I/O port. PORTF is a bidirectional I/O port. Analog = Analog input; O = Output; P = Power I = Input Legend: CMOS = CMOS compatible input or output; ST = Schmitt Trigger input with CMOS levels; 2009 Microchip Technology Inc. Preliminary DS70593B-page 23 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 1-1: Pin Name RG0-RG3 RG6-RG9 RG12-RG15 SCK1 SDI1 SDO1 SS1 SCK2 SDI2 SDO2 SS2 SCL1 SDA1 SCL2 SDA2 SOSCI SOSCO TMS TCK TDI TDO T1CK T2CK T3CK T4CK T5CK T6CK T7CK T8CK T9CK U1CTS U1RTS U1RX U1TX U2CTS U2RTS U2RX U2TX VDD VCAP/VDDCORE VSS VREF+ VREF- PINOUT I/O DESCRIPTIONS (CONTINUED) Pin Type I/O I/O I/O I/O I O I/O I/O I O I/O I/O I/O I/O I/O I O I I I O I I I I I I I I I I O I O I O I O P P P I I Buffer Type ST ST ST ST ST -- ST ST ST -- ST ST ST ST ST Description PORTG is a bidirectional I/O port. Synchronous serial clock input/output for SPI1. SPI1 data in. SPI1 data out. SPI1 slave synchronization or frame pulse I/O. Synchronous serial clock input/output for SPI2. SPI2 data in. SPI2 data out. SPI2 slave synchronization or frame pulse I/O. Synchronous serial clock input/output for I2C1. Synchronous serial data input/output for I2C1. Synchronous serial clock input/output for I2C2. Synchronous serial data input/output for I2C2. ST/CMOS 32.768 kHz low-power oscillator crystal input; CMOS otherwise. -- 32.768 kHz low-power oscillator crystal output. ST ST ST -- ST ST ST ST ST ST ST ST ST ST -- ST -- ST -- ST -- -- -- -- Analog Analog JTAG Test mode select pin. JTAG test clock input pin. JTAG test data input pin. JTAG test data output pin. Timer1 external clock input. Timer2 external clock input. Timer3 external clock input. Timer4 external clock input. Timer5 external clock input. Timer6 external clock input. Timer7 external clock input. Timer8 external clock input. Timer9 external clock input. UART1 clear to send. UART1 ready to send. UART1 receive. UART1 transmit. UART2 clear to send. UART2 ready to send. UART2 receive. UART2 transmit. Positive supply for peripheral logic and I/O pins. CPU logic filter capacitor connection. Ground reference for logic and I/O pins. Analog voltage reference (high) input. Analog voltage reference (low) input. Analog = Analog input; O = Output; P = Power I = Input Legend: CMOS = CMOS compatible input or output; ST = Schmitt Trigger input with CMOS levels; DS70593B-page 24 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 2.0 GUIDELINES FOR GETTING STARTED WITH 16-BIT DIGITAL SIGNAL CONTROLLERS 2.2 Decoupling Capacitors The use of decoupling capacitors on every pair of power supply pins, such as VDD, VSS, AVDD and AVSS is required. Consider the following criteria when using decoupling capacitors: * Value and type of capacitor: Recommendation of 0.1 F (100 nF), 10-20V. This capacitor should be a low-ESR and have resonance frequency in the range of 20 MHz and higher. It is recommended that ceramic capacitors be used. * Placement on the printed circuit board: The decoupling capacitors should be placed as close to the pins as possible. It is recommended to place the capacitors on the same side of the board as the device. If space is constricted, the capacitor can be placed on another layer on the PCB using a via; however, ensure that the trace length from the pin to the capacitor is within one-quarter inch (6 mm) in length. * Handling high frequency noise: If the board is experiencing high frequency noise, upward of tens of MHz, add a second ceramic-type capacitor in parallel to the above described decoupling capacitor. The value of the second capacitor can be in the range of 0.01 F to 0.001 F. Place this second capacitor next to the primary decoupling capacitor. In high-speed circuit designs, consider implementing a decade pair of capacitances as close to the power and ground pins as possible. For example, 0.1 F in parallel with 0.001 F. * Maximizing performance: On the board layout from the power supply circuit, run the power and return traces to the decoupling capacitors first, and then to the device pins. This ensures that the decoupling capacitors are first in the power chain. Equally important is to keep the trace length between the capacitor and the power pins to a minimum thereby reducing PCB track inductance. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. It is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to the "dsPIC33F/ PIC24H Family Reference Manual". Please see the Microchip web site (www.microchip.com) for the latest dsPIC33F/PIC24H Family Reference Manual sections. 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. 2.1 Basic Connection Requirements Getting started with the dsPIC33FJXXXGPX06A/ X08A/X10A family of 16-bit Digital Signal Controllers (DSCs) requires attention to a minimal set of device pin connections before proceeding with development. The following is a list of pin names, which must always be connected: * All VDD and VSS pins (see Section 2.2 "Decoupling Capacitors") * All AVDD and AVSS pins (regardless if ADC module is not used) (see Section 2.2 "Decoupling Capacitors") * VCAP/VDDCORE (see Section 2.3 "Capacitor on Internal Voltage Regulator (VCAP/VDDCORE)") * MCLR pin (see Section 2.4 "Master Clear (MCLR) Pin") * PGECx/PGEDx pins used for In-Circuit Serial ProgrammingTM (ICSPTM) and debugging purposes (see Section 2.5 "ICSP Pins") * OSC1 and OSC2 pins when external oscillator source is used (see Section 2.6 "External Oscillator Pins") Additionally, the following pins may be required: * VREF+/VREF- pins used when external voltage reference for ADC module is implemented Note: The AVDD and AVSS pins must be connected independent of the ADC voltage reference source. 2009 Microchip Technology Inc. Preliminary DS70593B-page 25 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 2-1: RECOMMENDED MINIMUM CONNECTION 0.1 F Ceramic 2.4 Master Clear (MCLR) Pin The MCLR pin provides for two specific device functions: * Device Reset * Device programming and debugging During device programming and debugging, the resistance and capacitance that can be added to the pin must be considered. Device programmers and debuggers drive the MCLR pin. Consequently, specific voltage levels (VIH and VIL) and fast signal transitions must not be adversely affected. Therefore, specific values of R and C will need to be adjusted based on the application and PCB requirements. VDD VCAP/VDDCORE R R1 MCLR C dsPIC33F VSS VDD VDD VSS AVDD AVSS VDD VSS VDD VSS 0.1 F Ceramic 0.1 F Ceramic 10 0.1 F Ceramic 0.1 F Ceramic For example, as shown in Figure 2-2, it is recommended that the capacitor C, be isolated from the MCLR pin during programming and debugging operations. Place the components shown in Figure 2-2 within one-quarter inch (6 mm) from the MCLR pin. 2.2.1 TANK CAPACITORS FIGURE 2-2: On boards with power traces running longer than six inches in length, it is suggested to use a tank capacitor for integrated circuits including DSCs to supply a local power source. The value of the tank capacitor should be determined based on the trace resistance that connects the power supply source to the device, and the maximum current drawn by the device in the application. In other words, select the tank capacitor so that it meets the acceptable voltage sag at the device. Typical values range from 4.7 F to 47 F. EXAMPLE OF MCLR PIN CONNECTIONS VDD R R1 MCLR JP C dsPIC33F 2.3 Capacitor on Internal Voltage Regulator (VCAP/VDDCORE) Note 1: A low-ESR (< 5 Ohms) capacitor is required on the VCAP/VDDCORE pin, which is used to stabilize the voltage regulator output voltage. The VCAP/VDDCORE pin must not be connected to VDD, and must have a capacitor between 4.7 F and 10 F, 16V connected to ground. The type can be ceramic or tantalum. Refer to Section 25.0 "Electrical Characteristics" for additional information. The placement of this capacitor should be close to the VCAP/VDDCORE. It is recommended that the trace length not exceed one-quarter inch (6 mm). Refer to Section 22.2 "On-Chip Voltage Regulator" for details. R 10 k is recommended. A suggested starting value is 10 k. Ensure that the MCLR pin VIH and VIL specifications are met. R1 470 will limit any current flowing into MCLR from the external capacitor C, in the event of MCLR pin breakdown, due to Electrostatic Discharge (ESD) or Electrical Overstress (EOS). Ensure that the MCLR pin VIH and VIL specifications are met. 2: DS70593B-page 26 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 2.5 ICSP Pins 2.6 External Oscillator Pins The PGECx and PGEDx pins are used for In-Circuit Serial ProgrammingTM (ICSPTM) and debugging purposes. It is recommended to keep the trace length between the ICSP connector and the ICSP pins on the device as short as possible. If the ICSP connector is expected to experience an ESD event, a series resistor is recommended, with the value in the range of a few tens of Ohms, not to exceed 100 Ohms. Pull-up resistors, series diodes, and capacitors on the PGECx and PGEDx pins are not recommended as they will interfere with the programmer/debugger communications to the device. If such discrete components are an application requirement, they should be removed from the circuit during programming and debugging. Alternatively, refer to the AC/DC characteristics and timing requirements information in the respective device Flash programming specification for information on capacitive loading limits and pin input voltage high (VIH) and input low (VIL) requirements. Ensure that the "Communication Channel Select" (i.e., PGECx/PGEDx pins) programmed into the device matches the physical connections for the ICSP to MPLAB(R) ICD 2, MPLAB ICD 3 or MPLAB REAL ICETM. For more information on ICD 2, ICD 3 and REAL ICE connection requirements, refer to the following documents that are available on the Microchip website. * "MPLAB(R) ICD 2 In-Circuit Debugger User's Guide" DS51331 * "Using MPLAB(R) ICD 2" (poster) DS51265 * "MPLAB(R) ICD 2 Design Advisory" DS51566 * "Using MPLAB(R) ICD 3 In-Circuit Debugger" (poster) DS51765 * "MPLAB(R) ICD 3 Design Advisory" DS51764 * "MPLAB(R) REAL ICETM In-Circuit Emulator User's Guide" DS51616 * "Using MPLAB(R) REAL ICETM" (poster) DS51749 Many DSCs have options for at least two oscillators: a high-frequency primary oscillator and a low-frequency secondary oscillator (refer to Section 9.0 "Oscillator Configuration" for details). The oscillator circuit should be placed on the same side of the board as the device. Also, place the oscillator circuit close to the respective oscillator pins, not exceeding one-half inch (12 mm) distance between them. The load capacitors should be placed next to the oscillator itself, on the same side of the board. Use a grounded copper pour around the oscillator circuit to isolate them from surrounding circuits. The grounded copper pour should be routed directly to the MCU ground. Do not run any signal traces or power traces inside the ground pour. Also, if using a two-sided board, avoid any traces on the other side of the board where the crystal is placed. A suggested layout is shown in Figure 2-3. FIGURE 2-3: SUGGESTED PLACEMENT OF THE OSCILLATOR CIRCUIT Main Oscillator 13 Guard Ring 14 15 Guard Trace Secondary Oscillator 16 17 18 19 20 2009 Microchip Technology Inc. Preliminary DS70593B-page 27 dsPIC33FJXXXGPX06A/X08A/X10A 2.7 Oscillator Value Conditions on Device Start-up If the PLL of the target device is enabled and configured for the device start-up oscillator, the maximum oscillator source frequency must be limited to 4 MHz < FIN < 8 MHz to comply with device PLL start-up conditions. This means that if the external oscillator frequency is outside this range, the application must start-up in the FRC mode first. The default PLL settings after a POR with an oscillator frequency outside this range will violate the device operating speed. Once the device powers up, the application firmware can initialize the PLL SFRs, CLKDIV and PLLDBF to a suitable value, and then perform a clock switch to the Oscillator + PLL clock source. Note that clock switching must be enabled in the device Configuration word. 2.8 Configuration of Analog and Digital Pins During ICSP Operations If MPLAB ICD 2, ICD 3 or REAL ICE is selected as a debugger, it automatically initializes all of the A/D input pins (ANx) as "digital" pins, by setting all bits in the ADPCFG and ADPCFG2 registers. The bits in the registers that correspond to the A/D pins that are initialized by MPLAB ICD 2, ICD 3 or REAL ICE, must not be cleared by the user application firmware; otherwise, communication errors will result between the debugger and the device. If your application needs to use certain A/D pins as analog input pins during the debug session, the user application must clear the corresponding bits in the ADPCFG and ADPCFG2 registers during initialization of the ADC module. When MPLAB ICD 2, ICD 3 or REAL ICE is used as a programmer, the user application firmware must correctly configure the ADPCFG and ADPCFG2 registers. Automatic initialization of these registers is only done during debugger operation. Failure to correctly configure the register(s) will result in all A/D pins being recognized as analog input pins, resulting in the port value being read as a logic `0', which may affect user application functionality. 2.9 Unused I/Os Unused I/O pins should be configured as outputs and driven to a logic-low state. Alternatively, connect a 1k to 10k resistor to VSS on unused pins and drive the output to logic low. DS70593B-page 28 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 3.0 CPU Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 2. "CPU" (DS70204) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The dsPIC33FJXXXGPX06A/X08A/X10A CPU module has a 16-bit (data) modified Harvard architecture with an enhanced instruction set, including significant support for DSP. The CPU has a 24-bit instruction word with a variable length opcode field. The Program Counter (PC) is 23 bits wide and addresses up to 4M x 24 bits of user program memory space. The actual amount of program memory implemented varies by device. A single-cycle instruction prefetch mechanism is used to help maintain throughput and provides predictable execution. All instructions execute in a single cycle, with the exception of instructions that change the program flow, the double word move (MOV.D) instruction and the table instructions. Overhead-free program loop constructs are supported using the DO and REPEAT instructions, both of which are interruptible at any point. The dsPIC33FJXXXGPX06A/X08A/X10A devices have sixteen, 16-bit working registers in the programmer's model. Each of the working registers can serve as a data, address or address offset register. The 16th working register (W15) operates as a software Stack Pointer (SP) for interrupts and calls. The dsPIC33FJXXXGPX06A/X08A/X10A instruction set has two classes of instructions: MCU and DSP. These two instruction classes are seamlessly integrated into a single CPU. The instruction set includes many addressing modes and is designed for optimum C compiler efficiency. For most instructions, the dsPIC33FJXXXGPX06A/X08A/X10A is capable of executing a data (or program data) memory read, a working register (data) read, a data memory write and a program (instruction) memory read per instruction cycle. As a result, three parameter instructions can be supported, allowing A + B = C operations to be executed in a single cycle. A block diagram of the CPU is shown in Figure 3-1. The programmer's model for the dsPIC33FJXXXGPX06A/ X08A/X10A is shown in Figure 3-2. dent Address Generation Unit (AGU). The MCU class of instructions operates solely through the X memory AGU, which accesses the entire memory map as one linear data space. Certain DSP instructions operate through the X and Y AGUs to support dual operand reads, which splits the data address space into two parts. The X and Y data space boundary is device-specific. Overhead-free circular buffers (Modulo Addressing mode) are supported in both X and Y address spaces. The Modulo Addressing removes the software boundary checking overhead for DSP algorithms. Furthermore, the X AGU circular addressing can be used with any of the MCU class of instructions. The X AGU also supports Bit-Reversed Addressing to greatly simplify input or output data reordering for radix-2 FFT algorithms. The upper 32 Kbytes of the data space memory map can optionally be mapped into program space at any 16K program word boundary defined by the 8-bit Program Space Visibility Page (PSVPAG) register. The program to data space mapping feature lets any instruction access program space as if it were data space. The data space also includes 2 Kbytes of DMA RAM, which is primarily used for DMA data transfers, but may be used as general purpose RAM. 3.2 DSP Engine Overview The DSP engine features a high-speed, 17-bit by 17-bit multiplier, a 40-bit ALU, two 40-bit saturating accumulators and a 40-bit bidirectional barrel shifter. The barrel shifter is capable of shifting a 40-bit value, up to 16 bits right or left, in a single cycle. The DSP instructions operate seamlessly with all other instructions and have been designed for optimal real-time performance. The MAC instruction and other associated instructions can concurrently fetch two data operands from memory while multiplying two W registers and accumulating and optionally saturating the result in the same cycle. This instruction functionality requires that the RAM memory data space be split for these instructions and linear for all others. Data space partitioning is achieved in a transparent and flexible manner through dedicating certain working registers to each address space. 3.3 Special MCU Features The dsPIC33FJXXXGPX06A/X08A/X10A features a 17-bit by 17-bit, single-cycle multiplier that is shared by both the MCU ALU and DSP engine. The multiplier can perform signed, unsigned and mixed-sign multiplication. Using a 17-bit by 17-bit multiplier for 16-bit by 16-bit multiplication not only allows you to perform mixed-sign multiplication, it also achieves accurate results for special operations, such as (-1.0) x (-1.0). The dsPIC33FJXXXGPX06A/X08A/X10A supports 16/16 and 32/16 divide operations, both fractional and integer. All divide instructions are iterative operations. They must be executed within a REPEAT loop, resulting in a total execution time of 19 instruction cycles. The divide operation can be interrupted during any of those 19 cycles without loss of data. A 40-bit barrel shifter is used to perform up to a 16-bit, left or right shift in a single cycle. The barrel shifter can be used by both MCU and DSP instructions. DS70593B-page 29 3.1 Data Addressing Overview The data space can be addressed as 32K words or 64 Kbytes and is split into two blocks, referred to as X and Y data memory. Each memory block has its own indepen- 2009 Microchip Technology Inc. Preliminary dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 3-1: PSV and Table Data Access Control Block Interrupt Controller 8 16 dsPIC33FJXXXGPX06A/X08A/X10A CPU CORE BLOCK DIAGRAM Y Data Bus X Data Bus 16 16 16 Data Latch Data Latch DMA Y RAM Address Latch RAM 16 23 23 PCU PCH PCL Program Counter Loop Stack Control Control Logic Logic X RAM Address Latch 23 16 Address Latch 16 DMA Controller Address Generator Units Program Memory EA MUX Data Latch 24 ROM Latch 16 Literal Data 16 Instruction Decode and Control Instruction Reg 16 Control Signals to Various Blocks DSP Engine Divide Support 16 x 16 W Register Array 16 16-bit ALU 16 To Peripheral Modules DS70593B-page 30 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 3-2: dsPIC33FJXXXGPX06A/X08A/X10A PROGRAMMER'S MODEL D15 W0/WREG W1 W2 W3 W4 DSP Operand Registers W5 W6 W7 W8 DSP Address Registers W9 W10 W11 W12/DSP Offset W13/DSP Write Back W14/Frame Pointer W15/Stack Pointer Working Registers DO Shadow D0 PUSH.S Shadow Legend SPLIM AD39 DSP Accumulators PC22 AccA AccB PC0 0 7 TBLPAG 7 PSVPAG 0 Program Space Visibility Page Address 15 RCOUNT 15 DCOUNT 22 DOSTART 22 DOEND 15 CORCON 0 0 0 0 0 Data Table Page Address AD31 Stack Pointer Limit Register AD15 AD0 Program Counter REPEAT Loop Counter DO Loop Counter DO Loop Start Address DO Loop End Address Core Configuration Register OA OB SA SB OAB SAB DA SRH DC IPL2 IPL1 IPL0 RA SRL N OV Z C STATUS Register 2009 Microchip Technology Inc. Preliminary DS70593B-page 31 dsPIC33FJXXXGPX06A/X08A/X10A 3.4 CPU Control Registers CPU control registers include: * SR: CPU STATUS REGISTER * CORCON: CORE CONTROL REGISTER REGISTER 3-1: R-0 OA bit 15 R/W-0(2) bit 7 Legend: C = Clear only bit S = Set only bit `1' = Bit is set bit 15 SR: CPU STATUS REGISTER R-0 OB R/C-0 SA (1) R/C-0 SB(1) R-0 OAB R/C-0 SAB R -0 DA R/W-0 DC bit 8 R/W-0(3) IPL<2:0>(2) R/W-0(3) R-0 RA R/W-0 N R/W-0 OV R/W-0 Z R/W-0 C bit 0 R = Readable bit W = Writable bit `0' = Bit is cleared U = Unimplemented bit, read as `0' -n = Value at POR x = Bit is unknown OA: Accumulator A Overflow Status bit 1 = Accumulator A overflowed 0 = Accumulator A has not overflowed OB: Accumulator B Overflow Status bit 1 = Accumulator B overflowed 0 = Accumulator B has not overflowed SA: Accumulator A Saturation `Sticky' Status bit(1) 1 = Accumulator A is saturated or has been saturated at some time 0 = Accumulator A is not saturated SB: Accumulator B Saturation `Sticky' Status bit(1) 1 = Accumulator B is saturated or has been saturated at some time 0 = Accumulator B is not saturated OAB: OA || OB Combined Accumulator Overflow Status bit 1 = Accumulators A or B have overflowed 0 = Neither Accumulators A or B have overflowed SAB: SA || SB Combined Accumulator `Sticky' Status bit 1 = Accumulators A or B are saturated or have been saturated at some time in the past 0 = Neither Accumulator A or B are saturated Note: This bit may be read or cleared (not set). Clearing this bit will clear SA and SB. DA: DO Loop Active bit 1 = DO loop in progress 0 = DO loop not in progress bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 Note 1: This bit may be read or cleared (not set). 2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when IPL<3> = 1. 3: The IPL<2:0> Status bits are read only when NSTDIS = 1 (INTCON1<15>). DS70593B-page 32 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 3-1: bit 8 SR: CPU STATUS REGISTER (CONTINUED) DC: MCU ALU Half Carry/Borrow bit 1 = A carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized data) of the result occurred 0 = No carry-out from the 4th low-order bit (for byte sized data) or 8th low-order bit (for word sized data) of the result occurred IPL<2:0>: CPU Interrupt Priority Level Status bits(2) 111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled 110 = CPU Interrupt Priority Level is 6 (14) 101 = CPU Interrupt Priority Level is 5 (13) 100 = CPU Interrupt Priority Level is 4 (12) 011 = CPU Interrupt Priority Level is 3 (11) 010 = CPU Interrupt Priority Level is 2 (10) 001 = CPU Interrupt Priority Level is 1 (9) 000 = CPU Interrupt Priority Level is 0 (8) RA: REPEAT Loop Active bit 1 = REPEAT loop in progress 0 = REPEAT loop not in progress N: MCU ALU Negative bit 1 = Result was negative 0 = Result was non-negative (zero or positive) OV: MCU ALU Overflow bit This bit is used for signed arithmetic (2's complement). It indicates an overflow of the magnitude which causes the sign bit to change state. 1 = Overflow occurred for signed arithmetic (in this arithmetic operation) 0 = No overflow occurred Z: MCU ALU Zero bit 1 = An operation which affects the Z bit has set it at some time in the past 0 = The most recent operation which affects the Z bit has cleared it (i.e., a non-zero result) C: MCU ALU Carry/Borrow bit 1 = A carry-out from the Most Significant bit of the result occurred 0 = No carry-out from the Most Significant bit of the result occurred 2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when IPL<3> = 1. 3: The IPL<2:0> Status bits are read only when NSTDIS = 1 (INTCON1<15>). bit 7-5 bit 4 bit 3 bit 2 bit 1 bit 0 Note 1: This bit may be read or cleared (not set). 2009 Microchip Technology Inc. Preliminary DS70593B-page 33 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 3-2: U-0 -- bit 15 R/W-0 SATA bit 7 Legend: R = Readable bit 0' = Bit is cleared bit 15-13 bit 12 CORCON: CORE CONTROL REGISTER U-0 -- U-0 -- R/W-0 US R/W-0 EDT(1) R-0 R-0 DL<2:0> R-0 bit 8 R/W-0 SATB R/W-1 SATDW R/W-0 ACCSAT R/C-0 IPL3(2) R/W-0 PSV R/W-0 RND R/W-0 IF bit 0 C = Clear only bit W = Writable bit `x = Bit is unknown -n = Value at POR `1' = Bit is set U = Unimplemented bit, read as `0' bit 11 bit 10-8 Unimplemented: Read as `0' US: DSP Multiply Unsigned/Signed Control bit 1 = DSP engine multiplies are unsigned 0 = DSP engine multiplies are signed EDT: Early DO Loop Termination Control bit(1) 1 = Terminate executing DO loop at end of current loop iteration 0 = No effect DL<2:0>: DO Loop Nesting Level Status bits 111 = 7 DO loops active * * * bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 001 = 1 DO loop active 000 = 0 DO loops active SATA: AccA Saturation Enable bit 1 = Accumulator A saturation enabled 0 = Accumulator A saturation disabled SATB: AccB Saturation Enable bit 1 = Accumulator B saturation enabled 0 = Accumulator B saturation disabled SATDW: Data Space Write from DSP Engine Saturation Enable bit 1 = Data space write saturation enabled 0 = Data space write saturation disabled ACCSAT: Accumulator Saturation Mode Select bit 1 = 9.31 saturation (super saturation) 0 = 1.31 saturation (normal saturation) IPL3: CPU Interrupt Priority Level Status bit 3(2) 1 = CPU interrupt priority level is greater than 7 0 = CPU interrupt priority level is 7 or less PSV: Program Space Visibility in Data Space Enable bit 1 = Program space visible in data space 0 = Program space not visible in data space RND: Rounding Mode Select bit 1 = Biased (conventional) rounding enabled 0 = Unbiased (convergent) rounding enabled IF: Integer or Fractional Multiplier Mode Select bit 1 = Integer mode enabled for DSP multiply ops 0 = Fractional mode enabled for DSP multiply ops Note 1: This bit will always read as `0'. 2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU interrupt priority level. DS70593B-page 34 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 3.5 Arithmetic Logic Unit (ALU) 3.6 DSP Engine The dsPIC33FJXXXGPX06A/X08A/X10A ALU is 16 bits wide and is capable of addition, subtraction, bit shifts and logic operations. Unless otherwise mentioned, arithmetic operations are 2's complement in nature. Depending on the operation, the ALU may affect the values of the Carry (C), Zero (Z), Negative (N), Overflow (OV) and Digit Carry (DC) Status bits in the SR register. The C and DC Status bits operate as Borrow and Digit Borrow bits, respectively, for subtraction operations. The ALU can perform 8-bit or 16-bit operations, depending on the mode of the instruction that is used. Data for the ALU operation can come from the W register array, or data memory, depending on the addressing mode of the instruction. Likewise, output data from the ALU can be written to the W register array or a data memory location. Refer to the "dsPIC30F/33F Programmer's Reference Manual" (DS70157) for information on the SR bits affected by each instruction. The dsPIC33FJXXXGPX06A/X08A/X10A CPU incorporates hardware support for both multiplication and division. This includes a dedicated hardware multiplier and support hardware for 16-bit-divisor division. The DSP engine consists of a high-speed, 17-bit x 17-bit multiplier, a barrel shifter and a 40-bit adder/subtracter (with two target accumulators, round and saturation logic). The dsPIC33FJXXXGPX06A/X08A/X10A is a single-cycle, instruction flow architecture; therefore, concurrent operation of the DSP engine with MCU instruction flow is not possible. However, some MCU ALU and DSP engine resources may be used concurrently by the same instruction (e.g., ED, EDAC). The DSP engine also has the capability to perform inherent accumulator-to-accumulator operations which require no additional data. These instructions are ADD, SUB and NEG. The DSP engine has various options selected through various bits in the CPU Core Control register (CORCON), as listed below: 1. 2. 3. 4. 5. 6. 7. Fractional or integer DSP multiply (IF). Signed or unsigned DSP multiply (US). Conventional or convergent rounding (RND). Automatic saturation on/off for AccA (SATA). Automatic saturation on/off for AccB (SATB). Automatic saturation on/off for writes to data memory (SATDW). Accumulator Saturation mode selection (ACCSAT). 3.5.1 MULTIPLIER Using the high-speed 17-bit x 17-bit multiplier of the DSP engine, the ALU supports unsigned, signed or mixed-sign operation in several MCU multiplication modes: 1. 2. 3. 4. 5. 6. 7. 16-bit x 16-bit signed 16-bit x 16-bit unsigned 16-bit signed x 5-bit (literal) unsigned 16-bit unsigned x 16-bit unsigned 16-bit unsigned x 5-bit (literal) unsigned 16-bit unsigned x 16-bit signed 8-bit unsigned x 8-bit unsigned Table 3-1 provides a summary of DSP instructions. A block diagram of the DSP engine is shown in Figure 3-3. TABLE 3-1: Instruction CLR ED EDAC MAC MAC MOVSAC MPY MPY MPY.N MSC DSP INSTRUCTIONS SUMMARY Algebraic Operation A=0 A = (x - y)2 A = A + (x - y)2 A = A + (x * y) A = A + x2 No change in A A=x*y A=x2 A=-x*y A=A-x*y ACC Write Back Yes No No Yes No Yes No No No Yes 3.5.2 DIVIDER The divide block supports 32-bit/16-bit and 16-bit/16-bit signed and unsigned integer divide operations with the following data sizes: 1. 2. 3. 4. 32-bit signed/16-bit signed divide 32-bit unsigned/16-bit unsigned divide 16-bit signed/16-bit signed divide 16-bit unsigned/16-bit unsigned divide The quotient for all divide instructions ends up in W0 and the remainder in W1. 16-bit signed and unsigned DIV instructions can specify any W register for both the 16-bit divisor (Wn) and any W register (aligned) pair (W(m + 1):Wm) for the 32-bit dividend. The divide algorithm takes one cycle per bit of divisor, so both 32-bit/16-bit and 16-bit/16-bit instructions take the same number of cycles to execute. 2009 Microchip Technology Inc. Preliminary DS70593B-page 35 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 3-3: DSP ENGINE BLOCK DIAGRAM 40 Carry/Borrow Out 40-bit Accumulator A 40-bit Accumulator B Saturate Carry/Borrow In Adder Negate S a 40 Round t 16 u Logic r a t e 40 40 40 Barrel Shifter 16 40 Sign-Extend Y Data Bus 32 Zero Backfill 33 32 16 17-bit Multiplier/Scaler 16 16 To/From W Array DS70593B-page 36 Preliminary 2009 Microchip Technology Inc. X Data Bus dsPIC33FJXXXGPX06A/X08A/X10A 3.6.1 MULTIPLIER 3.6.2.1 The 17-bit x 17-bit multiplier is capable of signed or unsigned operation and can multiplex its output using a scaler to support either 1.31 fractional (Q31) or 32-bit integer results. Unsigned operands are zero-extended into the 17th bit of the multiplier input value. Signed operands are sign-extended into the 17th bit of the multiplier input value. The output of the 17-bit x 17-bit multiplier/scaler is a 33-bit value which is sign-extended to 40 bits. Integer data is inherently represented as a signed two's complement value, where the Most Significant bit (MSb) is defined as a sign bit. Generally speaking, the range of an N-bit two's complement integer is -2N-1 to 2N-1 - 1. For a 16-bit integer, the data range is -32768 (0x8000) to 32767 (0x7FFF) including 0. For a 32-bit integer, the data range is -2,147,483,648 (0x8000 0000) to 2,147,483,647 (0x7FFF FFFF). When the multiplier is configured for fractional multiplication, the data is represented as a two's complement fraction, where the MSb is defined as a sign bit and the radix point is implied to lie just after the sign bit (QX format). The range of an N-bit two's complement fraction with this implied radix point is -1.0 to (1 - 21-N). For a 16-bit fraction, the Q15 data range is -1.0 (0x8000) to 0.999969482 (0x7FFF) including 0 and has a precision of 3.01518x10-5. In Fractional mode, the 16 x 16 multiply operation generates a 1.31 product which has a precision of 4.65661 x 10-10. The same multiplier is used to support the MCU multiply instructions which include integer 16-bit signed, unsigned and mixed sign multiplies. The MUL instruction may be directed to use byte or word sized operands. Byte operands will direct a 16-bit result, and word operands will direct a 32-bit result to the specified register(s) in the W array. Adder/Subtracter, Overflow and Saturation The adder/subtracter is a 40-bit adder with an optional zero input into one side, and either true, or complement data into the other input. In the case of addition, the Carry/Borrow input is active-high and the other input is true data (not complemented), whereas in the case of subtraction, the Carry/Borrow input is active-low and the other input is complemented. The adder/subtracter generates Overflow Status bits, SA/SB and OA/OB, which are latched and reflected in the STATUS register: * Overflow from bit 39: this is a catastrophic overflow in which the sign of the accumulator is destroyed. * Overflow into guard bits 32 through 39: this is a recoverable overflow. This bit is set whenever all the guard bits are not identical to each other. The adder has an additional saturation block which controls accumulator data saturation, if selected. It uses the result of the adder, the Overflow Status bits described above and the SAT 3.6.2 DATA ACCUMULATORS AND ADDER/SUBTRACTER 4. The data accumulator consists of a 40-bit adder/ subtracter with automatic sign extension logic. It can select one of two accumulators (A or B) as its pre-accumulation source and post-accumulation destination. For the ADD and LAC instructions, the data to be accumulated or loaded can be optionally scaled via the barrel shifter prior to accumulation. 5. 6. The OA and OB bits are modified each time data passes through the adder/subtracter. When set, they indicate that the most recent operation has overflowed into the accumulator guard bits (bits 32 through 39). The OA and OB bits can also optionally generate an arithmetic warning trap when set and the corresponding Overflow Trap Flag Enable bits (OVATE, OVBTE) in the INTCON1 register (refer to Section 7.0 "Interrupt Controller") are set. This allows the user to take immediate action, for example, to correct system gain. 2009 Microchip Technology Inc. Preliminary DS70593B-page 37 dsPIC33FJXXXGPX06A/X08A/X10A The SA and SB bits are modified each time data passes through the adder/subtracter, but can only be cleared by the user. When set, they indicate that the accumulator has overflowed its maximum range (bit 31 for 32-bit saturation or bit 39 for 40-bit saturation) and will be saturated (if saturation is enabled). When saturation is not enabled, SA and SB default to bit 39 overflow and, thus, indicate that a catastrophic overflow has occurred. If the COVTE bit in the INTCON1 register is set, SA and SB bits will generate an arithmetic warning trap when saturation is disabled. The Overflow and Saturation Status bits can optionally be viewed in the STATUS Register (SR) as the logical OR of OA and OB (in bit OAB) and the logical OR of SA and SB (in bit SAB). This allows programmers to check one bit in the STATUS register to determine if either accumulator has overflowed, or one bit to determine if either accumulator has saturated. This would be useful for complex number arithmetic which typically uses both the accumulators. The device supports three Saturation and Overflow modes: 1. Bit 39 Overflow and Saturation: When bit 39 overflow and saturation occurs, the saturation logic loads the maximally positive 9.31 (0x7FFFFFFFFF), or maximally negative 9.31 value (0x8000000000), into the target accumulator. The SA or SB bit is set and remains set until cleared by the user. This is referred to as `super saturation' and provides protection against erroneous data or unexpected algorithm problems (e.g., gain calculations). Bit 31 Overflow and Saturation: When bit 31 overflow and saturation occurs, the saturation logic then loads the maximally positive 1.31 value (0x007FFFFFFF), or maximally negative 1.31 value (0x0080000000), into the target accumulator. The SA or SB bit is set and remains set until cleared by the user. When this Saturation mode is in effect, the guard bits are not used (so the OA, OB or OAB bits are never set). Bit 39 Catastrophic Overflow: The bit 39 Overflow Status bit from the adder is used to set the SA or SB bit, which remains set until cleared by the user. No saturation operation is performed and the accumulator is allowed to overflow (destroying its sign). If the COVTE bit in the INTCON1 register is set, a catastrophic overflow can initiate a trap exception. 3.6.2.2 Accumulator `Write Back' The MAC class of instructions (with the exception of MPY, MPY.N, ED and EDAC) can optionally write a rounded version of the high word (bits 31 through 16) of the accumulator that is not targeted by the instruction into data space memory. The write is performed across the X bus into combined X and Y address space. The following addressing modes are supported: 1. W13, Register Direct: The rounded contents of the non-target accumulator are written into W13 as a 1.15 fraction. [W13]+ = 2, Register Indirect with Post-Increment: The rounded contents of the non-target accumulator are written into the address pointed to by W13 as a 1.15 fraction. W13 is then incremented by 2 (for a word write). 2. 3.6.2.3 Round Logic The round logic is a combinational block which performs a conventional (biased) or convergent (unbiased) round function during an accumulator write (store). The Round mode is determined by the state of the RND bit in the CORCON register. It generates a 16-bit, 1.15 data value which is passed to the data space write saturation logic. If rounding is not indicated by the instruction, a truncated 1.15 data value is stored and the least significant word is simply discarded. Conventional rounding zero-extends bit 15 of the accumulator and adds it to the ACCxH word (bits 16 through 31 of the accumulator). If the ACCxL word (bits 0 through 15 of the accumulator) is between 0x8000 and 0xFFFF (0x8000 included), ACCxH is incremented. If ACCxL is between 0x0000 and 0x7FFF, ACCxH is left unchanged. A consequence of this algorithm is that over a succession of random rounding operations, the value tends to be biased slightly positive. Convergent (or unbiased) rounding operates in the same manner as conventional rounding, except when ACCxL equals 0x8000. In this case, the Least Significant bit (bit 16 of the accumulator) of ACCxH is examined. If it is `1', ACCxH is incremented. If it is `0', ACCxH is not modified. Assuming that bit 16 is effectively random in nature, this scheme removes any rounding bias that may accumulate. The SAC and SAC.R instructions store either a truncated (SAC), or rounded (SAC.R) version of the contents of the target accumulator to data memory via the X bus, subject to data saturation (see Section 3.6.2.4 "Data Space Write Saturation"). For the MAC class of instructions, the accumulator write-back operation will function in the same manner, addressing combined MCU (X and Y) data space though the X bus. For this class of instructions, the data is always subject to rounding. 2. 3. DS70593B-page 38 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 3.6.2.4 Data Space Write Saturation 3.6.3 BARREL SHIFTER In addition to adder/subtracter saturation, writes to data space can also be saturated but without affecting the contents of the source accumulator. The data space write saturation logic block accepts a 16-bit, 1.15 fractional value from the round logic block as its input, together with overflow status from the original source (accumulator) and the 16-bit round adder. These inputs are combined and used to select the appropriate 1.15 fractional value as output to write to data space memory. If the SATDW bit in the CORCON register is set, data (after rounding or truncation) is tested for overflow and adjusted accordingly, For input data greater than 0x007FFF, data written to memory is forced to the maximum positive 1.15 value, 0x7FFF. For input data less than 0xFF8000, data written to memory is forced to the maximum negative 1.15 value, 0x8000. The Most Significant bit of the source (bit 39) is used to determine the sign of the operand being tested. If the SATDW bit in the CORCON register is not set, the input data is always passed through unmodified under all conditions. The barrel shifter is capable of performing up to 16-bit arithmetic or logic right shifts, or up to 16-bit left shifts in a single cycle. The source can be either of the two DSP accumulators or the X bus (to support multi-bit shifts of register or memory data). The shifter requires a signed binary value to determine both the magnitude (number of bits) and direction of the shift operation. A positive value shifts the operand right. A negative value shifts the operand left. A value of `0' does not modify the operand. The barrel shifter is 40 bits wide, thereby obtaining a 40-bit result for DSP shift operations and a 16-bit result for MCU shift operations. Data from the X bus is presented to the barrel shifter between bit positions 16 to 31 for right shifts, and between bit positions 0 to 16 for left shifts. 2009 Microchip Technology Inc. Preliminary DS70593B-page 39 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 40 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 4.0 Note: MEMORY ORGANIZATION This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 3. "Data Memory" (DS70202) and Section 4. "Program Memory" (DS70203) in the "dsPIC33F/PIC24H Family Reference Manual", which are available from the Microchip web site (www.microchip.com). 4.1 Program Address Space The program address memory space of the dsPIC33FJXXXGPX06A/X08A/X10A devices is 4M instructions. The space is addressable by a 24-bit value derived from either the 23-bit Program Counter (PC) during program execution, or from table operation or data space remapping as described in Section 4.6 "Interfacing Program and Data Memory Spaces". User access to the program memory space is restricted to the lower half of the address range (0x000000 to 0x7FFFFF). The exception is the use of TBLRD/TBLWT operations, which use TBLPAG<7> to permit access to the Configuration bits and Device ID sections of the configuration memory space. Memory usage for the dsPIC33FJXXXGPX06A/X08A/X10A of devices is shown in Figure 4-1. The dsPIC33FJXXXGPX06A/X08A/X10A architecture features separate program and data memory spaces and buses. This architecture also allows the direct access of program memory from the data space during code execution. FIGURE 4-1: PROGRAM MEMORY FOR dsPIC33FJXXXGPX06A/X08A/X10A DEVICES dsPIC33FJ64GPXXXA GOTO Instruction Reset Address Interrupt Vector Table Reserved Alternate Vector Table dsPIC33FJ128GPXXXA GOTO Instruction Reset Address Interrupt Vector Table Reserved Alternate Vector Table dsPIC33FJ256GPXXXA GOTO Instruction Reset Address Interrupt Vector Table Reserved Alternate Vector Table 0x000000 0x000002 0x000004 0x0000FE 0x000100 0x000104 0x0001FE 0x000200 User Memory Space User Program Flash Memory (22K instructions) User Program Flash Memory (44K instructions) User Program Flash Memory (88K instructions) 0x00ABFE 0x00AC00 0x0157FE 0x015800 Unimplemented (Read `0's) Unimplemented (Read `0's) Unimplemented (Read `0's) 0x7FFFFE 0x800000 0x02ABFE 0x02AC00 Reserved Configuration Memory Space Reserved Reserved Device Configuration Registers Device Configuration Registers Device Configuration Registers 0xF7FFFE 0xF80000 0xF80017 0xF80010 Reserved Reserved Reserved DEVID (2) Note: Memory areas are not shown to scale. DEVID (2) DEVID (2) 0xFEFFFE 0xFF0000 0xFFFFFE 2009 Microchip Technology Inc. Preliminary DS70593B-page 41 dsPIC33FJXXXGPX06A/X08A/X10A 4.1.1 PROGRAM MEMORY ORGANIZATION 4.1.2 INTERRUPT AND TRAP VECTORS The program memory space is organized in word-addressable blocks. Although it is treated as 24 bits wide, it is more appropriate to think of each address of the program memory as a lower and upper word, with the upper byte of the upper word being unimplemented. The lower word always has an even address, while the upper word has an odd address (Figure 4-2). Program memory addresses are always word-aligned on the lower word, and addresses are incremented or decremented by two during code execution. This arrangement also provides compatibility with data memory space addressing and makes it possible to access data in the program memory space. All dsPIC33FJXXXGPX06A/X08A/X10A devices reserve the addresses between 0x00000 and 0x000200 for hard-coded program execution vectors. A hardware Reset vector is provided to redirect code execution from the default value of the PC on device Reset to the actual start of code. A GOTO instruction is programmed by the user at 0x000000, with the actual address for the start of code at 0x000002. dsPIC33FJXXXGPX06A/X08A/X10A devices also have two interrupt vector tables, located from 0x000004 to 0x0000FF and 0x000100 to 0x0001FF. These vector tables allow each of the many device interrupt sources to be handled by separate Interrupt Service Routines (ISRs). A more detailed discussion of the interrupt vector tables is provided in Section 7.1 "Interrupt Vector Table". FIGURE 4-2: msw Address 0x000001 0x000003 0x000005 0x000007 PROGRAM MEMORY ORGANIZATION most significant word 23 00000000 00000000 00000000 00000000 Program Memory `Phantom' Byte (read as `0') Instruction Width 16 least significant word 8 0 0x000000 0x000002 0x000004 0x000006 PC Address (lsw Address) DS70593B-page 42 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 4.2 Data Address Space The dsPIC33FJXXXGPX06A/X08A/X10A CPU has a separate 16-bit wide data memory space. The data space is accessed using separate Address Generation Units (AGUs) for read and write operations. Data memory maps of devices with different RAM sizes are shown in Figure 4-3 through Figure 4-5. All Effective Addresses (EAs) in the data memory space are 16 bits wide and point to bytes within the data space. This arrangement gives a data space address range of 64 Kbytes or 32K words. The lower half of the data memory space (that is, when EA<15> = 0) is used for implemented memory addresses, while the upper half (EA<15> = 1) is reserved for the Program Space Visibility area (see Section 4.6.3 "Reading Data from Program Memory Using Program Space Visibility"). dsPIC33FJXXXGPX06A/X08A/X10A devices implement a total of up to 30 Kbytes of data memory. Should an EA point to a location outside of this area, an all-zero word or byte will be returned. All word accesses must be aligned to an even address. Misaligned word data fetches are not supported, so care must be taken when mixing byte and word operations, or translating from 8-bit MCU code. If a misaligned read or write is attempted, an address error trap is generated. If the error occurred on a read, the instruction underway is completed; if it occurred on a write, the instruction will be executed but the write does not occur. In either case, a trap is then executed, allowing the system and/or user to examine the machine state prior to execution of the address Fault. All byte loads into any W register are loaded into the Least Significant Byte. The Most Significant Byte is not modified. A sign-extend instruction (SE) is provided to allow users to translate 8-bit signed data to 16-bit signed values. Alternatively, for 16-bit unsigned data, users can clear the MSb of any W register by executing a zero-extend (ZE) instruction on the appropriate address. 4.2.1 DATA SPACE WIDTH 4.2.3 SFR SPACE The data memory space is organized in byte addressable, 16-bit wide blocks. Data is aligned in data memory and registers as 16-bit words, but all data space EAs resolve to bytes. The Least Significant Bytes (LSBs) of each word have even addresses, while the Most Significant Bytes (MSBs) have odd addresses. The first 2 Kbytes of the Near Data Space, from 0x0000 to 0x07FF, is primarily occupied by Special Function Registers (SFRs). These are used by the dsPIC33FJXXXGPX06A/X08A/X10A core and peripheral modules for controlling the operation of the device. SFRs are distributed among the modules that they control, and are generally grouped together by module. Much of the SFR space contains unused addresses; these are read as `0'. A complete listing of implemented SFRs, including their addresses, is shown in Table 4-1 through Table 4-34. Note: The actual set of peripheral features and interrupts varies by the device. Please refer to the corresponding device tables and pinout diagrams for device-specific information. 4.2.2 DATA MEMORY ORGANIZATION AND ALIGNMENT To maintain backward compatibility with PIC(R) MCU devices and improve data space memory usage efficiency, the dsPIC33FJXXXGPX06A/X08A/X10A instruction set supports both word and byte operations. As a consequence of byte accessibility, all effective address calculations are internally scaled to step through word-aligned memory. For example, the core recognizes that Post-Modified Register Indirect Addressing mode [Ws++] will result in a value of Ws + 1 for byte operations and Ws + 2 for word operations. Data byte reads will read the complete word that contains the byte, using the LSb of any EA to determine which byte to select. The selected byte is placed onto the LSb of the data path. That is, data memory and registers are organized as two parallel byte-wide entities with shared (word) address decode but separate write lines. Data byte writes only write to the corresponding side of the array or register which matches the byte address. 4.2.4 NEAR DATA SPACE The 8-Kbyte area between 0x0000 and 0x1FFF is referred to as the Near Data Space. Locations in this space are directly addressable via a 13-bit absolute address field within all memory direct instructions. Additionally, the whole data space is addressable using MOV instructions, which support Memory Direct Addressing mode with a 16-bit address field, or by using Indirect Addressing mode using a working register as an Address Pointer. 2009 Microchip Technology Inc. Preliminary DS70593B-page 43 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 4-3: DATA MEMORY MAP FOR dsPIC33FJXXXGPX06A/X08A/X10A DEVICES WITH 8 KBS RAM MSB Address MSB 2 Kbyte SFR Space 0x0001 SFR Space 0x07FF 0x0801 X Data RAM (X) 8 Kbyte SRAM Space 0x17FF 0x1801 Y Data RAM (Y) 0x1FFF 0x2001 0x27FF 0x2801 DMA RAM 0x1FFE 0x2000 0x27FE 0x2800 0x17FE 0x1800 0x07FE 0x0800 8 Kbyte Near Data Space LSB Address LSB 0x0000 16 bits 0x8001 0x8000 Optionally Mapped into Program Memory X Data Unimplemented (X) 0xFFFF 0xFFFE DS70593B-page 44 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 4-4: DATA MEMORY MAP FOR dsPIC33FJXXXGPX06A/X08A/X10A DEVICES WITH 16 KBS RAM MSB Address MSB 2 Kbyte SFR Space 0x0001 SFR Space 0x07FF 0x0801 X Data RAM (X) 0x1FFE 0x27FE 0x2800 Y Data RAM (Y) 0x3FFF 0x4001 0x47FF 0x4801 DMA RAM 0x3FFE 0x4000 0x47FE 0x4800 0x07FE 0x0800 8 Kbyte Near Data Space LSB Address LSB 0x0000 16 bits 0x1FFF 16 Kbyte SRAM Space 0x27FF 0x2801 0x8001 0x8000 X Data Unimplemented (X) Optionally Mapped into Program Memory 0xFFFF 0xFFFE 2009 Microchip Technology Inc. Preliminary DS70593B-page 45 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 4-5: DATA MEMORY MAP FOR dsPIC33FJXXXGPX06A/X08A/X10A DEVICES WITH 30 KBS RAM MSB Address MSB 2 Kbyte SFR Space 0x0001 SFR Space 0x07FF 0x0801 0x07FE 0x0800 8 Kbyte Near Data Space LSB Address LSB 0x0000 16 bits X Data RAM (X) 30 Kbyte SRAM Space 0x47FF 0x4801 Y Data RAM (Y) 0x77FF 0x7800 0x7FFF 0x8001 0x47FE 0x4800 DMA RAM 0x77FE 0x7800 0x7FFE 0x8000 Optionally Mapped into Program Memory X Data Unimplemented (X) 0xFFFF 0xFFFE DS70593B-page 46 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 4.2.5 X AND Y DATA SPACES 4.2.6 DMA RAM The core has two data spaces, X and Y. These data spaces can be considered either separate (for some DSP instructions), or as one unified linear address range (for MCU instructions). The data spaces are accessed using two Address Generation Units (AGUs) and separate data paths. This feature allows certain instructions to concurrently fetch two words from RAM, thereby enabling efficient execution of DSP algorithms such as Finite Impulse Response (FIR) filtering and Fast Fourier Transform (FFT). The X data space is used by all instructions and supports all addressing modes. There are separate read and write data buses for X data space. The X read data bus is the read data path for all instructions that view data space as combined X and Y address space. It is also the X data prefetch path for the dual operand DSP instructions (MAC class). The Y data space is used in concert with the X data space by the MAC class of instructions (CLR, ED, EDAC, MAC, MOVSAC, MPY, MPY.N and MSC) to provide two concurrent data read paths. Both the X and Y data spaces support Modulo Addressing mode for all instructions, subject to addressing mode restrictions. Bit-Reversed Addressing mode is only supported for writes to X data space. All data memory writes, including in DSP instructions, view data space as combined X and Y address space. The boundary between the X and Y data spaces is device-dependent and is not user-programmable. All effective addresses are 16 bits wide and point to bytes within the data space. Therefore, the data space address range is 64 Kbytes, or 32K words, though the implemented memory locations vary by device. Every dsPIC33FJXXXGPX06A/X08A/X10A device contains 2 Kbytes of dual ported DMA RAM located at the end of Y data space. Memory locations is part of Y data RAM and is in the DMA RAM space are accessible simultaneously by the CPU and the DMA controller module. DMA RAM is utilized by the DMA controller to store data to be transferred to various peripherals using DMA, as well as data transferred from various peripherals using DMA. The DMA RAM can be accessed by the DMA controller without having to steal cycles from the CPU. When the CPU and the DMA controller attempt to concurrently write to the same DMA RAM location, the hardware ensures that the CPU is given precedence in accessing the DMA RAM location. Therefore, the DMA RAM provides a reliable means of transferring DMA data without ever having to stall the CPU. Note: DMA RAM can be used for general purpose data storage if the DMA function is not required in an application. 2009 Microchip Technology Inc. Preliminary DS70593B-page 47 DS70593B-page 48 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-1: SFR Name WREG0 WREG1 WREG2 WREG3 WREG4 WREG5 WREG6 WREG7 WREG8 WREG9 WREG10 WREG11 WREG12 WREG13 WREG14 WREG15 SPLIM ACCAL ACCAH ACCAU ACCBL ACCBH ACCBU PCL PCH TBLPAG PSVPAG RCOUNT DCOUNT DOSTARTL DOSTARTH DOENDL DOENDH SR CORCON MODCON XMODSRT XMODEND YMODSRT YMODEND Legend: SFR Addr 0000 0002 0004 0006 0008 000A 000C 000E 0010 0012 0014 0016 0018 001A 001C 001E 0020 0022 0024 0026 0028 002A 002C 002E 0030 0032 0034 0036 0038 003A 003C 003E 0040 0042 0044 0046 0048 004A 004C CPU CORE REGISTERS MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0800 xxxx 0000 0000 0000 0000 0000 0000 0000 Program Counter High Byte Register Table Page Address Pointer Register Program Memory Visibility Page Address Pointer Register 0000 0000 0000 xxxx xxxx 0 -- -- IPL2 SATA -- -- IPL1 SATB IPL0 SATDW RA ACCSAT DOSTARTH<5:0> 0 DOENDH N IPL3 OV PSV Z RND C IF 0 1 0 1 xxxx 00xx xxxx 00xx 0000 0020 0000 xxxx xxxx xxxx xxxx Working Register 0 Working Register 1 Working Register 2 Working Register 3 Working Register 4 Working Register 5 Working Register 6 Working Register 7 Working Register 8 Working Register 9 Working Register 10 Working Register 11 Working Register 12 Working Register 13 Working Register 14 Working Register 15 Stack Pointer Limit Register Accumulator A Low Word Register Accumulator A High Word Register Accumulator A Upper Word Register Accumulator B Low Word Register Accumulator B High Word Register Accumulator B Upper Word Register Program Counter Low Word Register -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Preliminary 2009 Microchip Technology Inc. Repeat Loop Counter Register DCOUNT<15:0> DOSTARTL<15:1> -- -- OA -- XMODEN -- -- OB -- YMODEN -- -- SA -- -- -- -- SB US -- -- -- OAB EDT -- -- SAB -- -- DA DL<2:0> BWM<3:0> XS<15:1> XE<15:1> YS<15:1> -- DOENDL<15:1> -- DC YWM<3:0> XWM<3:0> 004E YE<15:1> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-1: SFR Name XBREV DISICNT BSRAM SSRAM Legend: SFR Addr 0050 0052 0750 0752 CPU CORE REGISTERS MAP (CONTINUED) Bit 15 BREN -- -- -- Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx xxxx -- -- -- -- IW_BSR IW_SSR IR_BSR IR_SSR RL_BSR RL_SSR 0000 0000 2009 Microchip Technology Inc. -- -- -- -- -- -- -- -- -- -- -- -- -- XB<14:0> Disable Interrupts Counter Register -- -- -- -- -- -- -- -- x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. dsPIC33FJXXXGPX06A/X08A/X10A Preliminary DS70593B-page 49 DS70593B-page 50 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-2: SFR Name CNEN1 CNEN2 CNPU1 CNPU2 Legend: SFR Addr 0060 0062 0068 006A CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJXXXGPX10A DEVICES Bit 15 CN15IE -- Bit 14 CN14IE -- Bit 13 CN13IE -- Bit 12 CN12IE -- Bit 11 CN11IE -- Bit 10 CN10IE -- Bit 9 CN9IE -- Bit 8 CN8IE -- CN8PUE -- Bit 7 CN7IE CN23IE CN7PUE Bit 6 CN6IE CN22IE CN6PUE Bit 5 CN5IE CN21IE CN5PUE Bit 4 CN4IE CN20IE CN4PUE Bit 3 CN3IE CN19IE CN3PUE Bit 2 CN2IE CN18IE CN2PUE Bit 1 CN1IE CN17IE CN1PUE Bit 0 CN0IE CN16IE CN0PUE All Resets 0000 0000 0000 0000 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE -- -- -- -- -- -- -- CN23PUE CN22PUE CN21PUE CN20PUE CN19PUE CN18PUE CN17PUE CN16PUE x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-3: SFR Name CNEN1 CNEN2 CNPU1 CNPU2 Legend: SFR Addr 0060 0062 0068 006A CHANGE NOTIFICATION REGISTER MAP FOR DSPIC33FJXXXGPX08A DEVICES Bit 15 CN15IE -- Bit 14 CN14IE -- Bit 13 CN13IE -- Bit 12 CN12IE -- Bit 11 CN11IE -- Bit 10 CN10IE -- Bit 9 CN9IE -- Bit 8 CN8IE -- CN8PUE -- Bit 7 CN7IE -- CN7PUE -- Bit 6 CN6IE -- CN6PUE -- Bit 5 CN5IE CN21IE CN5PUE Bit 4 CN4IE CN20IE CN4PUE Bit 3 CN3IE CN19IE CN3PUE Bit 2 CN2IE CN18IE CN2PUE Bit 1 CN1IE CN17IE CN1PUE Bit 0 CN0IE CN16IE CN0PUE All Resets 0000 0000 0000 0000 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE -- -- -- -- -- -- -- CN21PUE CN20PUE CN19PUE CN18PUE CN17PUE CN16PUE Preliminary 2009 Microchip Technology Inc. x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-4: SFR Name CNEN1 CNEN2 CNPU1 CNPU2 Legend: SFR Addr 0060 0062 0068 006A CHANGE NOTIFICATION REGISTER MAP FOR dsPIC33FJXXXGPX06A DEVICES Bit 15 CN15IE -- Bit 14 CN14IE -- Bit 13 CN13IE -- Bit 12 CN12IE -- Bit 11 CN11IE -- Bit 10 CN10IE -- Bit 9 CN9IE -- Bit 8 CN8IE -- CN8PUE -- Bit 7 CN7IE -- CN7PUE -- Bit 6 CN6IE -- CN6PUE -- Bit 5 CN5IE CN21IE CN5PUE Bit 4 CN4IE CN20IE CN4PUE Bit 3 CN3IE -- CN3PUE -- Bit 2 CN2IE CN18IE CN2PUE Bit 1 CN1IE CN17IE CN1PUE Bit 0 CN0IE CN16IE CN0PUE All Resets 0000 0000 0000 0000 CN15PUE CN14PUE CN13PUE CN12PUE CN11PUE CN10PUE CN9PUE -- -- -- -- -- -- -- CN21PUE CN20PUE CN18PUE CN17PUE CN16PUE x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. 2009 Microchip Technology Inc. TABLE 4-5: SFR Name INTCON1 INTCON2 IFS0 IFS1 IFS2 IFS3 IFS4 IEC0 IEC1 IEC2 IEC3 IEC4 IPC0 IPC1 IPC2 IPC3 IPC4 IPC5 IPC6 IPC7 IPC8 IPC9 IPC10 IPC11 IPC12 IPC13 IPC14 IPC15 IPC16 IPC17 INTTREG Legend: SFR Addr 0080 0082 0084 0086 0088 008A 008C 0094 0096 0098 009A 009C 00A4 00A6 00A8 00AA 00AC 00AE 00B0 00B2 00B4 00B6 00B8 00BA 00BC 00BE 00C0 00C2 00C4 00C6 00E0 INTERRUPT CONTROLLER REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 OVBTE -- Bit 8 COVTE -- T3IF DMA2IF IC6IF C2IF -- T3IE DMA2IE IC6IE C2IE -- Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 OSCFAIL INT1EP IC1IF MI2C1IF SPI2IF SI2C2IF U1EIF IC1IE Bit 0 -- INT0EP INT0IF SI2C1IF SPI2EIF T7IF -- INT0IE All Resets 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 4444 4444 4444 0444 4044 4444 4444 4444 4444 4444 4444 4404 4444 4444 4004 0044 -- 0440 4444 0000 NSTDIS OVAERR OVBERR COVAERR COVBERR OVATE ALTIVT -- U2TXIF T6IF -- -- -- U2TXIE T6IE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- DISI DMA1IF U2RXIF DMA4IF -- -- DMA1IE U2RXIE DMA4IE -- -- -- AD1IF INT2IF -- DMA5IF -- AD1IE INT2IE -- DMA5IE -- T1IP<2:0> T2IP<2:0> U1RXIP<2:0> -- CNIP<2:0> IC8IP<2:0> T4IP<2:0> U2TXIP<2:0> C1IP<2:0> IC5IP<2:0> OC7IP<2:0> T6IP<2:0> T8IP<2:0> C2RXIP<2:0> DCIEIP<2:0> -- -- C2TXIP<2:0> -- -- -- -- -- -- U1TXIF T5IF OC8IF DCIIF -- U1TXIE T5IE OC8IE DCIIE -- -- U1RXIF T4IF OC7IF DCIEIF -- U1RXIE T4IE OC7IE DCIEIE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SFTACERR DIV0ERR DMACERR MATHERR ADDRERR STKERR -- T2IF IC8IF IC5IF C2RXIF C2TXIF T2IE IC8IE IC5IE C2RXIE C2TXIE -- -- -- -- -- OC2IF IC7IF IC4IF INT4IF C1TXIF OC2IE IC7IE IC4IE INT4IE C1TXIE -- IC2IF AD2IF IC3IF INT3IF DMA7IF IC2IE AD2IE IC3IE INT3IE DMA7IE IC1IP<2:0> IC2IP<2:0> SPI1EIP<2:0> AD1IP<2:0> MI2C1IP<2:0> AD2IP<2:0> OC3IP<2:0> INT2IP<2:0> SPI2IP<2:0> IC3IP<2:0> OC5IP<2:0> -- -- SI2C2IP<2:0> INT3IP<2:0> -- -- DMA5IP<2:0> U1EIP<2:0> DMA7IP<2:0> -- -- INT4EP DMA0IF INT1IF DMA3IF T9IF DMA6IF DMA0IE INT1IE DMA3IE T9IE DMA6IE INT3EP T1IF CNIF C1IF T8IF -- T1IE CNIE C1IE T8IE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- VECNUM<6:0> -- INT2EP OC1IF -- C1RXIF MI2C2IF U2EIF OC1IE -- C1RXIE MI2C2IE U2EIE SPI1IF SPI1EIF OC4IF OC6IF -- -- OC3IF OC5IF -- -- dsPIC33FJXXXGPX06A/X08A/X10A SPI1IE SPI1EIE OC4IE OC6IE -- -- OC3IE OC5IE -- -- OC1IP<2:0> OC2IP<2:0> SPI1IP<2:0> DMA1IP<2:0> -- IC7IP<2:0> OC4IP<2:0> U2RXIP<2:0> C1RXIP<2:0> IC4IP<2:0> OC6IP<2:0> DMA4IP<2:0> MI2C2IP<2:0> INT4IP<2:0> -- -- U2EIP<2:0> C1TXIP<2:0> ILR<3:0> MI2C1IE SI2C1IE SPI2IE SI2C2IE U1EIE INT0IP<2:0> DMA0IP<2:0> T3IP<2:0> U1TXIP<2:0> SI2C1IP<2:0> INT1IP<2:0> DMA2IP<2:0> T5IP<2:0> SPI2EIP<2:0> DMA3IP<2:0> IC6IP<2:0> OC8IP<2:0> T7IP<2:0> T9IP<2:0> C2IP<2:0> DCIIP<2:0> -- DMA6IP<2:0> SPI2EIE T7IE -- Preliminary DS70593B-page 51 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-6: SFR Name TMR1 PR1 T1CON TMR2 SFR Addr 0100 0102 0104 0106 TIMER REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx FFFF TGATE TCKPS<1:0> -- TSYNC TCS -- 0000 xxxx xxxx xxxx FFFF FFFF TGATE TGATE TCKPS<1:0> TCKPS<1:0> T32 -- -- -- TCS TCS -- -- 0000 0000 xxxx xxxx xxxx FFFF FFFF TGATE TGATE TCKPS<1:0> TCKPS<1:0> T32 -- -- -- TCS TCS -- -- 0000 0000 xxxx xxxx xxxx FFFF FFFF TGATE TGATE TCKPS<1:0> TCKPS<1:0> T32 -- -- -- TCS TCS -- -- 0000 0000 xxxx xxxx xxxx FFFF FFFF TGATE TGATE TCKPS<1:0> TCKPS<1:0> T32 -- -- -- TCS TCS -- -- 0000 0000 DS70593B-page 52 dsPIC33FJXXXGPX06A/X08A/X10A Timer1 Register Period Register 1 TON -- TSIDL -- -- -- -- -- -- Timer2 Register Timer3 Holding Register (for 32-bit timer operations only) Timer3 Register Period Register 2 Period Register 3 TON TON -- -- TSIDL TSIDL -- -- -- -- -- -- -- -- -- -- -- -- TMR3HLD 0108 TMR3 PR2 PR3 T2CON T3CON TMR4 TMR5HLD TMR5 PR4 010A 010C 010E 0110 0112 0114 0116 0118 011A 011C 011E 0120 0122 TON TON -- -- TSIDL TSIDL -- -- -- -- -- -- Timer4 Register Timer5 Holding Register (for 32-bit operations only) Timer5 Register Period Register 4 Period Register 5 -- -- -- -- -- -- Preliminary 2009 Microchip Technology Inc. PR5 T4CON T5CON TMR6 Timer6 Register Timer7 Holding Register (for 32-bit operations only) Timer7 Register Period Register 6 Period Register 7 TON TON -- -- TSIDL TSIDL -- -- -- -- -- -- -- -- -- -- -- -- TMR7HLD 0124 TMR7 PR6 PR7 T6CON T7CON TMR8 0126 0128 012A 012C 012E 0130 Timer8 Register Timer9 Holding Register (for 32-bit operations only) Timer9 Register Period Register 8 Period Register 9 TON TON -- -- TSIDL TSIDL -- -- -- -- -- -- -- -- -- -- -- -- TMR9HLD 0132 TMR9 PR8 PR9 T8CON T9CON Legend: 0134 0136 0138 013A 013C x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. 2009 Microchip Technology Inc. TABLE 4-7: SFR Name IC1BUF IC1CON IC2BUF IC2CON IC3BUF IC3CON IC4BUF IC4CON IC5BUF IC5CON IC6BUF IC6CON IC7BUF IC7CON IC8BUF IC8CON Legend: SFR Addr 0140 0142 0144 0146 0148 014A 014C 014E 0150 0152 0154 0156 0158 015A 015C 015E INPUT CAPTURE REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 xxxx ICI<1:0> ICOV ICBNE ICM<2:0> 0000 Input 1 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Input 2 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Input 3 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR dsPIC33FJXXXGPX06A/X08A/X10A Input 4 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Input 5 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Input 6 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Input 7 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR Preliminary DS70593B-page 53 Input 8 Capture Register -- -- ICSIDL -- -- -- -- -- ICTMR x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. DS70593B-page 54 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-8: SFR Name OC1RS OC1R OC1CON OC2RS OC2R OC2CON OC3RS OC3R OC3CON OC4RS OC4R OC4CON OC5RS OC5R OC5CON OC6RS OC6R OC6CON OC7RS OC7R OC7CON OC8RS OC8R OC8CON Legend: SFR Addr 0180 0182 0184 0186 0188 018A 018C 018E 0190 0192 0194 0196 0198 019A 019C 019E 01A0 01A2 01A4 01A6 01A8 01AA 01AC 01AE OUTPUT COMPARE REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 xxxx xxxx -- OCFLT OCTSEL OCM<2:0> 0000 Output Compare 1 Secondary Register Output Compare 1 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 2 Secondary Register Output Compare 2 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 3 Secondary Register Output Compare 3 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 4 Secondary Register Output Compare 4 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 5 Secondary Register Output Compare 5 Register -- -- OCSIDL -- -- -- -- -- -- -- Preliminary 2009 Microchip Technology Inc. Output Compare 6 Secondary Register Output Compare 6 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 7 Secondary Register Output Compare 7 Register -- -- OCSIDL -- -- -- -- -- -- -- Output Compare 8 Secondary Register Output Compare 8 Register -- -- OCSIDL -- -- -- -- -- -- -- x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-9: SFR Name I2C1RCV I2C1TRN I2C1BRG I2C1CON I2C1STAT I2C1ADD I2C1MSK Legend: SFR Addr 0200 0202 0204 0206 0208 020A 020C I2C1 REGISTER MAP Bit 15 -- -- -- I2CEN ACKSTAT -- -- Bit 14 -- -- -- -- TRSTAT -- -- Bit 13 -- -- -- I2CSIDL -- -- -- Bit 12 -- -- -- SCLREL -- -- -- Bit 11 -- -- -- IPMIEN -- -- -- Bit 10 -- -- -- A10M BCL -- -- Bit 9 -- -- -- DISSLW GCSTAT SMEN ADD10 GCEN IWCOL STREN I2COV Bit 8 -- -- Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets 0000 00FF 0000 PEN R_W RSEN RBF SEN TBF 1000 0000 0000 2009 Microchip Technology Inc. Receive Register Transmit Register Baud Rate Generator Register ACKDT D_A ACKEN P RCEN S Address Register Address Mask Register dsPIC33FJXXXGPX06A/X08A/X10A 0000 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-10: SFR Name I2C2RCV I2C2TRN SFR Addr 0210 0212 0214 0216 0218 021A 021C I2C2 REGISTER MAP Bit 15 -- -- -- I2CEN ACKSTAT -- -- Bit 14 -- -- -- -- TRSTAT -- -- Bit 13 -- -- -- I2CSIDL -- -- -- Bit 12 -- -- -- SCLREL -- -- -- Bit 11 -- -- -- IPMIEN -- -- -- Bit 10 -- -- -- A10M BCL -- -- Bit 9 -- -- -- DISSLW GCSTAT SMEN ADD10 GCEN IWCOL STREN I2COV Bit 8 -- -- Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets 0000 00FF 0000 PEN R_W RSEN RBF SEN TBF 1000 0000 0000 0000 Receive Register Transmit Register Baud Rate Generator Register ACKDT D_A ACKEN P RCEN S Preliminary DS70593B-page 55 I2C2BRG I2C2CON I2C2STAT I2C2ADD I2C2MSK Legend: Address Register Address Mask Register x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. DS70593B-page 56 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-11: SFR Name U1MODE U1STA U1TXREG U1RXREG U1BRG Legend: SFR Addr 0220 0222 0224 0226 0228 UART1 REGISTER MAP Bit 15 UARTEN UTXISEL1 -- -- Bit 14 -- Bit 13 USIDL Bit 12 IREN -- -- -- Bit 11 RTSMD UTXBRK -- -- Bit 10 -- UTXEN -- -- Bit 9 UEN1 UTXBF -- -- Baud Rate Generator Prescaler Bit 8 UEN0 TRMT Bit 7 WAKE Bit 6 LPBACK Bit 5 ABAUD ADDEN Bit 4 URXINV RIDLE Bit 3 BRGH PERR Bit 2 Bit 1 Bit 0 STSEL URXDA All Resets 0000 0110 xxxx 0000 0000 PDSEL<1:0> FERR OERR UTXINV UTXISEL0 -- -- -- -- URXISEL<1:0> UART Transmit Register UART Receive Register x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-12: SFR Name U2MODE U2STA U2TXREG U2RXREG U2BRG Legend: SFR Addr 0230 0232 0234 0236 0238 UART2 REGISTER MAP Bit 15 UARTEN UTXISEL1 -- -- Bit 14 -- UTXINV -- -- Bit 13 USIDL UTXISEL0 -- -- Bit 12 IREN -- -- -- Bit 11 RTSMD UTXBRK -- -- Bit 10 -- UTXEN -- -- Bit 9 UEN1 UTXBF -- -- Baud Rate Generator Prescaler Bit 8 UEN0 TRMT Bit 7 WAKE Bit 6 LPBACK Bit 5 ABAUD ADDEN Bit 4 URXINV RIDLE Bit 3 BRGH PERR Bit 2 Bit 1 Bit 0 STSEL URXDA All Resets 0000 0110 xxxx 0000 0000 PDSEL<1:0> FERR OERR URXISEL<1:0> UART Transmit Register UART Receive Register Preliminary 2009 Microchip Technology Inc. x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-13: SFR Name SPI1STAT SPI1CON1 SPI1CON2 SPI1BUF Legend: SFR Addr 0240 0242 0244 0248 SPI1 REGISTER MAP Bit 15 SPIEN -- FRMEN Bit 14 -- -- SPIFSD Bit 13 SPISIDL -- FRMPOL Bit 12 -- DISSCK -- Bit 11 -- DISSDO -- Bit 10 -- MODE16 -- Bit 9 -- SMP -- Bit 8 -- CKE -- Bit 7 -- SSEN -- Bit 6 SPIROV CKP -- Bit 5 -- MSTEN -- -- Bit 4 -- Bit 3 -- SPRE<2:0> -- -- Bit 2 -- Bit 1 SPITBF Bit 0 SPIRBF All Resets 0000 0000 0000 0000 PPRE<1:0> FRMDLY -- SPI1 Transmit and Receive Buffer Register x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-14: SFR Name SPI2STAT SPI2CON1 SPI2CON2 SPI2BUF Legend: SFR Addr 0260 0262 0264 0268 SPI2 REGISTER MAP Bit 15 SPIEN -- FRMEN Bit 14 -- -- SPIFSD Bit 13 SPISIDL -- FRMPOL Bit 12 -- DISSCK -- Bit 11 -- DISSDO -- Bit 10 -- MODE16 -- Bit 9 -- SMP -- Bit 8 -- CKE -- Bit 7 -- SSEN -- Bit 6 SPIROV CKP -- Bit 5 -- MSTEN -- -- Bit 4 -- Bit 3 -- SPRE<2:0> -- -- Bit 2 -- Bit 1 SPITBF Bit 0 SPIRBF All Resets 0000 0000 0000 0000 PPRE<1:0> FRMDLY -- SPI2 Transmit and Receive Buffer Register x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-15: File Name ADC1BUF0 AD1CON1 AD1CON2 AD1CON3 AD1CHS123 AD1CHS0 Addr 0300 0320 0322 0324 0326 0328 ADC1 REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx SSRC<2:0> BUFS -- -- SIMSAM ASAM SAMP BUFM DONE ALTS 0000 0000 0000 CH123NA<1:0> CH0SA<4:0> PCFG16 PCFG0 CSS16 CSS0 CH123SA 0000 0000 0000 0000 0000 0000 0000 2009 Microchip Technology Inc. ADC Data Buffer 0 ADON -- VCFG<2:0> ADRC -- CH0NB -- -- -- -- -- -- PCFG29 PCFG13 CSS29 CSS13 -- PCFG28 PCFG12 CSS28 CSS12 -- -- -- ADSIDL ADDMABM -- -- -- AD12B CSCNA SAMC<4:0> CH123NB<1:0> CH0SB<4:0> PCFG27 PCFG26 PCFG25 PCFG11 PCFG10 CSS27 CSS11 -- CSS26 CSS10 -- PCFG9 CSS25 CSS9 -- PCFG24 PCFG8 CSS24 CSS8 -- CH123SB -- CH0NA PCFG23 PCFG7 CSS23 CSS7 -- -- -- PCFG22 PCFG6 CSS22 CSS6 -- -- -- FORM<1:0> CHPS<1:0> SMPI<3:0> ADCS<7:0> -- -- dsPIC33FJXXXGPX06A/X08A/X10A AD1PCFGH(1) 032A PCFG31 PCFG30 AD1PCFGL AD1CSSH(1) AD1CSSL AD1CON4 Legend: Note 1: 032C PCFG15 PCFG14 032E 0330 0332 CSS31 CSS15 -- CSS30 CSS14 -- PCFG21 PCFG20 PCFG19 PCFG18 PCFG17 PCFG5 CSS21 CSS5 -- PCFG4 CSS20 CSS4 -- PCFG3 CSS19 CSS3 -- PCFG2 CSS18 CSS2 PCFG1 CSS17 CSS1 DMABL<2:0> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. Not all ANx inputs are available on all devices. See the device pin diagrams for available ANx inputs. TABLE 4-16: File Name ADC2BUF0 AD2CON1 AD2CON2 AD2CON3 AD2CHS123 AD2CHS0 Reserved AD2PCFGL Reserved AD2CSSL AD2CON4 Legend: Addr 0340 0360 0362 0364 0366 0368 036A 036C 036E 0370 0372 ADC2 REGISTER MAP Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx SSRC<2:0> BUFS -- -- SIMSAM ASAM SAMP BUFM DONE ALTS 0000 0000 0000 CH123NA<1:0> CH0SA<3:0> -- PCFG3 -- CSS3 -- -- PCFG2 -- CSS2 -- PCFG1 -- CSS1 DMABL<2:0> -- PCFG0 -- CSS0 CH123SA 0000 0000 0000 0000 0000 0000 0000 Preliminary DS70593B-page 57 ADC Data Buffer 0 ADON -- VCFG<2:0> ADRC -- CH0NB -- -- -- -- -- -- -- -- -- PCFG13 -- CSS13 -- -- -- -- PCFG12 -- CSS12 -- -- -- ADSIDL ADDMABM -- -- -- AD12B CSCNA SAMC<4:0> CH123NB<1:0> CH0SB<3:0> -- -- PCFG9 -- CSS9 -- -- PCFG8 -- CSS8 -- CH123SB -- CH0NA -- PCFG7 -- CSS7 -- -- -- -- PCFG6 -- CSS6 -- -- -- -- PCFG5 -- CSS5 -- FORM<1:0> CHPS<1:0> SMPI<3:0> ADCS<7:0> -- -- -- PCFG4 -- CSS4 -- -- PCFG15 PCFG14 -- CSS15 -- -- CSS14 -- PCFG11 PCFG10 -- CSS11 -- -- CSS10 -- x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-17: File Name Addr DMA0CON 0380 DMA0REQ 0382 DMA0STA DMA0STB DMA0PAD DMA0CNT 0384 0386 0388 038A DMA REGISTER MAP Bit 15 CHEN FORCE Bit 14 SIZE -- Bit 13 DIR -- Bit 12 HALF -- Bit 11 NULLW -- Bit 10 -- -- Bit 9 -- -- Bit 8 -- -- Bit 7 -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> Bit 6 -- Bit 5 Bit 4 Bit 3 -- IRQSEL<6:0> Bit 2 -- Bit 1 Bit 0 All Resets 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 DS70593B-page 58 dsPIC33FJXXXGPX06A/X08A/X10A AMODE<1:0> MODE<1:0> DMA1CON 038C DMA1REQ 038E DMA1STA DMA1STB DMA1PAD DMA1CNT 0390 0392 0394 0396 DMA2CON 0398 DMA2REQ 039A Preliminary 2009 Microchip Technology Inc. DMA2STA DMA2STB DMA2PAD DMA2CNT 039C 039E 03A0 03A2 DMA3CON 03A4 DMA3REQ 03A6 DMA3STA DMA3STB 03A8 03AA DMA3PAD 03AC DMA3CNT 03AE DMA4CON 03B0 DMA4REQ 03B2 DMA4STA DMA4STB DMA4PAD 03B4 03B6 03B8 DMA4CNT 03BA DMA5CON 03BC DMA5REQ 03BE DMA5STA DMA5STB DMA5PAD Legend: 03C0 03C2 03C4 -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. 2009 Microchip Technology Inc. TABLE 4-17: File Name Addr DMA5CNT 03C6 DMA6CON 03C8 DMA REGISTER MAP (CONTINUED) Bit 15 -- CHEN Bit 14 -- SIZE -- Bit 13 -- DIR -- Bit 12 -- HALF -- Bit 11 -- NULLW -- Bit 10 -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- CHEN FORCE -- SIZE -- -- DIR -- -- HALF -- -- NULLW -- -- -- -- -- -- -- -- -- -- STA<15:0> STB<15:0> PAD<15:0> -- -- -- -- -- -- XWCOL7 PPST7 DSADR<15:0> CNT<9:0> XWCOL6 XWCOL5 PPST6 PPST5 XWCOL4 PPST4 XWCOL3 PPST3 XWCOL2 PPST2 XWCOL1 XWCOL0 PPST1 PPST0 -- CNT<9:0> AMODE<1:0> -- IRQSEL<6:0> -- MODE<1:0> -- Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets 0000 -- IRQSEL<6:0> -- MODE<1:0> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 CNT<9:0> AMODE<1:0> DMA6REQ 03CA FORCE DMA6STA DMA6STB DMA6PAD 03CC 03CE 03D0 dsPIC33FJXXXGPX06A/X08A/X10A DMA6CNT 03D2 DMA7CON 03D4 DMA7REQ 03D6 DMA7STA DMA7STB 03D8 03DA DMA7PAD 03DC DMA7CNT 03DE DMACS0 DMACS1 DSADR Legend: 03E0 PWCOL7 PWCOL6 PWCOL5 PWCOL4 PWCOL3 PWCOL2 PWCOL1 PWCOL0 03E2 03E4 -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. -- -- -- -- LSTCH<3:0> Preliminary DS70593B-page 59 DS70593B-page 60 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-18: File Name C1CTRL1 C1CTRL2 C1VEC C1FCTRL C1FIFO C1INTF C1INTE C1EC C1CFG1 C1CFG2 C1FEN1 C1FMSKSEL1 C1FMSKSEL2 ECAN1 REGISTER MAP WHEN C1CTRL1.WIN = 0 OR 1 FOR dsPIC33FJXXXGP506A/51A0/706A/708A/710A DEVICES ONLY Bit 15 -- -- -- Bit 14 -- -- -- DMABS<2:0> -- -- -- -- -- -- TXBO -- TXBP -- Bit 13 CSIDL -- -- -- -- FBP<5:0> RXBP -- TXWAR -- RXWAR -- EWARN -- Bit 12 ABAT -- Bit 11 -- -- -- FILHIT<4:0> -- -- -- Bit 10 Bit 9 REQOP<2:0> -- -- -- -- -- -- IVRIF IVRIE -- -- WAKIF WAKIE ERRIF ERRIE -- -- -- Bit 8 Bit 7 Bit 6 OPMODE<2:0> -- -- Bit 5 Bit 4 -- Bit 3 CANCAP Bit 2 -- Bit 1 -- Bit 0 WIN All Resets 0480 0000 0000 0000 0000 RBIF RBIE TBIF TBIE 0000 0000 0000 0000 PRSEG<2:0> FLTEN2 FLTEN1 FLTEN0 F0MSK<1:0> F8MSK<1:0> 0000 FFFF 0000 0000 Addr 0400 0402 0404 0406 0408 040A 040C 040E 0410 0412 0414 0418 041A DNCNT<4:0> ICODE<6:0> FSA<4:0> FNRB<5:0> FIFOIF FIFOIE RBOVIF RBOVIE TERRCNT<7:0> -- -- FLTEN15 -- WAKFIL FLTEN14 -- -- FLTEN13 -- -- FLTEN12 -- -- FLTEN11 -- -- SEG2PH<2:0> FLTEN10 FLTEN9 FLTEN8 -- SJW<1:0> SEG2PHTS FLTEN7 SAM FLTEN6 RERRCNT<7:0> BRP<5:0> SEG1PH<2:0> FLTEN5 FLTEN4 FLTEN3 F7MSK<1:0> F15MSK<1:0> F6MSK<1:0> F14MSK<1:0> F5MSK<1:0> F13MSK<1:0> F4MSK<1:0> F12MSK<1:0> F3MSK<1:0> F11MSK<1:0> F2MSK<1:0> F10MSK<1:0> F1MSK<1:0> F9MSK<1:0> Preliminary 2009 Microchip Technology Inc. Legend: -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-19: File Name Addr 0400041E C1RXFUL1 C1RXFUL2 C1RXOVF1 C1RXOVF2 ECAN1 REGISTER MAP WHEN C1CTRL1.WIN = 0 FOR dsPIC33FJXXXGP506A/510A/706A/708A/710A DEVICES ONLY Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets See definition when WIN = x RXFUL8 RXFUL7 RXFUL6 RXFUL5 RXFUL4 RXFUL3 RXFUL2 RXFUL1 RXFUL0 0000 0000 0000 0000 0000 0000 0000 xxxx xxxx xxxx 0420 RXFUL15 RXFUL14 RXFUL13 RXFUL12 RXFUL11 RXFUL10 RXFUL9 0422 RXFUL31 RXFUL30 RXFUL29 RXFUL28 RXFUL27 RXFUL26 RXFUL25 RXFUL24 RXFUL23 RXFUL22 RXFUL21 RXFUL20 RXFUL19 RXFUL18 RXFUL17 RXFUL16 0428 RXOVF15 RXOVF14 RXOVF13 RXOVF12 RXOVF11 RXOVF10 RXOVF9 RXOVF8 RXOVF7 RXOVF6 RXOVF5 RXOVF4 RXOVF3 RXOVF2 RXOVF1 RXOVF0 042A RXOVF31 RXOVF30 RXOVF29 RXOVF28 RXOVF27 RXOVF26 RXOVF25 RXOVF24 RXOVF23 RXOVF22 RXOVF21 RXOVF20 RXOVF19 RXOVF18 RXOVF17 RXOVF16 TXEN1 TXEN3 TXEN5 TXEN7 TXABT1 TXABT3 TXABT5 TXABT7 TXLARB1 TXLARB3 TXLARB5 TXLARB7 TXERR1 TXERR3 TXERR5 TXERR7 TXREQ1 TXREQ3 TXREQ5 TXREQ7 RTREN1 RTREN3 RTREN5 RTREN7 TX1PRI<1:0> TX3PRI<1:0> TX5PRI<1:0> TX7PRI<1:0> TXEN0 TXEN2 TXEN4 TXEN6 TXABAT0 TXLARB0 TXABAT2 TXLARB2 TXABAT4 TXLARB4 TXABAT6 TXLARB6 TXERR0 TXERR2 TXERR4 TXERR6 TXREQ0 TXREQ2 TXREQ4 TXREQ6 RTREN0 RTREN2 RTREN4 RTREN6 TX0PRI<1:0> TX2PRI<1:0> TX4PRI<1:0> TX6PRI<1:0> C1TR01CON 0430 C1TR23CON 0432 C1TR45CON 0434 C1TR67CON 0436 C1RXD C1TXD Legend: 0440 0442 Received Data Word Transmit Data Word x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. 2009 Microchip Technology Inc. TABLE 4-20: File Name ECAN1 REGISTER MAP WHEN C1CTRL1.WIN = 1 FOR dsPIC33FJXXXGP506A/510A/706A/708A/710A DEVICES ONLY Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets Addr 0400041E See definition when WIN = x F3BP<3:0> F7BP<3:0> F11BP<3:0> F15BP<3:0> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> F2BP<3:0> F6BP<3:0> F10BP<3:0> F14BP<3:0> F1BP<3:0> F5BP<3:0> F9BP<3:0> F13BP<3:0> SID<2:0> -- MIDE F0BP<3:0> F4BP<3:0> F8BP<3:0> F12BP<3:0> -- EID<17:16> 0000 0000 0000 0000 xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx C1BUFPNT1 C1BUFPNT2 C1BUFPNT3 C1BUFPNT4 C1RXM0SID C1RXM0EID C1RXM1SID C1RXM1EID C1RXM2SID C1RXM2EID C1RXF0SID C1RXF0EID C1RXF1SID C1RXF1EID C1RXF2SID C1RXF2EID C1RXF3SID C1RXF3EID C1RXF4SID C1RXF4EID C1RXF5SID C1RXF5EID C1RXF6SID C1RXF6EID C1RXF7SID C1RXF7EID C1RXF8SID C1RXF8EID 0420 0422 0424 0426 0430 0432 0434 0436 0438 043A 0440 0442 0444 0446 0448 044A 044C 044E 0450 0452 0454 0456 0458 045A 045C 045E 0460 0462 0464 0466 0468 046A dsPIC33FJXXXGPX06A/X08A/X10A EID<7:0> -- MIDE EID<7:0> -- MIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE Preliminary DS70593B-page 61 EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE C1RXF9SID C1RXF9EID C1RXF10SID C1RXF10EID Legend: EID<7:0> -- EXIDE EID<7:0> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-20: File Name C1RXF11SID C1RXF11EID C1RXF12SID C1RXF12EID C1RXF13SID C1RXF13EID C1RXF14SID C1RXF14EID C1RXF15SID C1RXF15EID Legend: ECAN1 REGISTER MAP WHEN C1CTRL1.WIN = 1 FOR dsPIC33FJXXXGP506A/510A/706A/708A/710A DEVICES ONLY Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 SID<2:0> Bit 5 Bit 4 -- Bit 3 EXIDE Bit 2 -- Bit 1 Bit 0 All Resets xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx DS70593B-page 62 dsPIC33FJXXXGPX06A/X08A/X10A Addr 046C 046E 0470 0472 0474 0476 0478 047A 047C 047E SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> EID<17:16> EID<7:0> SID<2:0> -- EXIDE EID<7:0> SID<2:0> -- EXIDE EID<7:0> SID<2:0> -- EXIDE EID<7:0> SID<2:0> -- EXIDE EID<7:0> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. Preliminary 2009 Microchip Technology Inc. 2009 Microchip Technology Inc. TABLE 4-21: File Name C2CTRL1 C2CTRL2 C2VEC C2FCTRL C2FIFO C2INTF C2INTE C2EC C2CFG1 C2CFG2 C2FEN1 C2FMSKSEL1 C2FMSKSEL2 Legend: Addr 0500 0502 0504 0506 0508 050A 050C 050E 0510 0512 0514 0518 051A ECAN2 REGISTER MAP WHEN C2CTRL1.WIN = 0 OR 1 FOR dsPIC33FJXXXGP706A/708A/710A DEVICES ONLY Bit 15 -- -- -- Bit 14 -- -- -- DMABS<2:0> -- -- -- -- -- -- TXBO -- TXBP -- Bit 13 CSIDL -- -- -- -- FBP<5:0> RXBP -- TXWAR -- RXWAR EWARN -- -- Bit 12 ABAT -- Bit 11 -- -- -- FILHIT<4:0> -- -- -- Bit 10 Bit 9 REQOP<2:0> -- -- -- -- -- -- IVRIF IVRIE -- -- WAKIF WAKIE ERRIF ERRIE -- -- -- Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 -- -- Bit 3 CANCAP Bit 2 -- Bit 1 -- Bit 0 WIN All Resets 0480 0000 0000 0000 0000 OPMODE<2:0> -- DNCNT<4:0> ICODE<6:0> FSA<4:0> FNRB<5:0> FIFOIF FIFOIE RBOVIF RBOVIE RBIF RBIE TBIF TBIE dsPIC33FJXXXGPX06A/X08A/X10A 0000 0000 0000 0000 TERRCNT<7:0> -- -- FLTEN15 -- WAKFIL FLTEN14 -- -- FLTEN13 -- -- FLTEN12 -- -- FLTEN11 -- -- SEG2PH<2:0> FLTEN10 FLTEN9 FLTEN8 F4MSK<1:0> F12MSK<1:0> -- SJW<1:0> SEG2PHTS FLTEN7 SAM RERRCNT<7:0> BRP<5:0> SEG1PH<2:0> PRSEG<2:0> FLTEN2 FLTEN1 FLTEN0 0000 FFFF 0000 0000 FLTEN6 FLTEN5 FLTEN4 FLTEN3 F2MSK<1:0> F10MSK<1:0> F7MSK<1:0> F15MSK<1:0> F6MSK<1:0> F14MSK<1:0> F5MSK<1:0> F13MSK<1:0> F3MSK<1:0> F11MSK<1:0> F1MSK<1:0> F9MSK<1:0> F0MSK<1:0> F8MSK<1:0> -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. Preliminary DS70593B-page 63 TABLE 4-22: File Name Addr 0500051E C2RXFUL1 C2RXFUL2 C2RXOVF1 C2RXOVF2 ECAN2 REGISTER MAP WHEN C2CTRL1.WIN = 0 FOR dsPIC33FJXXXGP706A/708A/710A DEVICES ONLY Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets See definition when WIN = x RXFUL9 RXFUL8 RXFUL7 RXFUL6 RXFUL5 RXFUL4 RXFUL3 RXFUL2 RXFUL1 RXFUL0 0000 0000 0000 0520 RXFUL15 RXFUL14 RXFUL13 RXFUL12 RXFUL11 RXFUL10 0522 RXFUL31 RXFUL30 RXFUL29 RXFUL28 RXFUL27 RXFUL26 RXFUL25 RXFUL24 RXFUL23 RXFUL22 RXFUL21 RXFUL20 RXFUL19 RXFUL18 RXFUL17 RXFUL16 0528 RXOVF15 RXOVF14 RXOVF13 RXOVF12 RXOVF11 RXOVF10 RXOVF09 RXOVF08 RXOVF7 RXOVF6 RXOVF5 RXOVF4 RXOVF3 RXOVF2 RXOVF1 RXOVF0 052A RXOVF31 RXOVF30 RXOVF29 RXOVF28 RXOVF27 RXOVF26 RXOVF25 RXOVF24 RXOVF23 RXOVF22 RXOVF21 RXOVF20 RXOVF19 RXOVF18 RXOVF17 RXOVF16 0000 TXEN1 TXEN3 TXEN5 TXEN7 TX ABAT1 TX ABAT3 TX ABAT5 TX ABAT7 TX LARB1 TX LARB3 TX LARB5 TX LARB7 TX ERR1 TX ERR3 TX ERR5 TX ERR7 TX REQ1 TX REQ3 TX REQ5 TX REQ7 RTREN1 RTREN3 RTREN5 RTREN7 TX1PRI<1:0> TX3PRI<1:0> TX5PRI<1:0> TX7PRI<1:0> TXEN0 TXEN2 TXEN4 TXEN6 TX ABAT0 TX ABAT2 TX ABAT4 TX ABAT6 TX LARB0 TX LARB2 TX LARB4 TX LARB6 TX ERR0 TX ERR2 TX ERR4 TX ERR6 TX REQ0 TX REQ2 TX REQ4 TX REQ6 RTREN0 RTREN2 RTREN4 RTREN6 TX0PRI<1:0> TX2PRI<1:0> TX4PRI<1:0> TX6PRI<1:0> 0000 0000 0000 xxxx xxxx xxxx C2TR01CON 0530 C2TR23CON 0532 C2TR45CON 0534 C2TR67CON 0536 C2RXD C2TXD Legend: 0540 0542 Recieved Data Word Transmit Data Word x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. TABLE 4-23: File Name Addr 0500 051E C2BUFPNT1 C2BUFPNT2 C2BUFPNT3 C2BUFPNT4 C2RXM0SID C2RXM0EID C2RXM1SID C2RXM1EID C2RXM2SID C2RXM2EID C2RXF0SID C2RXF0EID C2RXF1SID C2RXF1EID C2RXF2SID C2RXF2EID C2RXF3SID C2RXF3EID C2RXF4SID C2RXF4EID C2RXF5SID C2RXF5EID C2RXF6SID C2RXF6EID C2RXF7SID C2RXF7EID C2RXF8SID C2RXF8EID C2RXF9SID C2RXF9EID C2RXF10SID Legend: 0520 0522 0524 0526 0530 0532 0534 0536 0538 053A 0540 0542 0544 0546 0548 054A 054C 054E 0550 0552 0554 0556 0558 055A 055C 055E 0560 0562 0564 0566 0568 ECAN2 REGISTER MAP WHEN C2CTRL1.WIN = 1 FOR dsPIC33FJXXXGP706A/708A/710A DEVICES ONLY Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets DS70593B-page 64 dsPIC33FJXXXGPX06A/X08A/X10A See definition when WIN = x F3BP<3:0> F7BP<3:0> F11BP<3:0> F15BP<3:0> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> F2BP<3:0> F6BP<3:0> F10BP<3:0> F14BP<3:0> F1BP<3:0> F5BP<3:0> F9BP<3:0> F13BP<3:0> SID<2:0> -- MIDE F0BP<3:0> F4BP<3:0> F8BP<3:0> F12BP<3:0> -- EID<17:16> 0000 0000 0000 0000 xxxx xxxx EID<7:0> SID<2:0> -- MIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- MIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> Preliminary 2009 Microchip Technology Inc. xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx xxxx EID<7:0> SID<2:0> -- EXIDE -- EID<17:16> xxxx x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. 2009 Microchip Technology Inc. TABLE 4-23: File Name C2RXF10EID C2RXF11SID C2RXF11EID C2RXF12SID C2RXF12EID C2RXF13SID C2RXF13EID C2RXF14SID C2RXF14EID C2RXF15SID C2RXF15EID Legend: Addr 056A 056C 056E 0570 0572 0574 0576 0578 057A 057C 057E ECAN2 REGISTER MAP WHEN C2CTRL1.WIN = 1 FOR dsPIC33FJXXXGP706A/708A/710A DEVICES ONLY (CONTINUED) Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 All Resets xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx -- EID<17:16> xxxx xxxx EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<10:3> EID<15:8> SID<2:0> SID<2:0> SID<2:0> SID<2:0> SID<2:0> EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> -- EXIDE dsPIC33FJXXXGPX06A/X08A/X10A EID<7:0> -- EXIDE EID<7:0> -- EXIDE EID<7:0> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. Preliminary DS70593B-page 65 DS70593B-page 66 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-24: SFR Name DCICON1 DCICON2 DCICON3 DCISTAT TSCON RSCON RXBUF0 RXBUF1 RXBUF2 RXBUF3 TXBUF0 TXBUF1 TXBUF2 TXBUF3 Legend: Note 1: Addr. 0280 0282 0284 0286 0288 028C 0290 0292 0294 0296 0298 029A 029C 029E DCI REGISTER MAP Bit 15 DCIEN -- -- -- TSE15 RSE15 Bit 14 -- -- -- -- TSE14 RSE14 Bit 13 DCISIDL -- -- -- TSE13 RSE13 Bit 12 -- -- -- -- TSE12 RSE12 SLOT3 TSE11 RSE11 SLOT2 TSE10 RSE10 SLOT1 TSE9 RSE9 SLOT0 TSE8 RSE8 -- TSE7 RSE7 Bit 11 DLOOP BLEN1 Bit 10 CSCKD BLEN0 Bit 9 CSCKE -- Bit 8 COFSD Bit 7 UNFM Bit 6 CSDOM Bit 5 DJST Bit 4 -- -- Bit 3 -- Bit 2 -- Bit 1 COFSM1 WS<3:0> Bit 0 COFSM0 Reset State 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 -- TSE4 RSE4 ROV TSE3 RSE3 RFUL TSE2 RSE2 TUNF TSE1 RSE1 TMPTY TSE0 RSE0 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 COFSG<3:0> BCG<11:0> -- TSE6 RSE6 -- TSE5 RSE5 Receive Buffer #0 Data Register Receive Buffer #1 Data Register Receive Buffer #2 Data Register Receive Buffer #3 Data Register Transmit Buffer #0 Data Register Transmit Buffer #1 Data Register Transmit Buffer #2 Data Register Transmit Buffer #3 Data Register Preliminary 2009 Microchip Technology Inc. -- = unimplemented, read as `0'. Refer to the "dsPIC33F/PIC24H Family Reference Manual" for descriptions of register bit fields. TABLE 4-25: File Name TRISA PORTA LATA ODCA(2) Legend: Note 1: Addr 02C0 02C2 02C4 06C0 PORTA REGISTER MAP(1) Bit 15 TRISA15 RA15 LATA15 ODCA15 Bit 14 TRISA14 RA14 LATA14 ODCA14 Bit 13 TRISA13 RA13 LATA13 -- Bit 12 TRISA12 RA12 LATA12 -- Bit 11 -- -- -- -- Bit 10 TRISA10 RA10 LATA10 -- Bit 9 TRISA9 RA9 LATA9 -- Bit 8 -- -- -- -- Bit 7 TRISA7 RA7 LATA7 -- Bit 6 TRISA6 RA6 LATA6 -- Bit 5 TRISA5 RA5 LATA5 ODCA5 Bit 4 TRISA4 RA4 LATA4 ODCA4 Bit 3 TRISA3 RA3 LATA3 ODCA3 Bit 2 TRISA2 RA2 LATA2 ODCA2 Bit 1 TRISA1 RA1 LATA1 ODCA1 Bit 0 TRISA0 RA0 LATA0 ODCA0 All Resets F6FF xxxx xxxx 0000 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. TABLE 4-26: File Name TRISB PORTB LATB Legend: Note 1: Addr 02C6 02C8 02CA PORTB REGISTER MAP(1) Bit 15 TRISB15 RB15 LATB15 Bit 14 TRISB14 RB14 LATB14 Bit 13 TRISB13 RB13 LATB13 Bit 12 TRISB12 RB12 LATB12 Bit 11 TRISB11 RB11 LATB11 Bit 10 TRISB10 RB10 LATB10 Bit 9 TRISB9 RB9 LATB9 Bit 8 TRISB8 RB8 LATB8 Bit 7 TRISB7 RB7 LATB7 Bit 6 TRISB6 RB6 LATB6 Bit 5 TRISB5 RB5 LATB5 Bit 4 TRISB4 RB4 LATB4 Bit 3 TRISB3 RB3 LATB3 Bit 2 TRISB2 RB2 LATB2 Bit 1 TRISB1 RB1 LATB1 Bit 0 TRISB0 RB0 LATB0 All Resets FFFF xxxx xxxx x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. 2009 Microchip Technology Inc. TABLE 4-27: File Name TRISC PORTC LATC Legend: Note 1: Addr 02CC 02CE 02D0 PORTC REGISTER MAP(1) Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 -- -- -- Bit 10 -- -- -- Bit 9 -- -- -- Bit 8 -- -- -- Bit 7 -- -- -- Bit 6 -- -- -- Bit 5 -- -- -- Bit 4 TRISC4 RC4 LATC4 Bit 3 TRISC3 RC3 LATC3 Bit 2 TRISC2 RC2 LATC2 Bit 1 TRISC1 RC1 LATC1 Bit 0 -- -- -- All Resets F01E xxxx xxxx TRISC15 TRISC14 TRISC13 TRISC12 RC15 LATC15 RC14 LATC14 RC13 LATC13 RC12 LATC12 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-28: File Name TRISD PORTD LATD ODCD Legend: Note 1: Addr 02D2 02D4 02D6 06D2 PORTD REGISTER MAP(1) Bit 15 TRISD15 RD15 LATD15 ODCD15 Bit 14 TRISD14 RD14 LATD14 ODCD14 Bit 13 TRISD13 RD13 LATD13 ODCD13 Bit 12 TRISD12 RD12 LATD12 ODCD12 Bit 11 TRISD11 RD11 LATD11 ODCD11 Bit 10 TRISD10 RD10 LATD10 ODCD10 Bit 9 TRISD9 RD9 LATD9 ODCD9 Bit 8 TRISD8 RD8 LATD8 ODCD8 Bit 7 TRISD7 RD7 LATD7 ODCD7 Bit 6 TRISD6 RD6 LATD6 ODCD6 Bit 5 TRISD5 RD5 LATD5 ODCD5 Bit 4 TRISD4 RD4 LATD4 ODCD4 Bit 3 TRISD3 RD3 LATD3 ODCD3 Bit 2 TRISD2 RD2 LATD2 ODCD2 Bit 1 TRISD1 RD1 LATD1 ODCD1 Bit 0 TRISD0 RD0 LATD0 ODCD0 All Resets FFFF xxxx xxxx 0000 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. Preliminary DS70593B-page 67 TABLE 4-29: File Name TRISE PORTE LATE Legend: Note 1: Addr 02D8 02DA 02DC PORTE REGISTER MAP(1) Bit 15 -- -- -- Bit 14 -- -- -- Bit 13 -- -- -- Bit 12 -- -- -- Bit 11 -- -- -- Bit 10 -- -- -- Bit 9 -- -- -- Bit 8 -- -- -- Bit 7 TRISE7 RE7 LATE7 Bit 6 TRISE6 RE6 LATE6 Bit 5 TRISE5 RE5 LATE5 Bit 4 TRISE4 RE4 LATE4 Bit 3 TRISE3 RE3 LATE3 Bit 2 TRISE2 RE2 LATE2 Bit 1 TRISE1 RE1 LATE1 Bit 0 TRISE0 RE0 LATE0 All Resets 00FF xxxx xxxx x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. TABLE 4-30: File Name TRISF PORTF LATF ODCF Legend: Note 1: Addr 02DE 02E0 02E2 06DE PORTF REGISTER MAP(1) Bit 15 -- -- -- -- Bit 14 -- -- -- -- Bit 13 TRISF13 RF13 LATF13 ODCF13 Bit 12 TRISF12 RF12 LATF12 ODCF12 Bit 11 -- -- -- -- Bit 10 -- -- -- -- Bit 9 -- -- -- -- Bit 8 TRISF8 RF8 LATF8 ODCF8 Bit 7 TRISF7 RF7 LATF7 ODCF7 Bit 6 TRISF6 RF6 LATF6 ODCF6 Bit 5 TRISF5 RF5 LATF5 ODCF5 Bit 4 TRISF4 RF4 LATF4 ODCF4 Bit 3 TRISF3 RF3 LATF3 ODCF3 Bit 2 TRISF2 RF2 LATF2 ODCF2 Bit 1 TRISF1 RF1 LATF1 ODCF1 Bit 0 TRISF0 RF0 LATF0 ODCF0 All Resets 31FF xxxx xxxx 0000 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. TABLE 4-31: File Name TRISG PORTG LATG ODCG Legend: Note 1: Addr 02E4 02E6 02E8 06E4 PORTG REGISTER MAP(1) Bit 15 TRISG15 RG15 LATG15 ODCG15 Bit 14 TRISG14 RG14 LATG14 ODCG14 Bit 13 TRISG13 RG13 LATG13 ODCG13 Bit 12 TRISG12 RG12 LATG12 ODCG12 Bit 11 -- -- -- -- Bit 10 -- -- -- -- Bit 9 TRISG9 RG9 LATG9 ODCG9 Bit 8 TRISG8 RG8 LATG8 ODCG8 Bit 7 TRISG7 RG7 LATG7 ODCG7 Bit 6 TRISG6 RG6 LATG6 ODCG6 Bit 5 -- -- -- -- Bit 4 -- -- -- -- Bit 3 TRISG3 RG3 LATG3 ODCG3 Bit 2 TRISG2 RG2 LATG2 ODCG2 Bit 1 TRISG1 RG1 LATG1 ODCG1 Bit 0 TRISG0 RG0 LATG0 ODCG0 All Resets F3CF xxxx xxxx 0000 DS70593B-page 68 dsPIC33FJXXXGPX06A/X08A/X10A x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal for PinHigh devices. The actual set of I/O port pins varies from one device to another. Please refer to the corresponding pinout diagrams. TABLE 4-32: File Name RCON OSCCON CLKDIV PLLFBD Addr 0740 0742 0744 0746 0748 SYSTEM CONTROL REGISTER MAP Bit 15 TRAPR -- ROI -- -- -- -- Bit 14 IOPUWR Bit 13 -- COSC<2:0> DOZE<2:0> -- -- -- -- Bit 12 -- Bit 11 -- -- DOZEN -- -- -- -- Bit 10 -- Bit 9 -- NOSC<2:0> FRCDIV<2:0> -- -- -- -- -- Bit 8 VREGS Bit 7 EXTR CLKLOCK Bit 6 SWR -- Bit 5 SWDTEN LOCK -- PLLDIV<8:0> TUN<5:0> Bit 4 WDTO -- Bit 3 SLEEP CF Bit 2 IDLE -- Bit 1 BOR LPOSCEN Bit 0 POR OSWEN All Resets xxxx(1) 0300(2) 3040 0030 0000 PLLPOST<1:0> PLLPRE<4:0> Preliminary 2009 Microchip Technology Inc. OSCTUN Legend: Note 1: 2: x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. RCON register Reset values dependent on type of Reset. OSCCON register Reset values dependent on the FOSC Configuration bits and by type of Reset. TABLE 4-33: File Name NVMCON NVMKEY Legend: Note 1: Addr 0760 0766 NVM REGISTER MAP Bit 15 WR -- Bit 14 WREN -- Bit 13 WRERR -- Bit 12 -- -- Bit 11 -- -- Bit 10 -- -- Bit 9 -- -- Bit 8 -- -- Bit 7 -- Bit 6 ERASE Bit 5 -- Bit 4 -- NVMKEY<7:0> Bit 3 Bit 2 Bit 1 Bit 0 All Resets 0000(1) 0000 NVMOP<3:0> x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. Reset value shown is for POR only. Value on other Reset states is dependent on the state of memory write or erase operations at the time of Reset. TABLE 4-34: File Name PMD1 PMD2 PMD3 Legend: Addr 0770 0772 0774 PMD REGISTER MAP Bit 15 T5MD IC8MD T9MD Bit 14 T4MD IC7MD T8MD Bit 13 T3MD IC6MD T7MD Bit 12 T2MD IC5MD T6MD Bit 11 T1MD IC4MD -- Bit 10 -- IC3MD -- Bit 9 -- IC2MD -- Bit 8 DCIMD IC1MD -- Bit 7 I2C1MD OC8MD -- Bit 6 U2MD OC7MD -- Bit 5 U1MD OC6MD -- Bit 4 SPI2MD OC5MD -- Bit 3 SPI1MD OC4MD -- Bit 2 C2MD OC3MD -- Bit 1 C1MD OC2MD I2C2MD Bit 0 AD1MD OC1MD AD2MD All Resets 0000 0000 0000 x = unknown value on Reset, -- = unimplemented, read as `0'. Reset values are shown in hexadecimal. dsPIC33FJXXXGPX06A/X08A/X10A 4.2.7 SOFTWARE STACK 4.2.8 DATA RAM PROTECTION FEATURE In addition to its use as a working register, the W15 register in the dsPIC33FJXXXGPX06A/X08A/X10A devices is also used as a software Stack Pointer. The Stack Pointer always points to the first available free word and grows from lower to higher addresses. It pre-decrements for stack pops and post-increments for stack pushes, as shown in Figure 4-6. For a PC push during any CALL instruction, the MSb of the PC is zero-extended before the push, ensuring that the MSb is always clear. Note: A PC push during exception processing concatenates the SRL register to the MSb of the PC prior to the push. The dsPIC33F product family supports Data RAM protection features which enable segments of RAM to be protected when used in conjunction with Boot and Secure Code Segment Security. BSRAM (Secure RAM segment for BS) is accessible only from the Boot Segment Flash code when enabled. SSRAM (Secure RAM segment for RAM) is accessible only from the Secure Segment Flash code when enabled. See Table 4-1 for an overview of the BSRAM and SSRAM SFRs. 4.3 Instruction Addressing Modes The Stack Pointer Limit register (SPLIM) associated with the Stack Pointer sets an upper address boundary for the stack. SPLIM is uninitialized at Reset. As is the case for the Stack Pointer, SPLIM<0> is forced to `0' because all stack operations must be word-aligned. Whenever an EA is generated using W15 as a source or destination pointer, the resulting address is compared with the value in SPLIM. If the contents of the Stack Pointer (W15) and the SPLIM register are equal and a push operation is performed, a stack error trap will not occur. The stack error trap will occur on a subsequent push operation. Thus, for example, if it is desirable to cause a stack error trap when the stack grows beyond address 0x2000 in RAM, initialize the SPLIM with the value 0x1FFE. Similarly, a Stack Pointer underflow (stack error) trap is generated when the Stack Pointer address is found to be less than 0x0800. This prevents the stack from interfering with the Special Function Register (SFR) space. A write to the SPLIM register should not be immediately followed by an indirect read operation using W15. The addressing modes in Table 4-35 form the basis of the addressing modes optimized to support the specific features of individual instructions. The addressing modes provided in the MAC class of instructions are somewhat different from those in the other instruction types. 4.3.1 FILE REGISTER INSTRUCTIONS Most file register instructions use a 13-bit address field (f) to directly address data present in the first 8192 bytes of data memory (Near Data Space). Most file register instructions employ a working register, W0, which is denoted as WREG in these instructions. The destination is typically either the same file register or WREG (with the exception of the MUL instruction), which writes the result to a register or register pair. The MOV instruction allows additional flexibility and can access the entire data space. 4.3.2 MCU INSTRUCTIONS The 3-operand MCU instructions are of the form: Operand 3 = Operand 1 FIGURE 4-6: 0x0000 15 CALL STACK FRAME 0 Stack Grows Towards Higher Address PC<15:0> 000000000 PC<22:16> W15 (before CALL) W15 (after CALL) POP : [--W15] PUSH : [W15++] 2009 Microchip Technology Inc. Preliminary DS70593B-page 69 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 4-35: FUNDAMENTAL ADDRESSING MODES SUPPORTED Description The address of the file register is specified explicitly. The contents of a register are accessed directly. The contents of Wn forms the EA. The contents of Wn forms the EA. Wn is post-modified (incremented or decremented) by a constant value. Wn is pre-modified (incremented or decremented) by a signed constant value to form the EA. The sum of Wn and a literal forms the EA. The 2-source operand prefetch registers must be members of the set {W8, W9, W10, W11}. For data reads, W8 and W9 are always directed to the X RAGU and W10 and W11 will always be directed to the Y AGU. The effective addresses generated (before and after modification) must, therefore, be valid addresses within X data space for W8 and W9 and Y data space for W10 and W11. Note: Register Indirect with Register Offset Addressing mode is only available for W9 (in X space) and W11 (in Y space). Addressing Mode File Register Direct Register Direct Register Indirect Register Indirect Post-Modified Register Indirect Pre-Modified Register Indirect with Register Offset The sum of Wn and Wb forms the EA. Register Indirect with Literal Offset 4.3.3 MOVE AND ACCUMULATOR INSTRUCTIONS Move instructions and the DSP accumulator class of instructions provide a greater degree of addressing flexibility than other instructions. In addition to the Addressing modes supported by most MCU instructions, move and accumulator instructions also support Register Indirect with Register Offset Addressing mode, also referred to as Register Indexed mode. Note: For the MOV instructions, the Addressing mode specified in the instruction can differ for the source and destination EA. However, the 4-bit Wb (Register Offset) field is shared between both source and destination (but typically only used by one). In summary, the following addressing modes are supported by the MAC class of instructions: * * * * * Register Indirect Register Indirect Post-Modified by 2 Register Indirect Post-Modified by 4 Register Indirect Post-Modified by 6 Register Indirect with Register Offset (Indexed) In summary, the following Addressing modes are supported by move and accumulator instructions: * * * * * * * * Register Direct Register Indirect Register Indirect Post-modified Register Indirect Pre-modified Register Indirect with Register Offset (Indexed) Register Indirect with Literal Offset 8-bit Literal 16-bit Literal Note: Not all instructions support all the Addressing modes given above. Individual instructions may support different subsets of these Addressing modes. 4.3.5 OTHER INSTRUCTIONS Besides the various addressing modes outlined above, some instructions use literal constants of various sizes. For example, BRA (branch) instructions use 16-bit signed literals to specify the branch destination directly, whereas the DISI instruction uses a 14-bit unsigned literal field. In some instructions, such as ADD Acc, the source of an operand or result is implied by the opcode itself. Certain operations, such as NOP, do not have any operands. 4.4 Modulo Addressing 4.3.4 MAC INSTRUCTIONS The dual source operand DSP instructions (CLR, ED, EDAC, MAC, MPY, MPY.N, MOVSAC and MSC), also referred to as MAC instructions, utilize a simplified set of addressing modes to allow the user to effectively manipulate the data pointers through register indirect tables. Modulo Addressing mode is a method of providing an automated means to support circular data buffers using hardware. The objective is to remove the need for software to perform data address boundary checks when executing tightly looped code, as is typical in many DSP algorithms. Modulo Addressing can operate in either data or program space (since the data pointer mechanism is essentially the same for both). One circular buffer can be supported in each of the X (which also provides the pointers into program space) and Y data spaces. Modulo Addressing DS70593B-page 70 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A can operate on any W register pointer. However, it is not advisable to use W14 or W15 for Modulo Addressing since these two registers are used as the Stack Frame Pointer and Stack Pointer, respectively. In general, any particular circular buffer can only be configured to operate in one direction as there are certain restrictions on the buffer start address (for incrementing buffers), or end address (for decrementing buffers), based upon the direction of the buffer. The only exception to the usage restrictions is for buffers which have a power-of-2 length. As these buffers satisfy the start and end address criteria, they may operate in a bidirectional mode (i.e., address boundary checks will be performed on both the lower and upper address boundaries). The length of a circular buffer is not directly specified. It is determined by the difference between the corresponding start and end addresses. The maximum possible length of the circular buffer is 32K words (64 Kbytes). 4.4.2 W ADDRESS REGISTER SELECTION The Modulo and Bit-Reversed Addressing Control register, MODCON<15:0>, contains enable flags as well as a W register field to specify the W Address registers. The XWM and YWM fields select which registers will operate with Modulo Addressing. If XWM = 15, X RAGU and X WAGU Modulo Addressing is disabled. Similarly, if YWM = 15, Y AGU Modulo Addressing is disabled. The X Address Space Pointer W register (XWM), to which Modulo Addressing is to be applied, is stored in MODCON<3:0> (see Table 4-1). Modulo Addressing is enabled for X data space when XWM is set to any value other than `15' and the XMODEN bit is set at MODCON<15>. The Y Address Space Pointer W register (YWM) to which Modulo Addressing is to be applied is stored in MODCON<7:4>. Modulo Addressing is enabled for Y data space when YWM is set to any value other than `15' and the YMODEN bit is set at MODCON<14>. 4.4.1 START AND END ADDRESS The Modulo Addressing scheme requires that a starting and ending address be specified and loaded into the 16-bit Modulo Buffer Address registers: XMODSRT, XMODEND, YMODSRT and YMODEND (see Table 4-1). Note: Y space Modulo Addressing EA calculations assume word sized data (LSb of every EA is always clear). FIGURE 4-7: Byte Address MODULO ADDRESSING OPERATION EXAMPLE MOV MOV MOV MOV MOV MOV MOV MOV #0x1100, W0 W0, XMODSRT #0x1163, W0 W0, MODEND #0x8001, W0 W0, MODCON #0x0000, W0 #0x1110, W1 ;set modulo start address ;set modulo end address ;enable W1, X AGU for modulo ;W0 holds buffer fill value ;point W1 to buffer ;fill the 50 buffer locations ;fill the next location ;increment the fill value 0x1100 DO AGAIN, #0x31 MOV W0, [W1++] AGAIN: INC W0, W0 0x1163 Start Addr = 0x1100 End Addr = 0x1163 Length = 0x0032 words 2009 Microchip Technology Inc. Preliminary DS70593B-page 71 dsPIC33FJXXXGPX06A/X08A/X10A 4.4.3 MODULO ADDRESSING APPLICABILITY Modulo Addressing can be applied to the Effective Address (EA) calculation associated with any W register. It is important to realize that the address boundaries check for addresses less than, or greater than, the upper (for incrementing buffers) and lower (for decrementing buffers) boundary addresses (not just equal to). Address changes may, therefore, jump beyond boundaries and still be adjusted correctly. Note: The modulo corrected effective address is written back to the register only when Pre-Modify or Post-Modify Addressing mode is used to compute the effective address. When an address offset (e.g., [W7+W2]) is used, Modulo Address correction is performed but the contents of the register remain unchanged. If the length of a bit-reversed buffer is M = 2N bytes, the last `N' bits of the data buffer start address must be zeros. XB<14:0> is the Bit-Reversed Address modifier, or `pivot point', which is typically a constant. In the case of an FFT computation, its value is equal to half of the FFT data buffer size. Note: All bit-reversed EA calculations assume word sized data (LSb of every EA is always clear). The XB value is scaled accordingly to generate compatible (byte) addresses. 4.5 Bit-Reversed Addressing Bit-Reversed Addressing mode is intended to simplify data re-ordering for radix-2 FFT algorithms. It is supported by the X AGU for data writes only. The modifier, which may be a constant value or register contents, is regarded as having its bit order reversed. The address source and destination are kept in normal order. Thus, the only operand requiring reversal is the modifier. When enabled, Bit-Reversed Addressing is only executed for Register Indirect with Pre-Increment or Post-Increment Addressing and word sized data writes. It will not function for any other addressing mode or for byte sized data and normal addresses are generated instead. When Bit-Reversed Addressing is active, the W Address Pointer is always added to the address modifier (XB) and the offset associated with the Register Indirect Addressing mode is ignored. In addition, as word sized data is a requirement, the LSb of the EA is ignored (and always clear). Note: Modulo Addressing and Bit-Reversed Addressing should not be enabled together. In the event that the user attempts to do so, Bit-Reversed Addressing will assume priority when active for the X WAGU and X WAGU Modulo Addressing will be disabled. However, Modulo Addressing will continue to function in the X RAGU. 4.5.1 BIT-REVERSED ADDRESSING IMPLEMENTATION Bit-Reversed Addressing mode is enabled when: 1. BWM bits (W register selection) in the MODCON register are any value other than `15' (the stack cannot be accessed using Bit-Reversed Addressing). The BREN bit is set in the XBREV register. The addressing mode used is Register Indirect with Pre-Increment or Post-Increment. 2. 3. If Bit-Reversed Addressing has already been enabled by setting the BREN (XBREV<15>) bit, then a write to the XBREV register should not be immediately followed by an indirect read operation using the W register that has been designated as the bit-reversed pointer. DS70593B-page 72 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 4-8: BIT-REVERSED ADDRESS EXAMPLE Sequential Address b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 0 Bit Locations Swapped Left-to-Right Around Center of Binary Value b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b1 b2 b3 b4 0 Bit-Reversed Address Pivot Point XB = 0x0008 for a 16-Word Bit-Reversed Buffer TABLE 4-36: A3 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 A2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 BIT-REVERSED ADDRESS SEQUENCE (16-ENTRY) Normal Address A1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 A0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Decimal 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 A3 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 A2 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 Bit-Reversed Address A1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 A0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 Decimal 0 8 4 12 2 10 6 14 1 9 5 13 3 11 7 15 2009 Microchip Technology Inc. Preliminary DS70593B-page 73 dsPIC33FJXXXGPX06A/X08A/X10A 4.6 Interfacing Program and Data Memory Spaces 4.6.1 ADDRESSING PROGRAM SPACE Since the address ranges for the data and program spaces are 16 and 24 bits, respectively, a method is needed to create a 23-bit or 24-bit program address from 16-bit data registers. The solution depends on the interface method to be used. For table operations, the 8-bit Table Page register (TBLPAG) is used to define a 32K word region within the program space. This is concatenated with a 16-bit EA to arrive at a full 24-bit program space address. In this format, the Most Significant bit of TBLPAG is used to determine if the operation occurs in the user memory (TBLPAG<7> = 0) or the configuration memory (TBLPAG<7> = 1). For remapping operations, the 8-bit Program Space Visibility register (PSVPAG) is used to define a 16K word page in the program space. When the Most Significant bit of the EA is `1', PSVPAG is concatenated with the lower 15 bits of the EA to form a 23-bit program space address. Unlike table operations, this limits remapping operations strictly to the user memory area. Table 4-37 and Figure 4-9 show how the program EA is created for table operations and remapping accesses from the data EA. Here, P<23:0> refers to a program space word, whereas D<15:0> refers to a data space word. The dsPIC33FJXXXGPX06A/X08A/X10A architecture uses a 24-bit wide program space and a 16-bit wide data space. The architecture is also a modified Harvard scheme, meaning that data can also be present in the program space. To use this data successfully, it must be accessed in a way that preserves the alignment of information in both spaces. Aside from normal execution, the dsPIC33FJXXXGPX06A/X08A/X10A architecture provides two methods by which program space can be accessed during operation: * Using table instructions to access individual bytes or words anywhere in the program space * Remapping a portion of the program space into the data space (Program Space Visibility) Table instructions allow an application to read or write to small areas of the program memory. This capability makes the method ideal for accessing data tables that need to be updated from time to time. It also allows access to all bytes of the program word. The remapping method allows an application to access a large block of data on a read-only basis, which is ideal for look ups from a large table of static data. It can only access the least significant word of the program word. TABLE 4-37: PROGRAM SPACE ADDRESS CONSTRUCTION Access Space User User Configuration Program Space Address <23> 0 0xx xxxx TBLPAG<7:0> 0xxx xxxx TBLPAG<7:0> 1xxx xxxx 0 0 PSVPAG<7:0> xxxx xxxx <22:16> <15> PC<22:1> xxxx xxxx xxxx xxx0 Data EA<15:0> xxxx xxxx xxxx xxxx Data EA<15:0> xxxx xxxx xxxx xxxx Data EA<14:0>(1) xxx xxxx xxxx xxxx <14:1> <0> 0 Access Type Instruction Access (Code Execution) TBLRD/TBLWT (Byte/Word Read/Write) Program Space Visibility (Block Remap/Read) Note 1: User Data EA<15> is always `1' in this case, but is not used in calculating the program space address. Bit 15 of the address is PSVPAG<0>. DS70593B-page 74 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 4-9: DATA ACCESS FROM PROGRAM SPACE ADDRESS GENERATION Program Counter(1) 0 Program Counter 23 bits 0 EA Table Operations(2) 1/0 TBLPAG 8 bits 24 bits 16 bits 1/0 Select Program Space Visibility(1) (Remapping) 0 PSVPAG 8 bits 1 EA 0 15 bits 23 bits User/Configuration Space Select Byte Select Note 1: The LSb of program space addresses is always fixed as `0' in order to maintain word alignment of data in the program and data spaces. 2: Table operations are not required to be word-aligned. Table read operations are permitted in the configuration memory space. 2009 Microchip Technology Inc. Preliminary DS70593B-page 75 dsPIC33FJXXXGPX06A/X08A/X10A 4.6.2 DATA ACCESS FROM PROGRAM MEMORY USING TABLE INSTRUCTIONS 2. TBLRDH (Table Read High): In Word mode, it maps the entire upper word of a program address (P<23:16>) to a data address. Note that D<15:8>, the `phantom byte', will always be `0'. In Byte mode, it maps the upper or lower byte of the program word to D<7:0> of the data address, as above. Note that the data will always be `0' when the upper `phantom' byte is selected (Byte Select = 1). In a similar fashion, two table instructions, TBLWTH and TBLWTL, are used to write individual bytes or words to a program space address. The details of their operation are explained in Section 5.0 "Flash Program Memory". For all table operations, the area of program memory space to be accessed is determined by the Table Page register (TBLPAG). TBLPAG covers the entire program memory space of the device, including user and configuration spaces. When TBLPAG<7> = 0, the table page is located in the user memory space. When TBLPAG<7> = 1, the page is located in configuration space. The TBLRDL and TBLWTL instructions offer a direct method of reading or writing the lower word of any address within the program space without going through data space. The TBLRDH and TBLWTH instructions are the only method to read or write the upper 8 bits of a program space word as data. The PC is incremented by two for each successive 24-bit program word. This allows program memory addresses to directly map to data space addresses. Program memory can thus be regarded as two 16-bit word wide address spaces, residing side by side, each with the same address range. TBLRDL and TBLWTL access the space which contains the least significant data word and TBLRDH and TBLWTH access the space which contains the upper data byte. Two table instructions are provided to move byte or word sized (16-bit) data to and from program space. Both function as either byte or word operations. 1. TBLRDL (Table Read Low): In Word mode, it maps the lower word of the program space location (P<15:0>) to a data address (D<15:0>). In Byte mode, either the upper or lower byte of the lower program word is mapped to the lower byte of a data address. The upper byte is selected when Byte Select is `1'; the lower byte is selected when it is `0'. FIGURE 4-10: TBLPAG ACCESSING PROGRAM MEMORY WITH TABLE INSTRUCTIONS Program Space 02 23 15 0 0x000000 00000000 00000000 23 16 8 0 0x020000 0x030000 00000000 00000000 `Phantom' Byte TBLRDH.B (Wn<0> = 0) TBLRDL.B (Wn<0> = 1) TBLRDL.B (Wn<0> = 0) TBLRDL.W The address for the table operation is determined by the data EA within the page defined by the TBLPAG register. Only read operations are shown; write operations are also valid in the user memory area. 0x800000 DS70593B-page 76 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 4.6.3 READING DATA FROM PROGRAM MEMORY USING PROGRAM SPACE VISIBILITY 24-bit program word are used to contain the data. The upper 8 bits of any program space location used as data should be programmed with `1111 1111' or `0000 0000' to force a NOP. This prevents possible issues should the area of code ever be accidentally executed. Note: PSV access is temporarily disabled during table reads/writes. The upper 32 Kbytes of data space may optionally be mapped into any 16K word page of the program space. This option provides transparent access of stored constant data from the data space without the need to use special instructions (i.e., TBLRDL/H). Program space access through the data space occurs if the Most Significant bit of the data space EA is `1' and program space visibility is enabled by setting the PSV bit in the Core Control register (CORCON<2>). The location of the program memory space to be mapped into the data space is determined by the Program Space Visibility Page register (PSVPAG). This 8-bit register defines any one of 256 possible pages of 16K words in program space. In effect, PSVPAG functions as the upper 8 bits of the program memory address, with the 15 bits of the EA functioning as the lower bits. Note that by incrementing the PC by 2 for each program memory word, the lower 15 bits of data space addresses directly map to the lower 15 bits in the corresponding program space addresses. Data reads to this area add an additional cycle to the instruction being executed, since two program memory fetches are required. Although each data space address, 8000h and higher, maps directly into a corresponding program memory address (see Figure 4-11), only the lower 16 bits of the For operations that use PSV and are executed outside a REPEAT loop, the MOV and MOV.D instructions require one instruction cycle in addition to the specified execution time. All other instructions require two instruction cycles in addition to the specified execution time. For operations that use PSV, which are executed inside a REPEAT loop, there will be some instances that require two instruction cycles in addition to the specified execution time of the instruction: * Execution in the first iteration * Execution in the last iteration * Execution prior to exiting the loop due to an interrupt * Execution upon re-entering the loop after an interrupt is serviced Any other iteration of the REPEAT loop will allow the instruction accessing data, using PSV, to execute in a single cycle. FIGURE 4-11: PROGRAM SPACE VISIBILITY OPERATION When CORCON<2> = 1 and EA<15> = 1: Program Space PSVPAG 02 23 15 0 0x000000 0x010000 0x018000 The data in the page designated by PSVPAG is mapped into the upper half of the data memory space... Data Space 0x0000 Data EA<14:0> 0x8000 PSV Area ...while the lower 15 bits of the EA specify an exact address within 0xFFFF the PSV area. This corresponds exactly to the same lower 15 bits of the actual program space address. 0x800000 2009 Microchip Technology Inc. Preliminary DS70593B-page 77 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 78 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 5.0 FLASH PROGRAM MEMORY Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 5. "Flash Programming" (DS70191) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The dsPIC33FJXXXGPX06A/X08A/X10A devices contain internal Flash program memory for storing and executing application code. The memory is readable, writable and erasable during normal operation over the entire VDD range. Flash memory can be programmed in two ways: 1. 2. In-Circuit Serial ProgrammingTM (ICSPTM) programming capability Run-Time Self-Programming (RTSP) Master Clear (MCLR). This allows customers to manufacture boards with unprogrammed devices and then program the digital signal controller just before shipping the product. This also allows the most recent firmware or a custom firmware to be programmed. RTSP is accomplished using TBLRD (table read) and TBLWT (table write) instructions. With RTSP, the user can write program memory data either in blocks or `rows' of 64 instructions (192 bytes) at a time or a single program memory word, and erase program memory in blocks or `pages' of 512 instructions (1536 bytes) at a time. 5.1 Table Instructions and Flash Programming Regardless of the method used, all programming of Flash memory is done with the table read and table write instructions. These allow direct read and write access to the program memory space from the data memory while the device is in normal operating mode. The 24-bit target address in the program memory is formed using bits<7:0> of the TBLPAG register and the Effective Address (EA) from a W register specified in the table instruction, as shown in Figure 5-1. The TBLRDL and the TBLWTL instructions are used to read or write to bits<15:0> of program memory. TBLRDL and TBLWTL can access program memory in both Word and Byte modes. The TBLRDH and TBLWTH instructions are used to read or write to bits<23:16> of program memory. TBLRDH and TBLWTH can also access program memory in Word or Byte mode. ICSP allows a dsPIC33FJXXXGPX06A/X08A/X10A device to be serially programmed while in the end application circuit. This is simply done with two lines for programming clock and programming data (one of the alternate programming pin pairs: PGECx/PGEDx), and three other lines for power (VDD), ground (VSS) and FIGURE 5-1: ADDRESSING FOR TABLE REGISTERS 24 bits Using Program Counter 0 Program Counter 0 Working Reg EA Using Table Instruction 1/0 TBLPAG Reg 8 bits 16 bits User/Configuration Space Select 24-bit EA Byte Select 2009 Microchip Technology Inc. Preliminary DS70593B-page 79 dsPIC33FJXXXGPX06A/X08A/X10A 5.2 RTSP Operation 5.3 Programming Operations The dsPIC33FJXXXGPX06A/X08A/X10A Flash program memory array is organized into rows of 64 instructions or 192 bytes. RTSP allows the user to erase a page of memory, which consists of eight rows (512 instructions) at a time, and to program one row or one word at a time. Table 25-12 illustrates typical erase and programming times. The 8-row erase pages and single row write rows are edge-aligned, from the beginning of program memory, on boundaries of 1536 bytes and 192 bytes, respectively. The program memory implements holding buffers that can contain 64 instructions of programming data. Prior to the actual programming operation, the write data must be loaded into the buffers in sequential order. The instruction words loaded must always be from a group of 64 boundary. The basic sequence for RTSP programming is to set up a Table Pointer, then do a series of TBLWT instructions to load the buffers. Programming is performed by setting the control bits in the NVMCON register. A total of 64 TBLWTL and TBLWTH instructions are required to load the instructions. All of the table write operations are single-word writes (two instruction cycles) because only the buffers are written. A programming cycle is required for programming each row. A complete programming sequence is necessary for programming or erasing the internal Flash in RTSP mode. The processor stalls (waits) until the programming operation is finished. The programming time depends on the FRC accuracy (see Table 25-19) and the value of the FRC Oscillator Tuning register (see Register 9-4). Use the following formula to calculate the minimum and maximum values for the Row Write Time, Page Erase Time and Word Write Cycle Time parameters (see Table 25-12). EQUATION 5-1: PROGRAMMING TIME T ------------------------------------------------------------------------------------------------------------------------7.37 MHz FRC Accuracy % FRC Tuning % For example, if the device is operating at +125C, the FRC accuracy will be 5%. If the TUN<5:0> bits (see Register 9-4) are set to `b111111, the Minimum Row Write Time is: 11064 Cycles T RW = ---------------------------------------------------------------------------------------------- = 1.435ms 7.37 MHz 1 + 0.05 1 - 0.00375 and, the Maximum Row Write Time is: 11064 Cycles T RW = --------------------------------------------------------------------------------------------- = 1.586ms 7.37 MHz 1 - 0.05 1 - 0.00375 Setting the WR bit (NVMCON<15>) starts the operation, and the WR bit is automatically cleared when the operation is finished. 5.4 Control Registers There are two SFRs used to read and write the program Flash memory: * NVMCON: Flash Memory Control Register * NVMKEY: Non-Volatile Memory Key Register The NVMCON register (Register 5-1) controls which blocks are to be erased, which memory type is to be programmed and the start of the programming cycle. NVMKEY (Register 5-2) is a write-only register that is used for write protection. To start a programming or erase sequence, the user must consecutively write 55h and AAh to the NVMKEY register. Refer to Section 5.3 "Programming Operations" for further details. DS70593B-page 80 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 5-1: R/SO-0(1) WR bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 SO = Settable only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0(1) ERASE U-0 -- U-0 -- R/W-0(1) R/W-0(1) R/W-0(1) NVMCON: FLASH MEMORY CONTROL REGISTER R/W-0(1) WREN R/W-0(1) WRERR U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0(1) bit 0 NVMOP<3:0>(2) WR: Write Control bit 1 = Initiates a Flash memory program or erase operation. The operation is self-timed and the bit is cleared by hardware once operation is complete 0 = Program or erase operation is complete and inactive WREN: Write Enable bit 1 = Enable Flash program/erase operations 0 = Inhibit Flash program/erase operations WRERR: Write Sequence Error Flag bit 1 = An improper program or erase sequence attempt or termination has occurred (bit is set automatically on any set attempt of the WR bit) 0 = The program or erase operation completed normally Unimplemented: Read as `0' ERASE: Erase/Program Enable bit 1 = Perform the erase operation specified by NVMOP<3:0> on the next WR command 0 = Perform the program operation specified by NVMOP<3:0> on the next WR command Unimplemented: Read as `0' NVMOP<3:0>: NVM Operation Select bits(2) If ERASE = 1: 1111 = Memory bulk erase operation 1110 = Reserved 1101 = Erase General Segment 1100 = Erase Secure Segment 1011 = Reserved 0011 = No operation 0010 = Memory page erase operation 0001 = No operation 0000 = Erase a single Configuration register byte If ERASE = 0: 1111 = No operation 1110 = Reserved 1101 = No operation 1100 = No operation 1011 = Reserved 0011 = Memory word program operation 0010 = No operation 0001 = Memory row program operation 0000 = Program a single Configuration register byte bit 14 bit 13 bit 12-7 bit 6 bit 5-4 bit 3-0 Note 1: These bits can only be reset on POR. 2: All other combinations of NVMOP<3:0> are unimplemented. 2009 Microchip Technology Inc. Preliminary DS70593B-page 81 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 5-2: U-0 -- bit 15 W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7-0 SO = Settable only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown W-0 W-0 W-0 W-0 W-0 W-0 W-0 bit 0 NVMKEY: NON-VOLATILE MEMORY KEY REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 NVMKEY<7:0> Unimplemented: Read as `0' NVMKEY<7:0>: Key Register (Write Only) bits DS70593B-page 82 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 5.4.1 PROGRAMMING ALGORITHM FOR FLASH PROGRAM MEMORY 4. 5. The user can program one row of program Flash memory at a time. To do this, it is necessary to erase the 8-row erase page that contains the desired row. The general process is: 1. 2. 3. Read eight rows of program memory (512 instructions) and store in data RAM. Update the program data in RAM with the desired new data. Erase the block (see Example 5-1): a) Set the NVMOP bits (NVMCON<3:0>) to `0010' to configure for block erase. Set the ERASE (NVMCON<6>) and WREN (NVMCON<14>) bits. b) Write the starting address of the page to be erased into the TBLPAG and W registers. c) Write 55h to NVMKEY. d) Write AAh to NVMKEY. e) Set the WR bit (NVMCON<15>). The erase cycle begins and the CPU stalls for the duration of the erase cycle. When the erase is done, the WR bit is cleared automatically. Write the first 64 instructions from data RAM into the program memory buffers (see Example 5-2). Write the program block to Flash memory: a) Set the NVMOP bits to `0001' to configure for row programming. Clear the ERASE bit and set the WREN bit. b) Write #0x55 to NVMKEY. c) Write #0xAA to NVMKEY. d) Set the WR bit. The programming cycle begins and the CPU stalls for the duration of the write cycle. When the write to Flash memory is done, the WR bit is cleared automatically. Repeat steps 4 and 5, using the next available 64 instructions from the block in data RAM by incrementing the value in TBLPAG, until all 512 instructions are written back to Flash memory. 6. For protection against accidental operations, the write initiate sequence for NVMKEY must be used to allow any erase or program operation to proceed. After the programming command has been executed, the user must wait for the programming time until programming is complete. The two instructions following the start of the programming sequence should be NOPs, as shown in Example 5-3. EXAMPLE 5-1: ERASING A PROGRAM MEMORY PAGE ; ; Initialize NVMCON ; ; ; ; ; ; ; ; ; ; ; ; ; Set up NVMCON for block erase operation MOV #0x4042, W0 MOV W0, NVMCON ; Init pointer to row to be ERASED MOV #tblpage(PROG_ADDR), W0 MOV W0, TBLPAG MOV #tbloffset(PROG_ADDR), W0 TBLWTL W0, [W0] DISI #5 MOV MOV MOV MOV BSET NOP NOP #0x55, W0 W0, NVMKEY #0xAA, W1 W1, NVMKEY NVMCON, #WR Initialize PM Page Boundary SFR Initialize in-page EA[15:0] pointer Set base address of erase block Block all interrupts with priority <7 for next 5 instructions Write the 55 key Write the AA key Start the erase sequence Insert two NOPs after the erase command is asserted 2009 Microchip Technology Inc. Preliminary DS70593B-page 83 dsPIC33FJXXXGPX06A/X08A/X10A EXAMPLE 5-2: LOADING THE WRITE BUFFERS ; Set up NVMCON for row programming operations MOV #0x4001, W0 ; MOV W0, NVMCON ; Initialize NVMCON ; Set up a pointer to the first program memory location to be written ; program memory selected, and writes enabled MOV #0x0000, W0 ; MOV W0, TBLPAG ; Initialize PM Page Boundary SFR MOV #0x6000, W0 ; An example program memory address ; Perform the TBLWT instructions to write the latches ; 0th_program_word MOV #LOW_WORD_0, W2 ; MOV #HIGH_BYTE_0, W3 ; TBLWTL W2, [W0] ; Write PM low word into program latch TBLWTH W3, [W0++] ; Write PM high byte into program latch ; 1st_program_word MOV #LOW_WORD_1, W2 ; MOV #HIGH_BYTE_1, W3 ; TBLWTL W2, [W0] ; Write PM low word into program latch TBLWTH W3, [W0++] ; Write PM high byte into program latch ; 2nd_program_word MOV #LOW_WORD_2, W2 ; MOV #HIGH_BYTE_2, W3 ; ; Write PM low word into program latch TBLWTL W2, [W0] ; Write PM high byte into program latch TBLWTH W3, [W0++] * * * ; 63rd_program_word MOV #LOW_WORD_31, W2 ; MOV #HIGH_BYTE_31, W3 ; ; Write PM low word into program latch TBLWTL W2, [W0] ; Write PM high byte into program latch TBLWTH W3, [W0++] EXAMPLE 5-3: DISI MOV MOV MOV MOV BSET NOP NOP #5 INITIATING A PROGRAMMING SEQUENCE ; Block all interrupts with priority <7 ; for next 5 instructions ; ; ; ; ; ; Write the 55 key Write the AA key Start the erase sequence Insert two NOPs after the erase command is asserted #0x55, W0 W0, NVMKEY #0xAA, W1 W1, NVMKEY NVMCON, #WR DS70593B-page 84 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 6.0 RESET A simplified block diagram of the Reset module is shown in Figure 6-1. Any active source of Reset will make the SYSRST signal active. Many registers associated with the CPU and peripherals are forced to a known Reset state. Most registers are unaffected by a Reset; their status is unknown on POR and unchanged by all other Resets. Note: Refer to the specific peripheral or CPU section of this manual for register Reset states. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 8. "Reset" (DS70192) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The Reset module combines all Reset sources and controls the device Master Reset Signal, SYSRST. The following is a list of device Reset sources: * * * * * * * POR: Power-on Reset BOR: Brown-out Reset MCLR: Master Clear Pin Reset SWR: RESET Instruction WDT: Watchdog Timer Reset TRAPR: Trap Conflict Reset IOPUWR: Illegal Opcode and Uninitialized W Register Reset All types of device Reset will set a corresponding status bit in the RCON register to indicate the type of Reset (see Register 6-1). A POR will clear all bits, except for the POR bit (RCON<0>), that are set. The user can set or clear any bit at any time during code execution. The RCON bits only serve as status bits. Setting a particular Reset status bit in software does not cause a device Reset to occur. The RCON register also has other bits associated with the Watchdog Timer and device power-saving states. The function of these bits is discussed in other sections of this manual. Note: The status bits in the RCON register should be cleared after they are read so that the next RCON register value after a device Reset will be meaningful. FIGURE 6-1: RESET SYSTEM BLOCK DIAGRAM RESET Instruction Glitch Filter MCLR WDT Module Sleep or Idle BOR SYSRST POR Internal Regulator VDD VDD Rise Detect Trap Conflict Illegal Opcode Uninitialized W Register 2009 Microchip Technology Inc. Preliminary DS70593B-page 85 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 6-1: R/W-0 TRAPR bit 15 R/W-0 EXTR bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 SWR R/W-0 SWDTEN(2) R/W-0 WDTO R/W-0 SLEEP R/W-0 IDLE R/W-1 BOR RCON: RESET CONTROL REGISTER(1) R/W-0 IOPUWR U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 VREGS(3) bit 8 R/W-1 POR bit 0 TRAPR: Trap Reset Flag bit 1 = A Trap Conflict Reset has occurred 0 = A Trap Conflict Reset has not occurred IOPUWR: Illegal Opcode or Uninitialized W Access Reset Flag bit 1 = An illegal opcode detection, an illegal address mode or uninitialized W register used as an Address Pointer caused a Reset 0 = An illegal opcode or uninitialized W Reset has not occurred Unimplemented: Read as `0' VREGS: Voltage Regulator Standby During Sleep bit(3) 1 = Voltage Regulator is active during Sleep mode 0 = Voltage Regulator goes into standby mode during Sleep EXTR: External Reset (MCLR) Pin bit 1 = A Master Clear (pin) Reset has occurred 0 = A Master Clear (pin) Reset has not occurred SWR: Software Reset (Instruction) Flag bit 1 = A RESET instruction has been executed 0 = A RESET instruction has not been executed SWDTEN: Software Enable/Disable of WDT bit(2) 1 = WDT is enabled 0 = WDT is disabled WDTO: Watchdog Timer Time-out Flag bit 1 = WDT time-out has occurred 0 = WDT time-out has not occurred SLEEP: Wake-up from Sleep Flag bit 1 = Device has been in Sleep mode 0 = Device has not been in Sleep mode IDLE: Wake-up from Idle Flag bit 1 = Device was in Idle mode 0 = Device was not in Idle mode BOR: Brown-out Reset Flag bit 1 = A Brown-out Reset has occurred 0 = A Brown-out Reset has not occurred bit 14 bit 13-9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 Note 1: All of the Reset status bits may be set or cleared in software. Setting one of these bits in software does not cause a device Reset. 2: If the FWDTEN Configuration bit is `1' (unprogrammed), the WDT is always enabled, regardless of the SWDTEN bit setting. 3: For dsPIC33FJ256GPX06A/X08A/X10A devices, this bit is unimplemented and reads back programmed value. DS70593B-page 86 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 6-1: bit 0 RCON: RESET CONTROL REGISTER(1) (CONTINUED) POR: Power-on Reset Flag bit 1 = A Power-on Reset has occurred 0 = A Power-on Reset has not occurred Note 1: All of the Reset status bits may be set or cleared in software. Setting one of these bits in software does not cause a device Reset. 2: If the FWDTEN Configuration bit is `1' (unprogrammed), the WDT is always enabled, regardless of the SWDTEN bit setting. 3: For dsPIC33FJ256GPX06A/X08A/X10A devices, this bit is unimplemented and reads back programmed value. 2009 Microchip Technology Inc. Preliminary DS70593B-page 87 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 6-1: RESET FLAG BIT OPERATION Flag Bit TRAPR (RCON<15>) IOPUWR (RCON<14>) EXTR (RCON<7>) SWR (RCON<6>) WDTO (RCON<4>) SLEEP (RCON<3>) IDLE (RCON<2>) BOR (RCON<1>) POR (RCON<0>) Note: Setting Event Trap conflict event Illegal opcode or uninitialized W register access MCLR Reset RESET instruction WDT time-out PWRSAV #SLEEP instruction PWRSAV #IDLE instruction BOR, POR POR Clearing Event POR, BOR POR, BOR POR POR, BOR PWRSAV instruction, POR, BOR POR, BOR POR, BOR -- -- All Reset flag bits may be set or cleared by the user software. 6.1 Clock Source Selection at Reset 6.2 Device Reset Times If clock switching is enabled, the system clock source at device Reset is chosen, as shown in Table 6-2. If clock switching is disabled, the system clock source is always selected according to the oscillator Configuration bits. Refer to Section 9.0 "Oscillator Configuration" for further details. The Reset times for various types of device Reset are summarized in Table 6-3. The system Reset signal, SYSRST, is released after the POR and PWRT delay times expire. The time at which the device actually begins to execute code also depends on the system oscillator delays, which include the Oscillator Start-up Timer (OST) and the PLL lock time. The OST and PLL lock times occur in parallel with the applicable SYSRST delay times. The FSCM delay determines the time at which the FSCM begins to monitor the system clock source after the SYSRST signal is released. TABLE 6-2: OSCILLATOR SELECTION VS TYPE OF RESET (CLOCK SWITCHING ENABLED) Clock Source Determinant Oscillator Configuration bits (FNOSC<2:0>) COSC Control bits (OSCCON<14:12>) Reset Type POR BOR MCLR WDTR SWR DS70593B-page 88 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 6-3: Reset Type POR RESET DELAY TIMES FOR VARIOUS DEVICE RESETS Clock Source EC, FRC, LPRC ECPLL, FRCPLL XT, HS, SOSC XTPLL, HSPLL EC, FRC, LPRC ECPLL, FRCPLL XT, HS, SOSC XTPLL, HSPLL SYSRST Delay TPOR + TSTARTUP + TRST TPOR + TSTARTUP + TRST TPOR + TSTARTUP + TRST TPOR + TSTARTUP + TRST TSTARTUP + TRST TSTARTUP + TRST TSTARTUP + TRST TSTARTUP + TRST System Clock Delay -- TLOCK TOST TOST + TLOCK -- TLOCK TOST TOST + TLOCK FSCM Delay -- TFSCM TFSCM TFSCM -- TFSCM TFSCM TFSCM Notes 1, 2, 3 1, 2, 3, 5, 6 1, 2, 3, 4, 6 1, 2, 3, 4, 5, 6 3 3, 5, 6 3, 4, 6 3, 4, 5, 6 BOR MCLR Any Clock TRST -- -- 3 -- -- 3 WDT Any Clock TRST Software Any Clock TRST -- -- 3 -- -- 3 Illegal Opcode Any Clock TRST -- -- 3 Uninitialized W Any Clock TRST -- -- 3 Trap Conflict Any Clock TRST Note 1: TPOR = Power-on Reset delay (10 s nominal). 2: TSTARTUP = Conditional POR delay of 20 s nominal (if on-chip regulator is enabled) or 64 ms nominal Power-up Timer delay (if regulator is disabled). TSTARTUP is also applied to all returns from powered-down states, including waking from Sleep mode, only if the regulator is enabled. 3: TRST = Internal state Reset time (20 s nominal). 4: TOST = Oscillator Start-up Timer. A 10-bit counter counts 1024 oscillator periods before releasing the oscillator clock to the system. 5: TLOCK = PLL lock time (20 s nominal). 6: TFSCM = Fail-Safe Clock Monitor delay (100 s nominal). 6.2.1 POR AND LONG OSCILLATOR START-UP TIMES 6.2.2.1 FSCM Delay for Crystal and PLL Clock Sources The oscillator start-up circuitry and its associated delay timers are not linked to the device Reset delays that occur at power-up. Some crystal circuits (especially low-frequency crystals) have a relatively long start-up time. Therefore, one or more of the following conditions is possible after SYSRST is released: * The oscillator circuit has not begun to oscillate. * The Oscillator Start-up Timer has not expired (if a crystal oscillator is used). * The PLL has not achieved a lock (if PLL is used). The device will not begin to execute code until a valid clock source has been released to the system. Therefore, the oscillator and PLL start-up delays must be considered when the Reset delay time must be known. When the system clock source is provided by a crystal oscillator and/or the PLL, a small delay, TFSCM, is automatically inserted after the POR and PWRT delay times. The FSCM does not begin to monitor the system clock source until this delay expires. The FSCM delay time is nominally 500 s and provides additional time for the oscillator and/or PLL to stabilize. In most cases, the FSCM delay prevents an oscillator failure trap at a device Reset when the PWRT is disabled. 6.3 Special Function Register Reset States 6.2.2 FAIL-SAFE CLOCK MONITOR (FSCM) AND DEVICE RESETS Most of the Special Function Registers (SFRs) associated with the CPU and peripherals are reset to a particular value at a device Reset. The SFRs are grouped by their peripheral or CPU function and their Reset values are specified in each section of this manual. The Reset value for each SFR does not depend on the type of Reset, with the exception of two registers. The Reset value for the Reset Control register, RCON, depends on the type of device Reset. The Reset value for the Oscillator Control register, OSCCON, depends on the type of Reset and the programmed values of the oscillator Configuration bits in the FOSC Configuration register. If the FSCM is enabled, it begins to monitor the system clock source when SYSRST is released. If a valid clock source is not available at this time, the device automatically switches to the FRC oscillator and the user can switch to the desired crystal oscillator in the Trap Service Routine. 2009 Microchip Technology Inc. Preliminary DS70593B-page 89 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 90 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 7.0 INTERRUPT CONTROLLER 7.1.1 ALTERNATE VECTOR TABLE Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 6. "Interrupts" (DS70184) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The dsPIC33FJXXXGPX06A/X08A/X10A interrupt controller reduces the numerous peripheral interrupt request signals to a single interrupt request signal to the dsPIC33FJXXXGPX06A/X08A/X10A CPU. It has the following features: * Up to eight processor exceptions and software traps * Seven user-selectable priority levels * Interrupt Vector Table (IVT) with up to 118 vectors * A unique vector for each interrupt or exception source * Fixed priority within a specified user priority level * Alternate Interrupt Vector Table (AIVT) for debug support * Fixed interrupt entry and return latencies The Alternate Interrupt Vector Table (AIVT) is located after the IVT, as shown in Figure 7-1. Access to the AIVT is provided by the ALTIVT control bit (INTCON2<15>). If the ALTIVT bit is set, all interrupt and exception processes use the alternate vectors instead of the default vectors. The alternate vectors are organized in the same manner as the default vectors. The AIVT supports debugging by providing a means to switch between an application and a support environment without requiring the interrupt vectors to be reprogrammed. This feature also enables switching between applications for evaluation of different software algorithms at run time. If the AIVT is not needed, the AIVT should be programmed with the same addresses used in the IVT. 7.2 Reset Sequence A device Reset is not a true exception because the interrupt controller is not involved in the Reset process. The dsPIC33FJXXXGPX06A/X08A/X10A device clears its registers in response to a Reset, which forces the PC to zero. The digital signal controller then begins program execution at location 0x000000. The user programs a GOTO instruction at the Reset address which redirects program execution to the appropriate start-up routine. Note: Any unimplemented or unused vector locations in the IVT and AIVT should be programmed with the address of a default interrupt handler routine that contains a RESET instruction. 7.1 Interrupt Vector Table The Interrupt Vector Table is shown in Figure 7-1. The IVT resides in program memory, starting at location 000004h. The IVT contains 126 vectors consisting of eight non-maskable trap vectors plus up to 118 sources of interrupt. In general, each interrupt source has its own vector. Each interrupt vector contains a 24-bit wide address. The value programmed into each interrupt vector location is the starting address of the associated Interrupt Service Routine (ISR). Interrupt vectors are prioritized in terms of their natural priority; this priority is linked to their position in the vector table. All other things being equal, lower addresses have a higher natural priority. For example, the interrupt associated with vector 0 will take priority over interrupts at any other vector address. dsPIC33FJXXXGPX06A/X08A/X10A devices implement up to 67 unique interrupts and five non-maskable traps. These are summarized in Table 7-1 and Table 7-2. 2009 Microchip Technology Inc. Preliminary DS70593B-page 91 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 7-1: dsPIC33FJXXXGPX06A/X08A/X10A INTERRUPT VECTOR TABLE Reset - GOTO Instruction Reset - GOTO Address Reserved Oscillator Fail Trap Vector Address Error Trap Vector Stack Error Trap Vector Math Error Trap Vector DMA Error Trap Vector Reserved Reserved Interrupt Vector 0 Interrupt Vector 1 ~ ~ ~ Interrupt Vector 52 Interrupt Vector 53 Interrupt Vector 54 ~ ~ ~ Interrupt Vector 116 Interrupt Vector 117 Reserved Reserved Reserved Oscillator Fail Trap Vector Address Error Trap Vector Stack Error Trap Vector Math Error Trap Vector DMA Error Trap Vector Reserved Reserved Interrupt Vector 0 Interrupt Vector 1 ~ ~ ~ Interrupt Vector 52 Interrupt Vector 53 Interrupt Vector 54 ~ ~ ~ Interrupt Vector 116 Interrupt Vector 117 Start of Code 0x000000 0x000002 0x000004 0x000014 Decreasing Natural Order Priority 0x00007C 0x00007E 0x000080 Interrupt Vector Table (IVT)(1) 0x0000FC 0x0000FE 0x000100 0x000102 0x000114 Alternate Interrupt Vector Table (AIVT)(1) 0x00017C 0x00017E 0x000180 0x0001FE 0x000200 Note 1: See Table 7-1 for the list of implemented interrupt vectors. DS70593B-page 92 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 7-1: Vector Number 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 INTERRUPT VECTORS Interrupt Request (IRQ) Number 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 IVT Address 0x000014 0x000016 0x000018 0x00001A 0x00001C 0x00001E 0x000020 0x000022 0x000024 0x000026 0x000028 0x00002A 0x00002C 0x00002E 0x000030 0x000032 0x000034 0x000036 0x000038 0x00003A 0x00003C 0x00003E 0x000040 0x000042 0x000044 0x000046 0x000048 0x00004A 0x00004C 0x00004E 0x000050 0x000052 0x000054 0x000056 0x000058 0x00005A 0x00005C 0x00005E 0x000060 0x000062 0x000064 0x000066 0x000068 0x00006A 0x00006C 0x00006E AIVT Address 0x000114 0x000116 0x000118 0x00011A 0x00011C 0x00011E 0x000120 0x000122 0x000124 0x000126 0x000128 0x00012A 0x00012C 0x00012E 0x000130 0x000132 0x000134 0x000136 0x000138 0x00013A 0x00013C 0x00013E 0x000140 0x000142 0x000144 0x000146 0x000148 0x00014A 0x00014C 0x00014E 0x000150 0x000152 0x000154 0x000156 0x000158 0x00015A 0x00015C 0x00015E 0x000160 0x000162 0x000164 0x000166 0x000168 0x00016A 0x00016C 0x00016E Interrupt Source INT0 - External Interrupt 0 IC1 - Input Compare 1 OC1 - Output Compare 1 T1 - Timer1 DMA0 - DMA Channel 0 IC2 - Input Capture 2 OC2 - Output Compare 2 T2 - Timer2 T3 - Timer3 SPI1E - SPI1 Error SPI1 - SPI1 Transfer Done U1RX - UART1 Receiver U1TX - UART1 Transmitter ADC1 - ADC 1 DMA1 - DMA Channel 1 Reserved SI2C1 - I2C1 Slave Events MI2C1 - I2C1 Master Events Reserved Change Notification Interrupt INT1 - External Interrupt 1 ADC2 - ADC 2 IC7 - Input Capture 7 IC8 - Input Capture 8 DMA2 - DMA Channel 2 OC3 - Output Compare 3 OC4 - Output Compare 4 T4 - Timer4 T5 - Timer5 INT2 - External Interrupt 2 U2RX - UART2 Receiver U2TX - UART2 Transmitter SPI2E - SPI2 Error SPI1 - SPI1 Transfer Done C1RX - ECAN1 Receive Data Ready C1 - ECAN1 Event DMA3 - DMA Channel 3 IC3 - Input Capture 3 IC4 - Input Capture 4 IC5 - Input Capture 5 IC6 - Input Capture 6 OC5 - Output Compare 5 OC6 - Output Compare 6 OC7 - Output Compare 7 OC8 - Output Compare 8 Reserved 2009 Microchip Technology Inc. Preliminary DS70593B-page 93 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 7-1: Vector Number 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80-125 INTERRUPT VECTORS (CONTINUED) Interrupt Request (IRQ) Number 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72-117 IVT Address AIVT Address Interrupt Source DMA4 - DMA Channel 4 T6 - Timer6 T7 - Timer7 SI2C2 - I2C2 Slave Events MI2C2 - I2C2 Master Events T8 - Timer8 T9 - Timer9 INT3 - External Interrupt 3 INT4 - External Interrupt 4 C2RX - ECAN2 Receive Data Ready C2 - ECAN2 Event Reserved Reserved DCIE - DCI Error DCID - DCI Transfer Done DMA5 - DMA Channel 5 Reserved Reserved Reserved U1E - UART1 Error U2E - UART2 Error Reserved DMA6 - DMA Channel 6 DMA7 - DMA Channel 7 C1TX - ECAN1 Transmit Data Request C2TX - ECAN2 Transmit Data Request Reserved 0x000070 0x000170 0x000072 0x000172 0x000074 0x000174 0x000076 0x000176 0x000078 0x000178 0x00007A 0x00017A 0x00007C 0x00017C 0x00007E 0x00017E 0x000080 0x000180 0x000082 0x000182 0x000084 0x000184 0x000086 0x000186 0x000088 0x000188 0x00008A 0x00018A 0x00008C 0x00018C 0x00008E 0x00018E 0x000090 0x000190 0x000092 0x000192 0x000094 0x000194 0x000096 0x000196 0x000098 0x000198 0x00009A 0x00019A 0x00009C 0x00019C 0x00009E 0x00019E 0x0000A0 0x0001A0 0x0000A2 0x0001A2 0x0000A4-0x0000 0x0001A4-0x0001 FE FE TABLE 7-2: 0 1 2 3 4 5 6 7 TRAP VECTORS IVT Address 0x000004 0x000006 0x000008 0x00000A 0x00000C 0x00000E 0x000010 0x000012 AIVT Address 0x000104 0x000106 0x000108 0x00010A 0x00010C 0x00010E 0x000110 0x000112 Trap Source Reserved Oscillator Failure Address Error Stack Error Math Error DMA Error Trap Reserved Reserved Vector Number DS70593B-page 94 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 7.3 Interrupt Control and Status Registers The IPC registers are used to set the interrupt priority level for each source of interrupt. Each user interrupt source can be assigned to one of eight priority levels. The INTTREG register contains the associated interrupt vector number and the new CPU interrupt priority level, which are latched into vector number (VECNUM<6:0>) and Interrupt level (ILR<3:0>) bit fields in the INTTREG register. The new interrupt priority level is the priority of the pending interrupt. The interrupt sources are assigned to the IFSx, IECx and IPCx registers in the same sequence that they are listed in Table 7-1. For example, the INT0 (External Interrupt 0) is shown as having vector number 8 and a natural order priority of 0. Thus, the INT0IF bit is found in IFS0<0>, the INT0IE bit in IEC0<0>, and the INT0IP bits in the first position of IPC0 (IPC0<2:0>). Although they are not specifically part of the interrupt control hardware, two of the CPU Control registers contain bits that control interrupt functionality. The CPU STATUS register, SR, contains the IPL<2:0> bits (SR<7:5>). These bits indicate the current CPU interrupt priority level. The user can change the current CPU priority level by writing to the IPL bits. The CORCON register contains the IPL3 bit which, together with IPL<2:0>, also indicates the current CPU priority level. IPL3 is a read-only bit so that trap events cannot be masked by the user software. All Interrupt registers are described in Register 7-1 through Register 7-32, in the following pages. dsPIC33FJXXXGPX06A/X08A/X10A devices implement a total of 30 registers for the interrupt controller: * * * * * * INTCON1 INTCON2 IFS0 through IFS4 IEC0 through IEC4 IPC0 through IPC17 INTTREG Global interrupt control functions are controlled from INTCON1 and INTCON2. INTCON1 contains the Interrupt Nesting Disable (NSTDIS) bit as well as the control and status flags for the processor trap sources. The INTCON2 register controls the external interrupt request signal behavior and the use of the Alternate Interrupt Vector Table. The IFS registers maintain all of the interrupt request flags. Each source of interrupt has a Status bit, which is set by the respective peripherals or external signal and is cleared via software. The IEC registers maintain all of the interrupt enable bits. These control bits are used to individually enable interrupts from the peripherals or external signals. 2009 Microchip Technology Inc. Preliminary DS70593B-page 95 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-1: R-0 OA bit 15 R/W-0(3) IPL2 bit 7 Legend: C = Clear only bit S = Set only bit `1' = Bit is set bit 7-5 R = Readable bit W = Writable bit `0' = Bit is cleared U = Unimplemented bit, read as `0' -n = Value at POR x = Bit is unknown (2) SR: CPU STATUS REGISTER(1) R-0 OB R/C-0 SA R/C-0 SB R-0 OAB R/C-0 SAB R -0 DA R/W-0 DC bit 8 R/W-0(3) IPL1 (2) R/W-0(3) IPL0(2) R-0 RA R/W-0 N R/W-0 OV R/W-0 Z R/W-0 C bit 0 IPL<2:0>: CPU Interrupt Priority Level Status bits(2) 111 = CPU Interrupt Priority Level is 7 (15), user interrupts disabled 110 = CPU Interrupt Priority Level is 6 (14) 101 = CPU Interrupt Priority Level is 5 (13) 100 = CPU Interrupt Priority Level is 4 (12) 011 = CPU Interrupt Priority Level is 3 (11) 010 = CPU Interrupt Priority Level is 2 (10) 001 = CPU Interrupt Priority Level is 1 (9) 000 = CPU Interrupt Priority Level is 0 (8) Note 1: For complete register details, see Register 3-1: "SR: CPU STATUS REGISTER". 2: The IPL<2:0> bits are concatenated with the IPL<3> bit (CORCON<3>) to form the CPU Interrupt Priority Level. The value in parentheses indicates the IPL if IPL<3> = 1. User interrupts are disabled when IPL<3> = 1. 3: The IPL<2:0> Status bits are read-only when NSTDIS (INTCON1<15>) = 1. REGISTER 7-2: U-0 -- bit 15 R/W-0 SATA bit 7 Legend: R = Readable bit 0' = Bit is cleared bit 3 CORCON: CORE CONTROL REGISTER(1) U-0 -- U-0 -- R/W-0 US R/W-0 EDT R-0 R-0 DL<2:0> R-0 bit 8 R/W-0 SATB R/W-1 SATDW R/W-0 ACCSAT R/C-0 IPL3(2) R/W-0 PSV R/W-0 RND R/W-0 IF bit 0 C = Clear only bit W = Writable bit `x = Bit is unknown -n = Value at POR `1' = Bit is set U = Unimplemented bit, read as `0' IPL3: CPU Interrupt Priority Level Status bit 3(2) 1 = CPU interrupt priority level is greater than 7 0 = CPU interrupt priority level is 7 or less Note 1: For complete register details, see Register 3-2: "CORCON: CORE CONTROL REGISTER". 2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU Interrupt Priority Level. DS70593B-page 96 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-3: R/W-0 NSTDIS bit 15 R/W-0 SFTACERR bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 DIV0ERR R/W-0 DMACERR R/W-0 MATHERR R/W-0 ADDRERR R/W-0 STKERR R/W-0 OSCFAIL U-0 -- bit 0 INTCON1: INTERRUPT CONTROL REGISTER 1 R/W-0 OVAERR R/W-0 OVBERR R/W-0 COVAERR R/W-0 COVBERR R/W-0 OVATE R/W-0 OVBTE R/W-0 COVTE bit 8 NSTDIS: Interrupt Nesting Disable bit 1 = Interrupt nesting is disabled 0 = Interrupt nesting is enabled OVAERR: Accumulator A Overflow Trap Flag bit 1 = Trap was caused by overflow of Accumulator A 0 = Trap was not caused by overflow of Accumulator A OVBERR: Accumulator B Overflow Trap Flag bit 1 = Trap was caused by overflow of Accumulator B 0 = Trap was not caused by overflow of Accumulator B COVAERR: Accumulator A Catastrophic Overflow Trap Flag bit 1 = Trap was caused by catastrophic overflow of Accumulator A 0 = Trap was not caused by catastrophic overflow of Accumulator A COVBERR: Accumulator B Catastrophic Overflow Trap Flag bit 1 = Trap was caused by catastrophic overflow of Accumulator B 0 = Trap was not caused by catastrophic overflow of Accumulator B OVATE: Accumulator A Overflow Trap Enable bit 1 = Trap overflow of Accumulator A 0 = Trap disabled OVBTE: Accumulator B Overflow Trap Enable bit 1 = Trap overflow of Accumulator B 0 = Trap disabled COVTE: Catastrophic Overflow Trap Enable bit 1 = Trap on catastrophic overflow of Accumulator A or B enabled 0 = Trap disabled SFTACERR: Shift Accumulator Error Status bit 1 = Math error trap was caused by an invalid accumulator shift 0 = Math error trap was not caused by an invalid accumulator shift DIV0ERR: Arithmetic Error Status bit 1 = Math error trap was caused by a divide by zero 0 = Math error trap was not caused by a divide by zero DMACERR: DMA Controller Error Status bit 1 = DMA controller error trap has occurred 0 = DMA controller error trap has not occurred MATHERR: Arithmetic Error Status bit 1 = Math error trap has occurred 0 = Math error trap has not occurred bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 2009 Microchip Technology Inc. Preliminary DS70593B-page 97 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-3: bit 3 INTCON1: INTERRUPT CONTROL REGISTER 1 (CONTINUED) ADDRERR: Address Error Trap Status bit 1 = Address error trap has occurred 0 = Address error trap has not occurred STKERR: Stack Error Trap Status bit 1 = Stack error trap has occurred 0 = Stack error trap has not occurred OSCFAIL: Oscillator Failure Trap Status bit 1 = Oscillator failure trap has occurred 0 = Oscillator failure trap has not occurred Unimplemented: Read as `0' bit 2 bit 1 bit 0 DS70593B-page 98 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-4: R/W-0 ALTIVT bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R/W-0 INT4EP R/W-0 INT3EP R/W-0 INT2EP R/W-0 INT1EP INTCON2: INTERRUPT CONTROL REGISTER 2 R-0 DISI U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 INT0EP bit 0 ALTIVT: Enable Alternate Interrupt Vector Table bit 1 = Use alternate vector table 0 = Use standard (default) vector table DISI: DISI Instruction Status bit 1 = DISI instruction is active 0 = DISI instruction is not active Unimplemented: Read as `0' INT4EP: External Interrupt 4 Edge Detect Polarity Select bit 1 = Interrupt on negative edge 0 = Interrupt on positive edge INT3EP: External Interrupt 3 Edge Detect Polarity Select bit 1 = Interrupt on negative edge 0 = Interrupt on positive edge INT2EP: External Interrupt 2 Edge Detect Polarity Select bit 1 = Interrupt on negative edge 0 = Interrupt on positive edge INT1EP: External Interrupt 1 Edge Detect Polarity Select bit 1 = Interrupt on negative edge 0 = Interrupt on positive edge INT0EP: External Interrupt 0 Edge Detect Polarity Select bit 1 = Interrupt on negative edge 0 = Interrupt on positive edge bit 14 bit 13-5 bit 4 bit 3 bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 99 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-5: U-0 -- bit 15 R/W-0 T2IF bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 OC2IF R/W-0 IC2IF R/W-0 DMA01IF R/W-0 T1IF R/W-0 OC1IF R/W-0 IC1IF IFS0: INTERRUPT FLAG STATUS REGISTER 0 R/W-0 DMA1IF R/W-0 AD1IF R/W-0 U1TXIF R/W-0 U1RXIF R/W-0 SPI1IF R/W-0 SPI1EIF R/W-0 T3IF bit 8 R/W-0 INT0IF bit 0 Unimplemented: Read as `0' DMA1IF: DMA Channel 1 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred AD1IF: ADC1 Conversion Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred U1TXIF: UART1 Transmitter Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred U1RXIF: UART1 Receiver Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SPI1IF: SPI1 Event Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SPI1EIF: SPI1 Fault Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T3IF: Timer3 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T2IF: Timer2 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC2IF: Output Compare Channel 2 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC2IF: Input Capture Channel 2 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA01IF: DMA Channel 0 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T1IF: Timer1 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 DS70593B-page 100 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-5: bit 2 IFS0: INTERRUPT FLAG STATUS REGISTER 0 (CONTINUED) OC1IF: Output Compare Channel 1 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC1IF: Input Capture Channel 1 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred INT0IF: External Interrupt 0 Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 101 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-6: R/W-0 U2TXIF bit 15 R/W-0 IC8IF bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 IC7IF R/W-0 AD2IF R/W-0 INT1IF R/W-0 CNIF U-0 -- R/W-0 MI2C1IF IFS1: INTERRUPT FLAG STATUS REGISTER 1 R/W-0 U2RXIF R/W-0 INT2IF R/W-0 T5IF R/W-0 T4IF R/W-0 OC4IF R/W-0 OC3IF R/W-0 DMA21IF bit 8 R/W-0 SI2C1IF bit 0 U2TXIF: UART2 Transmitter Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred U2RXIF: UART2 Receiver Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred INT2IF: External Interrupt 2 Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T5IF: Timer5 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T4IF: Timer4 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC4IF: Output Compare Channel 4 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC3IF: Output Compare Channel 3 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA21IF: DMA Channel 2 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC8IF: Input Capture Channel 8 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC7IF: Input Capture Channel 7 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred AD2IF: ADC2 Conversion Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred INT1IF: External Interrupt 1 Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 DS70593B-page 102 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-6: bit 3 IFS1: INTERRUPT FLAG STATUS REGISTER 1 (CONTINUED) CNIF: Input Change Notification Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred Unimplemented: Read as `0' MI2C1IF: I2C1 Master Events Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SI2C1IF: I2C1 Slave Events Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 103 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-7: R/W-0 T6IF bit 15 R/W-0 IC5IF bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 IC4IF R/W-0 IC3IF R/W-0 DMA3IF R/W-0 C1IF R/W-0 C1RXIF R/W-0 SPI2IF IFS2: INTERRUPT FLAG STATUS REGISTER 2 R/W-0 DMA4IF U-0 -- R/W-0 OC8IF R/W-0 OC7IF R/W-0 OC6IF R/W-0 OC5IF R/W-0 IC6IF bit 8 R/W-0 SPI2EIF bit 0 T6IF: Timer6 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA4IF: DMA Channel 4 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred Unimplemented: Read as `0' OC8IF: Output Compare Channel 8 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC7IF: Output Compare Channel 7 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC6IF: Output Compare Channel 6 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred OC5IF: Output Compare Channel 5 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC6IF: Input Capture Channel 6 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC5IF: Input Capture Channel 5 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC4IF: Input Capture Channel 4 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred IC3IF: Input Capture Channel 3 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA3IF: DMA Channel 3 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred C1IF: ECAN1 Event Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 DS70593B-page 104 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-7: bit 2 IFS2: INTERRUPT FLAG STATUS REGISTER 2 (CONTINUED) C1RXIF: ECAN1 Receive Data Ready Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SPI2IF: SPI2 Event Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SPI2EIF: SPI2 Error Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 105 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-8: U-0 -- bit 15 R/W-0 C2RXIF bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 INT4IF R/W-0 INT3IF R/W-0 T9IF R/W-0 T8IF R/W-0 MI2C2IF R/W-0 SI2C2IF IFS3: INTERRUPT FLAG STATUS REGISTER 3 U-0 -- R/W-0 DMA5IF R/W-0 DCIIF R/W-0 DCIEIF U-0 -- U-0 -- R/W-0 C2IF bit 8 R/W-0 T7IF bit 0 Unimplemented: Read as `0' DMA5IF: DMA Channel 5 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DCIIF: DCI Event Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DCIEIF: DCI Error Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred Unimplemented: Read as `0' C2IF: ECAN2 Event Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred C2RXIF: ECAN2 Receive Data Ready Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred INT4IF: External Interrupt 4 Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred INT3IF: External Interrupt 3 Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T9IF: Timer9 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T8IF: Timer8 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred MI2C2IF: I2C2 Master Events Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred SI2C2IF: I2C2 Slave Events Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred T7IF: Timer7 Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred bit 12 bit 11 bit 10-9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 DS70593B-page 106 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-9: U-0 -- bit 15 R/W-0 C2TXIF bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 C1TXIF R/W-0 DMA7IF R/W-0 DMA6IF U-0 -- R/W-0 U2EIF R/W-0 U1EIF U-0 -- bit 0 IFS4: INTERRUPT FLAG STATUS REGISTER 4 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 Unimplemented: Read as `0' C2TXIF: ECAN2 Transmit Data Request Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred C1TXIF: ECAN1 Transmit Data Request Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA7IF: DMA Channel 7 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred DMA6IF: DMA Channel 6 Data Transfer Complete Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred Unimplemented: Read as `0' U2EIF: UART2 Error Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred U1EIF: UART1 Error Interrupt Flag Status bit 1 = Interrupt request has occurred 0 = Interrupt request has not occurred Unimplemented: Read as `0' bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 107 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-10: U-0 -- bit 15 R/W-0 T2IE bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 OC2IE R/W-0 IC2IE R/W-0 DMA0IE R/W-0 T1IE R/W-0 OC1IE R/W-0 IC1IE IEC0: INTERRUPT ENABLE CONTROL REGISTER 0 R/W-0 R/W-0 AD1IE R/W-0 U1TXIE R/W-0 U1RXIE R/W-0 SPI1IE R/W-0 SPI1EIE R/W-0 T3IE bit 8 R/W-0 INT0IE bit 0 DMA1IE Unimplemented: Read as `0' DMA1IE: DMA Channel 1 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled AD1IE: ADC1 Conversion Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled U1TXIE: UART1 Transmitter Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled U1RXIE: UART1 Receiver Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SPI1IE: SPI1 Event Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SPI1EIE: SPI1 Error Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T3IE: Timer3 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T2IE: Timer2 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC2IE: Output Compare Channel 2 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC2IE: Input Capture Channel 2 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA0IE: DMA Channel 0 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T1IE: Timer1 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 DS70593B-page 108 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-10: bit 2 IEC0: INTERRUPT ENABLE CONTROL REGISTER 0 (CONTINUED) OC1IE: Output Compare Channel 1 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC1IE: Input Capture Channel 1 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled INT0IE: External Interrupt 0 Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 109 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-11: R/W-0 U2TXIE bit 15 R/W-0 IC8IE bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 IC7IE R/W-0 AD2IE R/W-0 INT1IE R/W-0 CNIE U-0 -- R/W-0 MI2C1IE IEC1: INTERRUPT ENABLE CONTROL REGISTER 1 R/W-0 R/W-0 INT2IE R/W-0 T5IE R/W-0 T4IE R/W-0 OC4IE R/W-0 OC3IE R/W-0 DMA2IE bit 8 R/W-0 SI2C1IE bit 0 U2RXIE U2TXIE: UART2 Transmitter Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled U2RXIE: UART2 Receiver Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled INT2IE: External Interrupt 2 Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T5IE: Timer5 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T4IE: Timer4 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC4IE: Output Compare Channel 4 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC3IE: Output Compare Channel 3 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA2IE: DMA Channel 2 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC8IE: Input Capture Channel 8 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC7IE: Input Capture Channel 7 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled AD2IE: ADC2 Conversion Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled INT1IE: External Interrupt 1 Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 DS70593B-page 110 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-11: bit 3 IEC1: INTERRUPT ENABLE CONTROL REGISTER 1 (CONTINUED) CNIE: Input Change Notification Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled Unimplemented: Read as `0' MI2C1IE: I2C1 Master Events Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SI2C1IE: I2C1 Slave Events Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 111 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-12: R/W-0 T6IE bit 15 R/W-0 IC5IE bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 IC4IE R/W-0 IC3IE R/W-0 DMA3IE R/W-0 C1IE R/W-0 C1RXIE R/W-0 SPI2IE IEC2: INTERRUPT ENABLE CONTROL REGISTER 2 R/W-0 U-0 -- R/W-0 OC8IE R/W-0 OC7IE R/W-0 OC6IE R/W-0 OC5IE R/W-0 IC6IE bit 8 R/W-0 SPI2EIE bit 0 DMA4IE T6IE: Timer6 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA4IE: DMA Channel 4 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled Unimplemented: Read as `0' OC8IE: Output Compare Channel 8 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC7IE: Output Compare Channel 7 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC6IE: Output Compare Channel 6 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled OC5IE: Output Compare Channel 5 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC6IE: Input Capture Channel 6 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC5IE: Input Capture Channel 5 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC4IE: Input Capture Channel 4 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled IC3IE: Input Capture Channel 3 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA3IE: DMA Channel 3 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled C1IE: ECAN1 Event Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 DS70593B-page 112 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-12: bit 2 IEC2: INTERRUPT ENABLE CONTROL REGISTER 2 (CONTINUED) C1RXIE: ECAN1 Receive Data Ready Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SPI2IE: SPI2 Event Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SPI2EIE: SPI2 Error Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 113 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-13: U-0 -- bit 15 R/W-0 C2RXIE bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 INT4IE R/W-0 INT3IE R/W-0 T9IE R/W-0 T8IE R/W-0 MI2C2IE R/W-0 SI2C2IE IEC3: INTERRUPT ENABLE CONTROL REGISTER 3 U-0 -- R/W-0 DMA5IE R/W-0 DCIIE R/W-0 DCIEIE U-0 -- U-0 -- R/W-0 C2IE bit 8 R/W-0 T7IE bit 0 Unimplemented: Read as `0' DMA5IE: DMA Channel 5 Data Transfer Complete Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DCIIE: DCI Event Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DCIEIE: DCI Error Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled Unimplemented: Read as `0' C2IE: ECAN2 Event Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled C2RXIE: ECAN2 Receive Data Ready Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled INT4IE: External Interrupt 4 Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled INT3IE: External Interrupt 3 Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T9IE: Timer9 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T8IE: Timer8 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled MI2C2IE: I2C2 Master Events Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled SI2C2IE: I2C2 Slave Events Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled T7IE: Timer7 Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled bit 12 bit 11 bit 10-9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 DS70593B-page 114 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-14: U-0 -- bit 15 R/W-0 C2TXIE bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 C1TXIE R/W-0 DMA7IE R/W-0 DMA6IE U-0 -- R/W-0 U2EIE R/W-0 U1EIE U-0 -- bit 0 IEC4: INTERRUPT ENABLE CONTROL REGISTER 4 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 Unimplemented: Read as `0' C2TXIE: ECAN2 Transmit Data Request Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled C1TXIE: ECAN1 Transmit Data Request Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA7IE: DMA Channel 7 Data Transfer Complete Enable Status bit 1 = Interrupt request enabled 0 = Interrupt request not enabled DMA6IE: DMA Channel 6 Data Transfer Complete Enable Status bit 1 = Interrupt request enabled 0 = Interrupt request not enabled Unimplemented: Read as `0' U2EIE: UART2 Error Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled U1EIE: UART1 Error Interrupt Enable bit 1 = Interrupt request enabled 0 = Interrupt request not enabled Unimplemented: Read as `0' bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 115 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-15: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 IC1IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 INT0IP<2:0> bit 0 IPC0: INTERRUPT PRIORITY CONTROL REGISTER 0 R/W-1 R/W-0 T1IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 OC1IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' T1IP<2:0>: Timer1 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC1IP<2:0>: Output Compare Channel 1 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC1IP<2:0>: Input Capture Channel 1 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' INT0IP<2:0>: External Interrupt 0 Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 116 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-16: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 IC2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DMA0IP<2:0> bit 0 IPC1: INTERRUPT PRIORITY CONTROL REGISTER 1 R/W-1 R/W-0 T2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 OC2IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' T2IP<2:0>: Timer2 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC2IP<2:0>: Output Compare Channel 2 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC2IP<2:0>: Input Capture Channel 2 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA0IP<2:0>: DMA Channel 0 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 117 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-17: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 SPI1EIP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 T3IP<2:0> bit 0 IPC2: INTERRUPT PRIORITY CONTROL REGISTER 2 R/W-1 R/W-0 U1RXIP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 SPI1IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' U1RXIP<2:0>: UART1 Receiver Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SPI1IP<2:0>: SPI1 Event Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SPI1EIP<2:0>: SPI1 Error Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' T3IP<2:0>: Timer3 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 118 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-18: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-11 bit 10-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 AD1IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 U1TXIP<2:0> bit 0 IPC3: INTERRUPT PRIORITY CONTROL REGISTER 3 U-0 -- U-0 -- U-0 -- U-0 -- R/W-1 R/W-0 DMA1IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' DMA1IP<2:0>: DMA Channel 1 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' AD1IP<2:0>: ADC1 Conversion Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' U1TXIP<2:0>: UART1 Transmitter Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 119 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-19: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 MI2C1IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 SI2C1IP<2:0> bit 0 IPC4: INTERRUPT PRIORITY CONTROL REGISTER 4 R/W-1 R/W-0 CNIP<2:0> R/W-0 U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 Unimplemented: Read as `0' CNIP<2:0>: Change Notification Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' MI2C1IP<2:0>: I2C1 Master Events Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SI2C1IP<2:0>: I2C1 Slave Events Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11-7 bit 6-4 bit 3 bit 2-0 DS70593B-page 120 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-20: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 AD2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 INT1IP<2:0> bit 0 IPC5: INTERRUPT PRIORITY CONTROL REGISTER 5 R/W-1 R/W-0 IC8IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 IC7IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' IC8IP<2:0>: Input Capture Channel 8 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC7IP<2:0>: Input Capture Channel 7 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' AD2IP<2:0>: ADC2 Conversion Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' INT1IP<2:0>: External Interrupt 1 Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 121 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-21: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 OC3IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DMA2IP<2:0> bit 0 IPC6: INTERRUPT PRIORITY CONTROL REGISTER 6 R/W-1 R/W-0 T4IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 OC4IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' T4IP<2:0>: Timer4 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC4IP<2:0>: Output Compare Channel 4 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC3IP<2:0>: Output Compare Channel 3 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA2IP<2:0>: DMA Channel 2 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 122 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-22: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 INT2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 T5IP<2:0> bit 0 IPC7: INTERRUPT PRIORITY CONTROL REGISTER 7 R/W-1 R/W-0 U2TXIP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 U2RXIP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' U2TXIP<2:0>: UART2 Transmitter Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' U2RXIP<2:0>: UART2 Receiver Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' INT2IP<2:0>: External Interrupt 2 Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' T5IP<2:0>: Timer5 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 123 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-23: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 SPI2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 SPI2EIP<2:0> bit 0 IPC8: INTERRUPT PRIORITY CONTROL REGISTER 8 R/W-1 R/W-0 C1IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 C1RXIP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' C1IP<2:0>: ECAN1 Event Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' C1RXIP<2:0>: ECAN1 Receive Data Ready Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SPI2IP<2:0>: SPI2 Event Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SPI2EIP<2:0>: SPI2 Error Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 124 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-24: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 IC3IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DMA3IP<2:0> bit 0 IPC9: INTERRUPT PRIORITY CONTROL REGISTER 9 R/W-1 R/W-0 IC5IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 IC4IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' IC5IP<2:0>: Input Capture Channel 5 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC4IP<2:0>: Input Capture Channel 4 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC3IP<2:0>: Input Capture Channel 3 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA3IP<2:0>: DMA Channel 3 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 125 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-25: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 OC5IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 IC6IP<2:0> bit 0 IPC10: INTERRUPT PRIORITY CONTROL REGISTER 10 R/W-1 R/W-0 OC7IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 OC6IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' OC7IP<2:0>: Output Compare Channel 7 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC6IP<2:0>: Output Compare Channel 6 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC5IP<2:0>: Output Compare Channel 5 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' IC6IP<2:0>: Input Capture Channel 6 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 126 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-26: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- R/W-1 R/W-0 OC8IP<2:0> bit 0 IPC11: INTERRUPT PRIORITY CONTROL REGISTER 11 R/W-1 R/W-0 T6IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DMA4IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' T6IP<2:0>: Timer6 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA4IP<2:0>: DMA Channel 4 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' OC8IP<2:0>: Output Compare Channel 8 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7-3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 127 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-27: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 SI2C2IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 T7IP<2:0> bit 0 IPC12: INTERRUPT PRIORITY CONTROL REGISTER 12 R/W-1 R/W-0 T8IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 MI2C2IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' T8IP<2:0>: Timer8 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' MI2C2IP<2:0>: I2C2 Master Events Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' SI2C2IP<2:0>: I2C2 Slave Events Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' T7IP<2:0>: Timer7 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 DS70593B-page 128 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-28: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 INT3IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 T9IP<2:0> bit 0 IPC13: INTERRUPT PRIORITY CONTROL REGISTER 13 R/W-1 R/W-0 C2RXIP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 INT4IP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' C2RXIP<2:0>: ECAN2 Receive Data Ready Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' INT4IP<2:0>: External Interrupt 4 Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' INT3IP<2:0>: External Interrupt 3 Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' T9IP<2:0>: Timer9 Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 129 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-29: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- R/W-1 R/W-0 C2IP<2:0> bit 0 IPC14: INTERRUPT PRIORITY CONTROL REGISTER 14 R/W-1 R/W-0 DCIEIP<2:0> R/W-0 U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 Unimplemented: Read as `0' DCIEIP<2:0>: DCI Error Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' C2IP<2:0>: ECAN2 Event Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11-3 bit 2-0 DS70593B-page 130 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-30: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-7 bit 6-4 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 DMA5IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DCIIP<2:0> bit 0 IPC15: INTERRUPT PRIORITY CONTROL REGISTER 15 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 Unimplemented: Read as `0' DMA5IP<2:0>: DMA Channel 5 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DCIIP<2:0>: DCI Event Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 131 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-31: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-11 bit 10-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 U1EIP<2:0> R/W-0 U-0 -- U-0 -- U-0 -- U-0 -- bit 0 IPC16: INTERRUPT PRIORITY CONTROL REGISTER 16 U-0 -- U-0 -- U-0 -- U-0 -- R/W-1 R/W-0 U2EIP<2:0> bit 8 R/W-0 Unimplemented: Read as `0' U2EIP<2:0>: UART2 Error Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' U1EIP<2:0>: UART1 Error Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' bit 7 bit 6-4 bit 3-0 DS70593B-page 132 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-32: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 R/W-0 DMA7IP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 DMA6IP<2:0> bit 0 IPC17: INTERRUPT PRIORITY CONTROL REGISTER 17 R/W-1 R/W-0 C2TXIP<2:0> R/W-0 U-0 -- R/W-1 R/W-0 C1TXIP<2:0> bit 8 R/W-0 R/W-0 Unimplemented: Read as `0' C2TXIP<2:0>: ECAN2 Transmit Data Request Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' C1TXIP<2:0>: ECAN1 Transmit Data Request Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA7IP<2:0>: DMA Channel 7 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled Unimplemented: Read as `0' DMA6IP<2:0>: DMA Channel 6 Data Transfer Complete Interrupt Priority bits 111 = Interrupt is priority 7 (highest priority interrupt) * * * 001 = Interrupt is priority 1 000 = Interrupt source is disabled bit 11 bit 10-8 bit 7 bit 6-4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 133 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 7-33: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-0 R-0 R-0 R-0 VECNUM<6:0> bit 0 R-0 R-0 R-0 INTTREG: INTERRUPT CONTROL AND STATUS REGISTER U-0 -- U-0 -- U-0 -- R-0 R-0 ILR<3:0> bit 8 R-0 R-0 Unimplemented: Read as `0' ILR<3:0>: New CPU Interrupt Priority Level bits 1111 = CPU Interrupt Priority Level is 15 * * * 0001 = CPU Interrupt Priority Level is 1 0000 = CPU Interrupt Priority Level is 0 Unimplemented: Read as `0' VECNUM<6:0>: Vector Number of Pending Interrupt bits 0111111 = Interrupt Vector pending is number 135 * * * 0000001 = Interrupt Vector pending is number 9 0000000 = Interrupt Vector pending is number 8 bit 7 bit 6-0 DS70593B-page 134 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 7.4 7.4.1 1. 2. Interrupt Setup Procedures INITIALIZATION 7.4.3 TRAP SERVICE ROUTINE To configure an interrupt source: Set the NSTDIS bit (INTCON1<15>) if nested interrupts are not desired. Select the user-assigned priority level for the interrupt source by writing the control bits in the appropriate IPCx register. The priority level will depend on the specific application and type of interrupt source. If multiple priority levels are not desired, the IPCx register control bits for all enabled interrupt sources may be programmed to the same non-zero value. Note: At a device Reset, the IPCx registers are initialized, such that all user interrupt sources are assigned to priority level 4. A Trap Service Routine (TSR) is coded like an ISR, except that the appropriate trap status flag in the INTCON1 register must be cleared to avoid re-entry into the TSR. 7.4.4 INTERRUPT DISABLE All user interrupts can be disabled using the following procedure: 1. 2. Push the current SR value onto the software stack using the PUSH instruction. Force the CPU to priority level 7 by inclusive ORing the value OEh with SRL. To enable user interrupts, the POP instruction may be used to restore the previous SR value. Note that only user interrupts with a priority level of 7 or less can be disabled. Trap sources (level 8-level 15) cannot be disabled. The DISI instruction provides a convenient way to disable interrupts of priority levels 1-6 for a fixed period of time. Level 7 interrupt sources are not disabled by the DISI instruction. 3. 4. Clear the interrupt flag status bit associated with the peripheral in the associated IFSx register. Enable the interrupt source by setting the interrupt enable control bit associated with the source in the appropriate IECx register. 7.4.2 INTERRUPT SERVICE ROUTINE The method that is used to declare an ISR and initialize the IVT with the correct vector address will depend on the programming language (i.e., C or assembler) and the language development toolsuite that is used to develop the application. In general, the user must clear the interrupt flag in the appropriate IFSx register for the source of interrupt that the ISR handles. Otherwise, the ISR will be re-entered immediately after exiting the routine. If the ISR is coded in assembly language, it must be terminated using a RETFIE instruction to unstack the saved PC value, SRL value and old CPU priority level. 2009 Microchip Technology Inc. Preliminary DS70593B-page 135 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 136 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 8.0 DIRECT MEMORY ACCESS (DMA) TABLE 8-1: PERIPHERALS WITH DMA SUPPORT IRQ Number 0 1 5 2 6 7 8 10 33 11 12 30 31 13 21 60 34 70 55 71 Peripheral Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 22. "Direct Memory Access (DMA)" (DS70182) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. Direct Memory Access (DMA) is a very efficient mechanism of copying data between peripheral SFRs (e.g., UART Receive register, Input Capture 1 buffer), and buffers or variables stored in RAM, with minimal CPU intervention. The DMA controller can automatically copy entire blocks of data without requiring the user software to read or write the peripheral Special Function Registers (SFRs) every time a peripheral interrupt occurs. The DMA controller uses a dedicated bus for data transfers and therefore, does not steal cycles from the code execution flow of the CPU. To exploit the DMA capability, the corresponding user buffers or variables must be located in DMA RAM. The dsPIC33FJXXXGPX06A/X08A/X10A peripherals that can utilize DMA are listed in Table 8-1 along with their associated Interrupt Request (IRQ) numbers. INT0 Input Capture 1 Input Capture 2 Output Compare 1 Output Compare 2 Timer2 Timer3 SPI1 SPI2 UART1 Reception UART1 Transmission UART2 Reception UART2 Transmission ADC1 ADC2 DCI ECAN1 Reception ECAN1 Transmission ECAN2 Reception ECAN2 Transmission The DMA controller features eight identical data transfer channels. Each channel has its own set of control and status registers. Each DMA channel can be configured to copy data either from buffers stored in dual port DMA RAM to peripheral SFRs, or from peripheral SFRs to buffers in DMA RAM. The DMA controller supports the following features: * Word or byte sized data transfers. * Transfers from peripheral to DMA RAM or DMA RAM to peripheral. * Indirect Addressing of DMA RAM locations with or without automatic post-increment. * Peripheral Indirect Addressing - In some peripherals, the DMA RAM read/write addresses may be partially derived from the peripheral. * One-Shot Block Transfers - Terminating DMA transfer after one block transfer. * Continuous Block Transfers - Reloading DMA RAM buffer start address after every block transfer is complete. * Ping-Pong Mode - Switching between two DMA RAM start addresses between successive block transfers, thereby filling two buffers alternately. * Automatic or manual initiation of block transfers * Each channel can select from 20 possible sources of data sources or destinations. For each DMA channel, a DMA interrupt request is generated when a block transfer is complete. Alternatively, an interrupt can be generated when half of the block has been filled. 2009 Microchip Technology Inc. Preliminary DS70593B-page 137 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 8-1: TOP LEVEL SYSTEM ARCHITECTURE USING A DEDICATED TRANSACTION BUS Peripheral Indirect Address DMA Controller DMA Ready Peripheral 3 CPU DMA DMA Control SRAM DMA RAM PORT 1 PORT 2 DMA Channels SRAM X-Bus DMA DS Bus CPU Peripheral DS Bus CPU Non-DMA Ready Peripheral CPU DMA CPU DMA DMA Ready Peripheral 1 DMA Ready Peripheral 2 Note: CPU and DMA address buses are not shown for clarity. 8.1 DMAC Registers Each DMAC Channel x (x = 0, 1, 2, 3, 4, 5, 6 or 7) contains the following registers: * A 16-bit DMA Channel Control register (DMAxCON) * A 16-bit DMA Channel IRQ Select register (DMAxREQ) * A 16-bit DMA RAM Primary Start Address Offset register (DMAxSTA) * A 16-bit DMA RAM Secondary Start Address Offset register (DMAxSTB) * A 16-bit DMA Peripheral Address register (DMAxPAD) * A 10-bit DMA Transfer Count register (DMAxCNT) An additional pair of status registers, DMACS0 and DMACS1, are common to all DMAC channels. DS70593B-page 138 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-1: R/W-0 CHEN bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- R/W-0 R/W-0 U-0 -- U-0 -- R/W-0 DMAxCON: DMA CHANNEL x CONTROL REGISTER R/W-0 SIZE R/W-0 DIR R/W-0 HALF R/W-0 NULLW U-0 -- U-0 -- U-0 -- bit 8 R/W-0 bit 0 AMODE<1:0> MODE<1:0> CHEN: Channel Enable bit 1 = Channel enabled 0 = Channel disabled SIZE: Data Transfer Size bit 1 = Byte 0 = Word DIR: Transfer Direction bit (source/destination bus select) 1 = Read from DMA RAM address, write to peripheral address 0 = Read from peripheral address, write to DMA RAM address HALF: Early Block Transfer Complete Interrupt Select bit 1 = Initiate block transfer complete interrupt when half of the data has been moved 0 = Initiate block transfer complete interrupt when all of the data has been moved NULLW: Null Data Peripheral Write Mode Select bit 1 = Null data write to peripheral in addition to DMA RAM write (DIR bit must also be clear) 0 = Normal operation Unimplemented: Read as `0' AMODE<1:0>: DMA Channel Operating Mode Select bits 11 = Reserved 10 = Peripheral Indirect Addressing mode 01 = Register Indirect without Post-Increment mode 00 = Register Indirect with Post-Increment mode Unimplemented: Read as `0' MODE<1:0>: DMA Channel Operating Mode Select bits 11 = One-Shot, Ping-Pong modes enabled (one block transfer from/to each DMA RAM buffer) 10 = Continuous, Ping-Pong modes enabled 01 = One-Shot, Ping-Pong modes disabled 00 = Continuous, Ping-Pong modes disabled bit 14 bit 13 bit 12 bit 11 bit 10-6 bit 5-4 bit 3-2 bit 1-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 139 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-2: R/W-0 FORCE(1) bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 IRQSEL6(2) R/W-0 IRQSEL5(2) R/W-0 R/W-0 R/W-0 IRQSEL2(2) R/W-0 IRQSEL1(2) DMAxREQ: DMA CHANNEL x IRQ SELECT REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 IRQSEL0(2) bit 0 IRQSEL4(2) IRQSEL3(2) FORCE: Force DMA Transfer bit(1) 1 = Force a single DMA transfer (Manual mode) 0 = Automatic DMA transfer initiation by DMA request Unimplemented: Read as `0' IRQSEL<6:0>: DMA Peripheral IRQ Number Select bits(2) 0000000-1111111 = DMAIRQ0-DMAIRQ127 selected to be Channel DMAREQ bit 14-7 bit 6-0 Note 1: The FORCE bit cannot be cleared by the user. The FORCE bit is cleared by hardware when the forced DMA transfer is complete. 2: Please see Table 8-1 for a complete listing of IRQ numbers for all interrupt sources. DS70593B-page 140 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-3: R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 DMAxSTA: DMA CHANNEL x RAM START ADDRESS OFFSET REGISTER A R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 STA<15:8> STA<7:0> STA<15:0>: Primary DMA RAM Start Address bits (source or destination) REGISTER 8-4: R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 DMAxSTB: DMA CHANNEL x RAM START ADDRESS OFFSET REGISTER B R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 0 STB<15:8> STB<7:0> W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown STB<15:0>: Secondary DMA RAM Start Address bits (source or destination) 2009 Microchip Technology Inc. Preliminary DS70593B-page 141 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-5: R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 DMAxPAD: DMA CHANNEL x PERIPHERAL ADDRESS REGISTER(1) R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 PAD<15:8> PAD<7:0> PAD<15:0>: Peripheral Address Register bits Note 1: If the channel is enabled (i.e., active), writes to this register may result in unpredictable behavior of the DMA channel and should be avoided. REGISTER 8-6: U-0 -- bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-10 bit 9-0 DMAxCNT: DMA CHANNEL x TRANSFER COUNT REGISTER(1) U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 bit 8 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 0 CNT<9:8>(2) CNT<7:0>(2) W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown Unimplemented: Read as `0' CNT<9:0>: DMA Transfer Count Register bits(2) Note 1: If the channel is enabled (i.e., active), writes to this register may result in unpredictable behavior of the DMA channel and should be avoided. 2: Number of DMA transfers = CNT<9:0> + 1. DS70593B-page 142 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-7: R/C-0 PWCOL7 bit 15 R/C-0 XWCOL7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 XWCOL6 R/C-0 XWCOL5 R/C-0 XWCOL4 R/C-0 XWCOL3 R/C-0 XWCOL2 R/C-0 XWCOL1 DMACS0: DMA CONTROLLER STATUS REGISTER 0 R/C-0 PWCOL6 R/C-0 PWCOL5 R/C-0 PWCOL4 R/C-0 PWCOL3 R/C-0 PWCOL2 R/C-0 PWCOL1 R/C-0 PWCOL0 bit 8 R/C-0 XWCOL0 bit 0 PWCOL7: Channel 7 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL6: Channel 6 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL5: Channel 5 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL4: Channel 4 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL3: Channel 3 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL2: Channel 2 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL1: Channel 1 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected PWCOL0: Channel 0 Peripheral Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL7: Channel 7 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL6: Channel 6 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL5: Channel 5 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL4: Channel 4 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 2009 Microchip Technology Inc. Preliminary DS70593B-page 143 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-7: bit 3 DMACS0: DMA CONTROLLER STATUS REGISTER 0 (CONTINUED) XWCOL3: Channel 3 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL2: Channel 2 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL1: Channel 1 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected XWCOL0: Channel 0 DMA RAM Write Collision Flag bit 1 = Write collision detected 0 = No write collision detected bit 2 bit 1 bit 0 DS70593B-page 144 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-8: U-0 -- bit 15 R-0 PPST7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-0 PPST6 R-0 PPST5 R-0 PPST4 R-0 PPST3 R-0 PPST2 R-0 PPST1 R-0 PPST0 bit 0 DMACS1: DMA CONTROLLER STATUS REGISTER 1 U-0 -- U-0 -- U-0 -- R-1 R-1 R-1 R-1 bit 8 LSTCH<3:0> Unimplemented: Read as `0' LSTCH<3:0>: Last DMA Channel Active bits 1111 = No DMA transfer has occurred since system Reset 1110-1000 = Reserved 0111 = Last data transfer was by DMA Channel 7 0110 = Last data transfer was by DMA Channel 6 0101 = Last data transfer was by DMA Channel 5 0100 = Last data transfer was by DMA Channel 4 0011 = Last data transfer was by DMA Channel 3 0010 = Last data transfer was by DMA Channel 2 0001 = Last data transfer was by DMA Channel 1 0000 = Last data transfer was by DMA Channel 0 PPST7: Channel 7 Ping-Pong Mode Status Flag bit 1 = DMA7STB register selected 0 = DMA7STA register selected PPST6: Channel 6 Ping-Pong Mode Status Flag bit 1 = DMA6STB register selected 0 = DMA6STA register selected PPST5: Channel 5 Ping-Pong Mode Status Flag bit 1 = DMA5STB register selected 0 = DMA5STA register selected PPST4: Channel 4 Ping-Pong Mode Status Flag bit 1 = DMA4STB register selected 0 = DMA4STA register selected PPST3: Channel 3 Ping-Pong Mode Status Flag bit 1 = DMA3STB register selected 0 = DMA3STA register selected PPST2: Channel 2 Ping-Pong Mode Status Flag bit 1 = DMA2STB register selected 0 = DMA2STA register selected PPST1: Channel 1 Ping-Pong Mode Status Flag bit 1 = DMA1STB register selected 0 = DMA1STA register selected PPST0: Channel 0 Ping-Pong Mode Status Flag bit 1 = DMA0STB register selected 0 = DMA0STA register selected bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 145 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 8-9: R-0 bit 15 R-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-0 R-0 R-0 R-0 R-0 R-0 R-0 bit 0 DSADR: MOST RECENT DMA RAM ADDRESS R-0 R-0 R-0 R-0 R-0 R-0 R-0 bit 8 DSADR<15:8> DSADR<7:0> DSADR<15:0>: Most Recent DMA RAM Address Accessed by DMA Controller bits DS70593B-page 146 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 9.0 OSCILLATOR CONFIGURATION The dsPIC33FJXXXGPX06A/X08A/X10A system provides: oscillator * Various external and internal oscillator options as clock sources * An on-chip PLL to scale the internal operating frequency to the required system clock frequency * The internal FRC oscillator can also be used with the PLL, thereby allowing full-speed operation without any external clock generation hardware * Clock switching between various clock sources * Programmable clock postscaler for system power savings * A Fail-Safe Clock Monitor (FSCM) that detects clock failure and takes fail-safe measures * A Clock Control register (OSCCON) * Nonvolatile Configuration bits for main oscillator selection. A simplified diagram of the oscillator system is shown in Figure 9-1. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 7. "Oscillator" (DS70186) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. FIGURE 9-1: OSC1 R(2) dsPIC33FJXXXGPX06A/X08A/X10A OSCILLATOR SYSTEM DIAGRAM Primary Oscillator XT, HS, EC DOZE<2:0> S2 DOZE FCY S3 S1 OSC2 POSCMD<1:0> PLL (1) XTPLL, HSPLL, ECPLL, FRCPLL S1/S3 FP FRCDIV FRC Oscillator FRCDIVN S7 /2 FOSC TUN<5:0> / 16 FRCDIV<2:0> FRCDIV16 FRC S6 S0 S5 LPRC Oscillator Secondary Oscillator SOSCO LPOSCEN SOSCI LPRC SOSC S4 Clock Fail Clock Switch Reset S7 NOSC<2:0> FNOSC<2:0> WDT, PWRT, FSCM Timer 1 Note 1: 2: See Figure 9-2 for PLL details. If the Oscillator is used with XT or HS modes, an extended parallel resistor with the value of 1 M must be connected. 2009 Microchip Technology Inc. Preliminary DS70593B-page 147 dsPIC33FJXXXGPX06A/X08A/X10A 9.1 CPU Clocking System There are seven system clock options provided by the dsPIC33FJXXXGPX06A/X08A/X10A: * * * * * * * FRC Oscillator FRC Oscillator with PLL Primary (XT, HS or EC) Oscillator Primary Oscillator with PLL Secondary (LP) Oscillator LPRC Oscillator FRC Oscillator with postscaler Oscillator Mode Select Configuration bits, POSCMD<1:0> (FOSC<1:0>), select the oscillator source that is used at a Power-on Reset. The FRC primary oscillator is the default (unprogrammed) selection. The Configuration bits allow users to choose between twelve different clock modes, shown in Table 9-1. The output of the oscillator (or the output of the PLL if a PLL mode has been selected) FOSC is divided by 2 to generate the device instruction clock (FCY) and the peripheral clock time base (FP). FCY defines the operating speed of the device, and speeds up to 40 MHz are supported by the dsPIC33FJXXXGPX06A/ X08A/X10A architecture. Instruction execution speed or device operating frequency, FCY, is given by: 9.1.1 SYSTEM CLOCK SOURCES The FRC (Fast RC) internal oscillator runs at a nominal frequency of 7.37 MHz. The user software can tune the FRC frequency. User software can optionally specify a factor (ranging from 1:2 to 1:256) by which the FRC clock frequency is divided. This factor is selected using the FRCDIV<2:0> (CLKDIV<10:8>) bits. The primary oscillator can use one of the following as its clock source: 1. XT (Crystal): Crystals and ceramic resonators in the range of 3 MHz to 10 MHz. The crystal is connected to the OSC1 and OSC2 pins. HS (High-Speed Crystal): Crystals in the range of 10 MHz to 40 MHz. The crystal is connected to the OSC1 and OSC2 pins. EC (External Clock): External clock signal is directly applied to the OSC1 pin. EQUATION 9-1: DEVICE OPERATING FREQUENCY FOSC FCY = ------------2 9.1.3 PLL CONFIGURATION 2. 3. The primary oscillator and internal FRC oscillator can optionally use an on-chip PLL to obtain higher speeds of operation. The PLL provides a significant amount of flexibility in selecting the device operating speed. A block diagram of the PLL is shown in Figure 9-2. The output of the primary oscillator or FRC, denoted as `FIN', is divided down by a prescale factor (N1) of 2, 3, ... or 33 before being provided to the PLL's Voltage Controlled Oscillator (VCO). The input to the VCO must be selected to be in the range of 0.8 MHz to 8 MHz. Since the minimum prescale factor is 2, this implies that FIN must be chosen to be in the range of 1.6 MHz to 16 MHz. The prescale factor `N1' is selected using the PLLPRE<4:0> bits (CLKDIV<4:0>). The PLL Feedback Divisor, selected using the PLLDIV<8:0> bits (PLLFBD<8:0>), provides a factor `M', by which the input to the VCO is multiplied. This factor must be selected such that the resulting VCO output frequency is in the range of 100 MHz to 200 MHz. The VCO output is further divided by a postscale factor `N2'. This factor is selected using the PLLPOST<1:0> bits (CLKDIV<7:6>). `N2' can be either 2, 4 or 8, and must be selected such that the PLL output frequency (FOSC) is in the range of 12.5 MHz to 80 MHz, which generates device operating speeds of 6.25-40 MIPS. For a primary oscillator or FRC oscillator, output `FIN', the PLL output `FOSC' is given by: The secondary (LP) oscillator is designed for low power and uses a 32.768 kHz crystal or ceramic resonator. The LP oscillator uses the SOSCI and SOSCO pins. The LPRC (Low-Power RC) internal oscillator runs at a nominal frequency of 32.768 kHz. It is also used as a reference clock by the Watchdog Timer (WDT) and Fail-Safe Clock Monitor (FSCM). The clock signals generated by the FRC and primary oscillators can be optionally applied to an on-chip Phase Locked Loop (PLL) to provide a wide range of output frequencies for device operation. PLL configuration is described in Section 9.1.3 "PLL Configuration". The FRC frequency depends on the FRC accuracy (see Table 25-19) and the value of the FRC Oscillator Tuning register (see Register 9-4). 9.1.2 SYSTEM CLOCK SELECTION The oscillator source that is used at a device Power-on Reset event is selected using Configuration bit settings. The oscillator Configuration bit settings are located in the Configuration registers in the program memory. (Refer to Section 22.1 "Configuration Bits" for further details.) The Initial Oscillator Selection Configuration bits, FNOSC<2:0> (FOSCSEL<2:0>), and the Primary EQUATION 9-2: FOSC CALCULATION M FOSC = FIN ------------------ N1 N2 DS70593B-page 148 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A For example, suppose a 10 MHz crystal is being used, with "XT with PLL" being the selected oscillator mode. If PLLPRE<4:0> = 0, then N1 = 2. This yields a VCO input of 10/2 = 5 MHz, which is within the acceptable range of 0.8-8 MHz. If PLLDIV<8:0> = 0x1E, then M = 32. This yields a VCO output of 5 x 32 = 160 MHz, which is within the 100-200 MHz range needed. If PLLPOST<1:0> = 0, then N2 = 2. This provides a Fosc of 160/2 = 80 MHz. The resultant device operating speed is 80/2 = 40 MIPS. EQUATION 9-3: XT WITH PLL MODE EXAMPLE 1 10000000 32 FOSC FCY = ------------- = -- --------------------------------- = 40 MIPS 2 22 2 FIGURE 9-2: dsPIC33FJXXXGPX06A/X08A/X10A PLL BLOCK DIAGRAM 0.8-8.0 MHz Here(1) Source (Crystal, External Clock or Internal RC) FVCO 100-200 MHz Here(1) VCO PLLDIV PLLPOST 12.5-80 MHz Here(1) PLLPRE X FOSC N1 Divide by 2-33 M Divide by 2-513 N2 Divide by 2, 4, 8 Note 1: This frequency range must be satisfied at all times. TABLE 9-1: CONFIGURATION BIT VALUES FOR CLOCK SELECTION Oscillator Source Internal Internal Internal Secondary Primary Primary Primary Primary Primary Primary Internal Internal POSCMD<1:0> xx xx xx xx 10 01 00 10 01 00 xx xx FNOSC<2:0> 111 110 101 100 011 011 011 010 010 010 001 000 Note 1, 2 1 1 1 -- -- 1 -- -- 1 1 1 Oscillator Mode Fast RC Oscillator with Divide-by-N (FRCDIVN) Fast RC Oscillator with Divide-by-16 (FRCDIV16) Low-Power RC Oscillator (LPRC) Secondary (Timer1) Oscillator (SOSC) Primary Oscillator (HS) with PLL (HSPLL) Primary Oscillator (XT) with PLL (XTPLL) Primary Oscillator (EC) with PLL (ECPLL) Primary Oscillator (HS) Primary Oscillator (XT) Primary Oscillator (EC) Fast RC Oscillator with PLL (FRCPLL) Fast RC Oscillator (FRC) Note 1: 2: OSC2 pin function is determined by the OSCIOFNC Configuration bit. This is the default oscillator mode for an unprogrammed (erased) device. 2009 Microchip Technology Inc. Preliminary DS70593B-page 149 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 9-1: U-0 -- bit 15 R/W-0 CLKLOCK bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-12 y = Value set from Configuration bits on POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown C = Clear only bit U-0 -- R-0 LOCK U-0 -- R/C-0 CF U-0 -- R/W-0 LPOSCEN OSCCON: OSCILLATOR CONTROL REGISTER(1) R-0 R-0 COSC<2:0> R-0 U-0 -- R/W-y R/W-y NOSC<2:0>(2) bit 8 R/W-0 OSWEN bit 0 R/W-y Unimplemented: Read as `0' COSC<2:0>: Current Oscillator Selection bits (read-only) 000 = Fast RC oscillator (FRC) 001 = Fast RC oscillator (FRC) with PLL 010 = Primary oscillator (XT, HS, EC) 011 = Primary oscillator (XT, HS, EC) with PLL 100 = Secondary oscillator (SOSC) 101 = Low-Power RC oscillator (LPRC) 110 = Fast RC oscillator (FRC) with Divide-by-16 111 = Fast RC oscillator (FRC) with Divide-by-n Unimplemented: Read as `0' NOSC<2:0>: New Oscillator Selection bits(2) 000 = Fast RC oscillator (FRC) 001 = Fast RC oscillator (FRC) with PLL 010 = Primary oscillator (XT, HS, EC) 011 = Primary oscillator (XT, HS, EC) with PLL 100 = Secondary oscillator (SOSC) 101 = Low-Power RC oscillator (LPRC) 110 = Fast RC oscillator (FRC) with Divide-by-16 111 = Fast RC oscillator (FRC) with Divide-by-n CLKLOCK: Clock Lock Enable bit 1 = If (FCKSM0 = 1), then clock and PLL configurations are locked If (FCKSM0 = 0), then clock and PLL configurations may be modified 0 = Clock and PLL selections are not locked, configurations may be modified Unimplemented: Read as `0' LOCK: PLL Lock Status bit (read-only) 1 = Indicates that PLL is in lock, or PLL start-up timer is satisfied 0 = Indicates that PLL is out of lock, start-up timer is in progress or PLL is disabled Unimplemented: Read as `0' CF: Clock Fail Detect bit (read/clear by application) 1 = FSCM has detected clock failure 0 = FSCM has not detected clock failure Unimplemented: Read as `0' bit 11 bit 10-8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 Note 1: Writes to this register require an unlock sequence. Refer to Section 7. "Oscillator" (DS70186) in the "dsPIC33F/PIC24H Family Reference Manual" (available from the Microchip website) for details. 2: Direct clock switches between any primary oscillator mode with PLL and FRCPLL mode are not permitted. This applies to clock switches in either direction. In these instances, the application must switch to FRC mode as a transition clock source between the two PLL modes. DS70593B-page 150 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 9-1: bit 1 OSCCON: OSCILLATOR CONTROL REGISTER(1) (CONTINUED) LPOSCEN: Secondary (LP) Oscillator Enable bit 1 = Enable secondary oscillator 0 = Disable secondary oscillator OSWEN: Oscillator Switch Enable bit 1 = Request oscillator switch to selection specified by NOSC<2:0> bits 0 = Oscillator switch is complete bit 0 Note 1: Writes to this register require an unlock sequence. Refer to Section 7. "Oscillator" (DS70186) in the "dsPIC33F/PIC24H Family Reference Manual" (available from the Microchip website) for details. 2: Direct clock switches between any primary oscillator mode with PLL and FRCPLL mode are not permitted. This applies to clock switches in either direction. In these instances, the application must switch to FRC mode as a transition clock source between the two PLL modes. 2009 Microchip Technology Inc. Preliminary DS70593B-page 151 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 9-2: R/W-0 ROI bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15 y = Value set from Configuration bits on POR W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 U-0 -- R/W-0 R/W-0 R/W-0 PLLPRE<4:0> bit 0 R/W-0 CLKDIV: CLOCK DIVISOR REGISTER R/W-0 R/W-1 DOZE<2:0> R/W-1 R/W-0 DOZEN(1) R/W-0 R/W-0 FRCDIV<2:0> bit 8 R/W-0 R/W-0 PLLPOST<1:0> ROI: Recover on Interrupt bit 1 = Interrupts will clear the DOZEN bit and the processor clock/peripheral clock ratio is set to 1:1 0 = Interrupts have no effect on the DOZEN bit DOZE<2:0>: Processor Clock Reduction Select bits 000 = FCY/1 001 = FCY/2 010 = FCY/4 011 = FCY/8 (default) 100 = FCY/16 101 = FCY/32 110 = FCY/64 111 = FCY/128 DOZEN: DOZE Mode Enable bit(1) 1 = DOZE<2:0> field specifies the ratio between the peripheral clocks and the processor clocks 0 = Processor clock/peripheral clock ratio forced to 1:1 FRCDIV<2:0>: Internal Fast RC Oscillator Postscaler bits 000 = FRC divide by 1 (default) 001 = FRC divide by 2 010 = FRC divide by 4 011 = FRC divide by 8 100 = FRC divide by 16 101 = FRC divide by 32 110 = FRC divide by 64 111 = FRC divide by 256 PLLPOST<1:0>: PLL VCO Output Divider Select bits (also denoted as `N2', PLL postscaler) 00 = Output/2 01 = Output/4 (default) 10 = Reserved 11 = Output/8 Unimplemented: Read as `0' PLLPRE<4:0>: PLL Phase Detector Input Divider bits (also denoted as `N1', PLL prescaler) 00000 = Input/2 (default) 00001 = Input/3 * * * 11111 = Input/33 bit 14-12 bit 11 bit 10-8 bit 7-6 bit 5 bit 4-0 Note 1: This bit is cleared when the ROI bit is set and an interrupt occurs. DS70593B-page 152 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 9-3: U-0 -- bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-9 bit 8-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-1 R/W-1 R/W-0 R/W-0 R/W-0 PLLFBD: PLL FEEDBACK DIVISOR REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0(1) PLLDIV<8> bit 8 R/W-0 bit 0 PLLDIV<7:0> Unimplemented: Read as `0' PLLDIV<8:0>: PLL Feedback Divisor bits (also denoted as `M', PLL multiplier) 000000000 = 2 000000001 = 3 000000010 = 4 * * * 000110000 = 50 (default) * * * 111111111 = 513 2009 Microchip Technology Inc. Preliminary DS70593B-page 153 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 9-4: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-6 bit 5-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 OSCTUN: FRC OSCILLATOR TUNING REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 bit 0 TUN<5:0>(1) Unimplemented: Read as `0' TUN<5:0>: FRC Oscillator Tuning bits(1) 011111 = Center frequency + 11.625% (8.23 MHz) 011110 = Center frequency + 11.25% (8.20 MHz) * * * 000001 = Center frequency + 0.375% (7.40 MHz) 000000 = Center frequency (7.37 MHz nominal) 111111 = Center frequency - 0.375% (7.345 MHz) * * * 100001 = Center frequency - 11.625% (6.52 MHz) 100000 = Center frequency - 12% (6.49 MHz) Note 1: OSCTUN functionality has been provided to help customers compensate for temperature effects on the FRC frequency over a wide range of temperatures. The tuning step size is an approximation and is neither characterized nor tested. DS70593B-page 154 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 9.2 Clock Switching Operation 2. Applications are free to switch between any of the four clock sources (Primary, LP, FRC and LPRC) under software control at any time. To limit the possible side effects that could result from this flexibility, dsPIC33FJXXXGPX06A/X08A/X10A devices have a safeguard lock built into the switch process. Note: Primary Oscillator mode has three different submodes (XT, HS and EC) which are determined by the POSCMD<1:0> Configuration bits. While an application can switch to and from Primary Oscillator mode in software, it cannot switch between the different primary submodes without reprogramming the device. If a valid clock switch has been initiated, the LOCK (OSCCON<5>) and the CF (OSCCON<3>) status bits are cleared. The new oscillator is turned on by the hardware if it is not currently running. If a crystal oscillator must be turned on, the hardware waits until the Oscillator Start-up Timer (OST) expires. If the new source is using the PLL, the hardware waits until a PLL lock is detected (LOCK = 1). The hardware waits for 10 clock cycles from the new clock source and then performs the clock switch. The hardware clears the OSWEN bit to indicate a successful clock transition. In addition, the NOSC bit values are transferred to the COSC status bits. The old clock source is turned off at this time, with the exception of LPRC (if WDT or FSCM are enabled) or LP (if LPOSCEN remains set). Note 1: The processor continues to execute code throughout the clock switching sequence. Timing sensitive code should not be executed during this time. 2: Direct clock switches between any primary oscillator mode with PLL and FRCPLL mode are not permitted. This applies to clock switches in either direction. In these instances, the application must switch to FRC mode as a transition clock source between the two PLL modes. 3: Refer to Section 7. "Oscillator" (DS70186) in the "dsPIC33F/PIC24H Family Reference Manual" for details. 3. 4. 5. 6. 9.2.1 ENABLING CLOCK SWITCHING To enable clock switching, the FCKSM1 Configuration bit in the Configuration register must be programmed to `0'. (Refer to Section 22.1 "Configuration Bits" for further details.) If the FCKSM1 Configuration bit is unprogrammed (`1'), the clock switching function and Fail-Safe Clock Monitor function are disabled. This is the default setting. The NOSC control bits (OSCCON<10:8>) do not control the clock selection when clock switching is disabled. However, the COSC bits (OSCCON<14:12>) reflect the clock source selected by the FNOSC Configuration bits. The OSWEN control bit (OSCCON<0>) has no effect when clock switching is disabled. It is held at `0' at all times. 9.2.2 OSCILLATOR SWITCHING SEQUENCE 9.3 Fail-Safe Clock Monitor (FSCM) At a minimum, performing a clock switch requires this basic sequence: 1. If desired, read the COSC bits (OSCCON<14:12>) to determine the current oscillator source. Perform the unlock sequence to allow a write to the OSCCON register high byte. Write the appropriate value to the NOSC control bits (OSCCON<10:8>) for the new oscillator source. Perform the unlock sequence to allow a write to the OSCCON register low byte. Set the OSWEN bit to initiate the oscillator switch. 2. 3. The Fail-Safe Clock Monitor (FSCM) allows the device to continue to operate even in the event of an oscillator failure. The FSCM function is enabled by programming. If the FSCM function is enabled, the LPRC internal oscillator runs at all times (except during Sleep mode) and is not subject to control by the Watchdog Timer. In the event of an oscillator failure, the FSCM generates a clock failure trap event and switches the system clock over to the FRC oscillator. Then the application program can either attempt to restart the oscillator or execute a controlled shutdown. The trap can be treated as a warm Reset by simply loading the Reset address into the oscillator fail trap vector. If the PLL multiplier is used to scale the system clock, the internal FRC is also multiplied by the same factor on clock failure. Essentially, the device switches to FRC with PLL on a clock failure. 4. 5. Once the basic sequence is completed, the system clock hardware responds automatically as follows: 1. The clock switching hardware compares the COSC status bits with the new value of the NOSC control bits. If they are the same, then the clock switch is a redundant operation. In this case, the OSWEN bit is cleared automatically and the clock switch is aborted. 2009 Microchip Technology Inc. Preliminary DS70593B-page 155 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 156 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 10.0 POWER-SAVING FEATURES 10.2 Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 9. "Watchdog Timer and Power-Saving Modes" (DS70196) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The dsPIC33FJXXXGPX06A/X08A/X10A devices provide the ability to manage power consumption by selectively managing clocking to the CPU and the peripherals. In general, a lower clock frequency and a reduction in the number of circuits being clocked constitutes lower consumed power. dsPIC33FJXXXGPX06A/X08A/X10A devices can manage power consumption in four different ways: * * * * Clock frequency Instruction-based Sleep and Idle modes Software-controlled Doze mode Selective peripheral control in software Instruction-Based Power-Saving Modes dsPIC33FJXXXGPX06A/X08A/X10A devices have two special power-saving modes that are entered through the execution of a special PWRSAV instruction. Sleep mode stops clock operation and halts all code execution. Idle mode halts the CPU and code execution, but allows peripheral modules to continue operation. The assembly syntax of the PWRSAV instruction is shown in Example 10-1. Note: SLEEP_MODE and IDLE_MODE are constants defined in the assembler include file for the selected device. Sleep and Idle modes can be exited as a result of an enabled interrupt, WDT time-out or a device Reset. When the device exits these modes, it is said to "wake-up". 10.2.1 SLEEP MODE Sleep mode has these features: * The system clock source is shut down. If an on-chip oscillator is used, it is turned off. * The device current consumption is reduced to a minimum, provided that no I/O pin is sourcing current. * The Fail-Safe Clock Monitor does not operate during Sleep mode since the system clock source is disabled. * The LPRC clock continues to run in Sleep mode if the WDT is enabled. * The WDT, if enabled, is automatically cleared prior to entering Sleep mode. * Some device features or peripherals may continue to operate in Sleep mode. This includes items such as the input change notification on the I/O ports, or peripherals that use an external clock input. Any peripheral that requires the system clock source for its operation is disabled in Sleep mode. The device will wake-up from Sleep mode on any of these events: * Any interrupt source that is individually enabled. * Any form of device Reset. * A WDT time-out. On wake-up from Sleep, the processor restarts with the same clock source that was active when Sleep mode was entered. Combinations of these methods can be used to selectively tailor an application's power consumption while still maintaining critical application features, such as timing-sensitive communications. 10.1 Clock Frequency and Clock Switching dsPIC33FJXXXGPX06A/X08A/X10A devices allow a wide range of clock frequencies to be selected under application control. If the system clock configuration is not locked, users can choose low-power or high-precision oscillators by simply changing the NOSC bits (OSCCON<10:8>). The process of changing a system clock during operation, as well as limitations to the process, are discussed in more detail in Section 9.0 "Oscillator Configuration". EXAMPLE 10-1: PWRSAV INSTRUCTION SYNTAX ; Put the device into SLEEP mode ; Put the device into IDLE mode PWRSAV #SLEEP_MODE PWRSAV #IDLE_MODE 2009 Microchip Technology Inc. Preliminary DS70593B-page 157 dsPIC33FJXXXGPX06A/X08A/X10A 10.2.2 IDLE MODE Idle mode has these features: * The CPU stops executing instructions. * The WDT is automatically cleared. * The system clock source remains active. By default, all peripheral modules continue to operate normally from the system clock source, but can also be selectively disabled (see Section 10.4 "Peripheral Module Disable"). * If the WDT or FSCM is enabled, the LPRC also remains active. The device will wake from Idle mode on any of these events: * Any interrupt that is individually enabled. * Any device Reset. * A WDT time-out. On wake-up from Idle, the clock is reapplied to the CPU and instruction execution will begin (2-4 clock cycles later), starting with the instruction following the PWRSAV instruction, or the first instruction in the ISR. Doze mode is enabled by setting the DOZEN bit (CLKDIV<11>). The ratio between peripheral and core clock speed is determined by the DOZE<2:0> bits (CLKDIV<14:12>). There are eight possible configurations, from 1:1 to 1:128, with 1:1 being the default setting. It is also possible to use Doze mode to selectively reduce power consumption in event-driven applications. This allows clock-sensitive functions, such as synchronous communications, to continue without interruption while the CPU idles, waiting for something to invoke an interrupt routine. Enabling the automatic return to full-speed CPU operation on interrupts is enabled by setting the ROI bit (CLKDIV<15>). By default, interrupt events have no effect on Doze mode operation. For example, suppose the device is operating at 20 MIPS and the CAN module has been configured for 500 kbps based on this device operating speed. If the device is now placed in Doze mode with a clock frequency ratio of 1:4, the CAN module continues to communicate at the required bit rate of 500 kbps, but the CPU now starts executing instructions at a frequency of 5 MIPS. 10.2.3 INTERRUPTS COINCIDENT WITH POWER SAVE INSTRUCTIONS 10.4 Peripheral Module Disable Any interrupt that coincides with the execution of a PWRSAV instruction is held off until entry into Sleep or Idle mode has completed. The device then wakes up from Sleep or Idle mode. 10.3 Doze Mode Generally, changing clock speed and invoking one of the power-saving modes are the preferred strategies for reducing power consumption. There may be circumstances, however, where this is not practical. For example, it may be necessary for an application to maintain uninterrupted synchronous communication, even while it is doing nothing else. Reducing system clock speed may introduce communication errors, while using a power-saving mode may stop communications completely. Doze mode is a simple and effective alternative method to reduce power consumption while the device is still executing code. In this mode, the system clock continues to operate from the same source and at the same speed. Peripheral modules continue to be clocked at the same speed, while the CPU clock speed is reduced. Synchronization between the two clock domains is maintained, allowing the peripherals to access the SFRs while the CPU executes code at a slower rate. The Peripheral Module Disable (PMD) registers provide a method to disable a peripheral module by stopping all clock sources supplied to that module. When a peripheral is disabled via the appropriate PMD control bit, the peripheral is in a minimum power consumption state. The control and status registers associated with the peripheral are also disabled, so writes to those registers will have no effect and read values will be invalid. A peripheral module is only enabled if both the associated bit in the PMD register is cleared and the peripheral is supported by the specific dsPIC(R) DSC variant. If the peripheral is present in the device, it is enabled in the PMD register by default. Note: If a PMD bit is set, the corresponding module is disabled after a delay of 1 instruction cycle. Similarly, if a PMD bit is cleared, the corresponding module is enabled after a delay of 1 instruction cycle (assuming the module control registers are already configured to enable module operation). DS70593B-page 158 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 10-1: R/W-0 T5MD bit 15 R/W-0 I2C1MD bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 U2MD R/W-0 U1MD R/W-0 SPI2MD R/W-0 SPI1MD R/W-0 C2MD R/W-0 C1MD PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1 R/W-0 T3MD R/W-0 T2MD R/W-0 T1MD U-0 -- U-0 -- R/W-0 DCIMD bit 8 R/W-0 AD1MD(1) bit 0 R/W-0 T4MD T5MD: Timer5 Module Disable bit 1 = Timer5 module is disabled 0 = Timer5 module is enabled T4MD: Timer4 Module Disable bit 1 = Timer4 module is disabled 0 = Timer4 module is enabled T3MD: Timer3 Module Disable bit 1 = Timer3 module is disabled 0 = Timer3 module is enabled T2MD: Timer2 Module Disable bit 1 = Timer2 module is disabled 0 = Timer2 module is enabled T1MD: Timer1 Module Disable bit 1 = Timer1 module is disabled 0 = Timer1 module is enabled Unimplemented: Read as `0' DCIMD: DCI Module Disable bit 1 = DCI module is disabled 0 = DCI module is enabled I2C1MD: I2C1 Module Disable bit 1 = I2C1 module is disabled 0 = I2C1 module is enabled U2MD: UART2 Module Disable bit 1 = UART2 module is disabled 0 = UART2 module is enabled U1MD: UART1 Module Disable bit 1 = UART1 module is disabled 0 = UART1 module is enabled SPI2MD: SPI2 Module Disable bit 1 = SPI2 module is disabled 0 = SPI2 module is enabled SPI1MD: SPI1 Module Disable bit 1 = SPI1 module is disabled 0 = SPI1 module is enabled C2MD: ECAN2 Module Disable bit 1 = ECAN2 module is disabled 0 = ECAN2 module is enabled bit 14 bit 13 bit 12 bit 11 bit 10-9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 2009 Microchip Technology Inc. Preliminary DS70593B-page 159 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 10-1: bit 1 PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1 (CONTINUED) C1MD: ECAN2 Module Disable bit 1 = ECAN1 module is disabled 0 = ECAN1 module is enabled AD1MD: ADC1 Module Disable bit(1) 1 = ADC1 module is disabled 0 = ADC1 module is enabled bit 0 Note 1: PCFGx bits have no effect if ADC module is disabled by setting this bit. In this case all port pins multiplexed with ANx will be in Digital mode. DS70593B-page 160 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 10-2: R/W-0 IC8MD bit 15 R/W-0 OC8MD bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 OC7MD R/W-0 OC6MD R/W-0 OC5MD R/W-0 OC4MD R/W-0 OC3MD R/W-0 OC2MD PMD2: PERIPHERAL MODULE DISABLE CONTROL REGISTER 2 R/W-0 IC6MD R/W-0 IC5MD R/W-0 IC4MD R/W-0 IC3MD R/W-0 IC2MD R/W-0 IC1MD bit 8 R/W-0 OC1MD bit 0 R/W-0 IC7MD IC8MD: Input Capture 8 Module Disable bit 1 = Input Capture 8 module is disabled 0 = Input Capture 8 module is enabled IC7MD: Input Capture 7 Module Disable bit 1 = Input Capture 7 module is disabled 0 = Input Capture 7 module is enabled IC6MD: Input Capture 6 Module Disable bit 1 = Input Capture 6 module is disabled 0 = Input Capture 6 module is enabled IC5MD: Input Capture 5 Module Disable bit 1 = Input Capture 5 module is disabled 0 = Input Capture 5 module is enabled IC4MD: Input Capture 4 Module Disable bit 1 = Input Capture 4 module is disabled 0 = Input Capture 4 module is enabled IC3MD: Input Capture 3 Module Disable bit 1 = Input Capture 3 module is disabled 0 = Input Capture 3 module is enabled IC2MD: Input Capture 2 Module Disable bit 1 = Input Capture 2 module is disabled 0 = Input Capture 2 module is enabled IC1MD: Input Capture 1 Module Disable bit 1 = Input Capture 1 module is disabled 0 = Input Capture 1 module is enabled OC8MD: Output Compare 8 Module Disable bit 1 = Output Compare 8 module is disabled 0 = Output Compare 8 module is enabled OC7MD: Output Compare 4 Module Disable bit 1 = Output Compare 7 module is disabled 0 = Output Compare 7 module is enabled OC6MD: Output Compare 6 Module Disable bit 1 = Output Compare 6 module is disabled 0 = Output Compare 6 module is enabled OC5MD: Output Compare 5 Module Disable bit 1 = Output Compare 5 module is disabled 0 = Output Compare 5 module is enabled bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 2009 Microchip Technology Inc. Preliminary DS70593B-page 161 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 10-2: bit 3 PMD2: PERIPHERAL MODULE DISABLE CONTROL REGISTER 2 (CONTINUED) OC4MD: Output Compare 4 Module Disable bit 1 = Output Compare 4 module is disabled 0 = Output Compare 4 module is enabled OC3MD: Output Compare 3 Module Disable bit 1 = Output Compare 3 module is disabled 0 = Output Compare 3 module is enabled OC2MD: Output Compare 2 Module Disable bit 1 = Output Compare 2 module is disabled 0 = Output Compare 2 module is enabled OC1MD: Output Compare 1 Module Disable bit 1 = Output Compare 1 module is disabled 0 = Output Compare 1 module is enabled bit 2 bit 1 bit 0 DS70593B-page 162 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 10-3: R/W-0 T9MD bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 I2C2MD PMD3: PERIPHERAL MODULE DISABLE CONTROL REGISTER 3 R/W-0 T7MD R/W-0 T6MD U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 AD2MD(1) bit 0 R/W-0 T8MD T9MD: Timer9 Module Disable bit 1 = Timer9 module is disabled 0 = Timer9 module is enabled T8MD: Timer8 Module Disable bit 1 = Timer8 module is disabled 0 = Timer8 module is enabled T7MD: Timer7 Module Disable bit 1 = Timer7 module is disabled 0 = Timer7 module is enabled T6MD: Timer6 Module Disable bit 1 = Timer6 module is disabled 0 = Timer6 module is enabled Unimplemented: Read as `0' I2C2MD: I2C2 Module Disable bit 1 = I2C2 module is disabled 0 = I2C2 module is enabled AD2MD: AD2 Module Disable bit(1) 1 = AD2 module is disabled 0 = AD2 module is enabled bit 14 bit 13 bit 12 bit 11-2 bit 1 bit 0 Note 1: PCFGx bits have no effect if ADC module is disabled by setting this bit. In this case all port pins multiplexed with ANx will be in Digital mode. 2009 Microchip Technology Inc. Preliminary DS70593B-page 163 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 164 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 11.0 I/O PORTS Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 10. "I/O Ports" (DS70193) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. All of the device pins (except VDD, VSS, MCLR and OSC1/CLKIN) are shared between the peripherals and the parallel I/O ports. All I/O input ports feature Schmitt Trigger inputs for improved noise immunity. the I/O pin. The logic also prevents "loop through", in which a port's digital output can drive the input of a peripheral that shares the same pin. Figure 11-1 illustrates how ports are shared with other peripherals and the associated I/O pin to which they are connected. When a peripheral is enabled and actively driving an associated pin, the use of the pin as a general purpose output pin is disabled. The I/O pin may be read, but the output driver for the parallel port bit will be disabled. If a peripheral is enabled, but the peripheral is not actively driving a pin, that pin may be driven by a port. All port pins have three registers directly associated with their operation as digital I/O. The data direction register (TRISx) determines whether the pin is an input or an output. If the data direction bit is a `1', then the pin is an input. All port pins are defined as inputs after a Reset. Reads from the latch (LATx), read the latch. Writes to the latch, write the latch. Reads from the port (PORTx), read the port pins, while writes to the port pins, write the latch. Any bit and its associated data and control registers that are not valid for a particular device will be disabled. That means the corresponding LATx and TRISx registers and the port pins will read as zeros. When a pin is shared with another peripheral or function that is defined as an input only, it is nevertheless regarded as a dedicated port because there is no other competing source of outputs. An example is the INT4 pin. 11.1 Parallel I/O (PIO) Ports A parallel I/O port that shares a pin with a peripheral is, in general, subservient to the peripheral. The peripheral's output buffer data and control signals are provided to a pair of multiplexers. The multiplexers select whether the peripheral or the associated port has ownership of the output data and control signals of FIGURE 11-1: BLOCK DIAGRAM OF A TYPICAL SHARED PORT STRUCTURE Peripheral Module Peripheral Input Data Peripheral Module Enable Peripheral Output Enable Peripheral Output Data 1 0 1 0 Output Enable Output Multiplexers I/O PIO Module Read TRIS Output Data Data Bus WR TRIS D CK Q I/O Pin TRIS Latch D WR LAT + WR PORT CK Data Latch Q Read LAT Input Data Read Port 2009 Microchip Technology Inc. Preliminary DS70593B-page 165 dsPIC33FJXXXGPX06A/X08A/X10A 11.2 Open-Drain Configuration 11.4 I/O Port Write/Read Timing In addition to the PORT, LAT and TRIS registers for data control, some port pins can also be individually configured for either digital or open-drain output. This is controlled by the Open-Drain Control register, ODCx, associated with each port. Setting any of the bits configures the corresponding pin to act as an open-drain output. The open-drain feature allows the generation of outputs higher than VDD (e.g., 5V) on any desired 5V tolerant pins by using external pull-up resistors. The maximum open-drain voltage allowed is the same as the maximum VIH specification. See "Pin Diagrams (Continued)" for the available pins and their functionality. One instruction cycle is required between a port direction change or port write operation and a read operation of the same port. Typically, this instruction would be a NOP. 11.5 Input Change Notification 11.3 Configuring Analog Port Pins The input change notification function of the I/O ports allows the dsPIC33FJXXXGPX06A/X08A/X10A devices to generate interrupt requests to the processor in response to a change-of-state on selected input pins. This feature is capable of detecting input change-of-states even in Sleep mode, when the clocks are disabled. Depending on the device pin count, there are up to 24 external signals (CN0 through CN23) that can be selected (enabled) for generating an interrupt request on a change-of-state. There are four control registers associated with the CN module. The CNEN1 and CNEN2 registers contain the CN interrupt enable (CNxIE) control bits for each of the CN input pins. Setting any of these bits enables a CN interrupt for the corresponding pins. Each CN pin also has a weak pull-up connected to it. The pull-ups act as a current source that is connected to the pin and eliminate the need for external resistors when push button or keypad devices are connected. The pull-ups are enabled separately using the CNPU1 and CNPU2 registers, which contain the weak pull-up enable (CNxPUE) bits for each of the CN pins. Setting any of the control bits enables the weak pull-ups for the corresponding pins. Note: Pull-ups on change notification pins should always be disabled whenever the port pin is configured as a digital output. The use of the ADxPCFGH, ADxPCFGL and TRIS registers control the operation of the ADC port pins. The port pins that are desired as analog inputs must have their corresponding TRIS bit set (input). If the TRIS bit is cleared (output), the digital output level (VOH or VOL) is converted. Clearing any bit in the ADxPCFGH or ADxPCFGL register configures the corresponding bit to be an analog pin. This is also the Reset state of any I/O pin that has an analog (ANx) function associated with it. Note: In devices with two ADC modules, if the corresponding PCFG bit in either AD1PCFGH(L) and AD2PCFGH(L) is cleared, the pin is configured as an analog input. When reading the PORT register, all pins configured as analog input channels will read as cleared (a low level). Pins configured as digital inputs will not convert an analog input. Analog levels on any pin that is defined as a digital input (including the ANx pins) can cause the input buffer to consume current that exceeds the device specifications. Note: The voltage on an analog input pin can be between -0.3V to (VDD + 0.3 V). EXAMPLE 11-1: MOV MOV NOP btss 0xFF00, W0 W0, TRISBB PORTB, #13 PORT WRITE/READ EXAMPLE ; ; ; ; Configure PORTB<15:8> as inputs and PORTB<7:0> as outputs Delay 1 cycle Next Instruction DS70593B-page 166 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 12.0 TIMER1 Timer1 also supports these features: * Timer gate operation * Selectable prescaler settings * Timer operation during CPU Idle and Sleep modes * Interrupt on 16-bit Period register match or falling edge of external gate signal Figure 12-1 presents a block diagram of the 16-bit timer module. To configure Timer1 for operation: 1. 2. 3. 4. 5. 6. Set the TON bit (= 1) in the T1CON register. Select the timer prescaler ratio using the TCKPS<1:0> bits in the T1CON register. Set the Clock and Gating modes using the TCS and TGATE bits in the T1CON register. Set or clear the TSYNC bit in T1CON to select synchronous or asynchronous operation. Load the timer period value into the PR1 register. If interrupts are required, set the interrupt enable bit, T1IE. Use the priority bits, T1IP<2:0>, to set the interrupt priority. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 11. "Timers" (DS70205) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The Timer1 module is a 16-bit timer, which can serve as the time counter for the real-time clock, or operate as a free-running interval timer/counter. Timer1 can operate in three modes: * 16-bit Timer * 16-bit Synchronous Counter * 16-bit Asynchronous Counter FIGURE 12-1: 16-BIT TIMER1 MODULE BLOCK DIAGRAM TCKPS<1:0> TON 1x Gate Sync TCY Prescaler 1, 8, 64, 256 2 SOSCO/ T1CK SOSCEN SOSCI 01 00 TGATE TCS TGATE 1 Set T1IF 0 Reset Q Q D CK 0 TMR1 1 Comparator TSYNC Sync Equal PR1 2009 Microchip Technology Inc. Preliminary DS70593B-page 167 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 12-1: R/W-0 TON bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 TGATE R/W-0 R/W-0 U-0 -- R/W-0 TSYNC R/W-0 TCS U-0 -- bit 0 T1CON: TIMER1 CONTROL REGISTER U-0 -- R/W-0 TSIDL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 TCKPS<1:0> TON: Timer1 On bit 1 = Starts 16-bit Timer1 0 = Stops 16-bit Timer1 Unimplemented: Read as `0' TSIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode Unimplemented: Read as `0' TGATE: Timer1 Gated Time Accumulation Enable bit When T1CS = 1: This bit is ignored. When T1CS = 0: 1 = Gated time accumulation enabled 0 = Gated time accumulation disabled TCKPS<1:0>: Timer1 Input Clock Prescale Select bits 11 = 1:256 10 = 1:64 01 = 1:8 00 = 1:1 Unimplemented: Read as `0' TSYNC: Timer1 External Clock Input Synchronization Select bit When TCS = 1: 1 = Synchronize external clock input 0 = Do not synchronize external clock input When TCS = 0: This bit is ignored. TCS: Timer1 Clock Source Select bit 1 = External clock from pin T1CK (on the rising edge) 0 = Internal clock (FCY) Unimplemented: Read as `0' bit 14 bit 13 bit 12-7 bit 6 bit 5-4 bit 3 bit 2 bit 1 bit 0 DS70593B-page 168 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 13.0 TIMER2/3, TIMER4/5, TIMER6/7 AND TIMER8/9 Note: For 32-bit operation, T3CON, T5CON, T7CON and T9CON control bits are ignored. Only T2CON, T4CON, T6CON and T8CON control bits are used for setup and control. Timer2, Timer4, Timer6 and Timer8 clock and gate inputs are utilized for the 32-bit timer modules, but an interrupt is generated with the Timer3, Timer5, Ttimer7 and Timer9 interrupt flags. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 11. "Timers" (DS70205) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The Timer2/3, Timer4/5, Timer6/7 and Timer8/9 modules are 32-bit timers, which can also be configured as four independent 16-bit timers with selectable operating modes. As a 32-bit timer, Timer2/3, Timer4/5, Timer6/7 and Timer8/9 operate in three modes: * Two Independent 16-bit Timers (e.g., Timer2 and Timer3) with all 16-bit operating modes (except Asynchronous Counter mode) * Single 32-bit Timer * Single 32-bit Synchronous Counter They also support these features: Timer Gate Operation Selectable Prescaler Settings Timer Operation during Idle and Sleep modes Interrupt on a 32-bit Period Register Match Time Base for Input Capture and Output Compare Modules (Timer2 and Timer3 only) * ADC1 Event Trigger (Timer2/3 only) * ADC2 Event Trigger (Timer4/5 only) Individually, all eight of the 16-bit timers can function as synchronous timers or counters. They also offer the features listed above, except for the event trigger; this is implemented only with Timer2/3. The operating modes and enabled features are determined by setting the appropriate bit(s) in the T2CON, T3CON, T4CON, T5CON, T6CON, T7CON, T8CON and T9CON registers. T2CON, T4CON, T6CON and T8CON are shown in generic form in Register 13-1. T3CON, T5CON, T7CON and T9CON are shown in Register 13-2. For 32-bit timer/counter operation, Timer2, Timer4, Timer6 or Timer8 is the least significant word; Timer3, Timer5, Timer7 or Timer9 is the most significant word of the 32-bit timers. * * * * * To configure Timer2/3, Timer4/5, Timer6/7 or Timer8/9 for 32-bit operation: 1. 2. 3. 4. Set the corresponding T32 control bit. Select the prescaler ratio for Timer2, Timer4, Timer6 or Timer8 using the TCKPS<1:0> bits. Set the Clock and Gating modes using the corresponding TCS and TGATE bits. Load the timer period value. PR3, PR5, PR7 or PR9 contains the most significant word of the value, while PR2, PR4, PR6 or PR8 contains the least significant word. If interrupts are required, set the interrupt enable bit, T3IE, T5IE, T7IE or T9IE. Use the priority bits, T3IP<2:0>, T5IP<2:0>, T7IP<2:0> or T9IP<2:0>, to set the interrupt priority. While Timer2, Timer4, Timer6 or Timer8 control the timer, the interrupt appears as a Timer3, Timer5, Timer7 or Timer9 interrupt. Set the corresponding TON bit. 5. 6. The timer value at any point is stored in the register pair, TMR3:TMR2, TMR5:TMR4, TMR7:TMR6 or TMR9:TMR8. TMR3, TMR5, TMR7 or TMR9 always contains the most significant word of the count, while TMR2, TMR4, TMR6 or TMR8 contains the least significant word. To configure any of the timers for individual 16-bit operation: 1. 2. 3. 4. 5. Clear the T32 bit corresponding to that timer. Select the timer prescaler ratio using the TCKPS<1:0> bits. Set the Clock and Gating modes using the TCS and TGATE bits. Load the timer period value into the PRx register. If interrupts are required, set the interrupt enable bit, TxIE. Use the priority bits, TxIP<2:0>, to set the interrupt priority. Set the TON bit. 6. A block diagram for a 32-bit timer pair (Timer4/5) example is shown in Figure 13-1 and a timer (Timer4) operating in 16-bit mode example is shown in Figure 13-2. Note: Only Timer2 and Timer3 can trigger a DMA data transfer. 2009 Microchip Technology Inc. Preliminary DS70593B-page 169 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 13-1: TIMER2/3 (32-BIT) BLOCK DIAGRAM(1) TCKPS<1:0> 2 Prescaler 1, 8, 64, 256 T2CK Gate Sync TCY TGATE 1x TON 01 00 TGATE TCS 1 Set T3IF 0 PR3 ADC Event Trigger(2) Q Q D CK PR2 Equal MSb Reset 16 Comparator LSb TMR3 TMR2 Sync Read TMR2 Write TMR2 16 16 TMR3HLD 16 Data Bus<15:0> Note 1: 2: The 32-bit timer control bit, T32, must be set for 32-bit timer/counter operation. All control bits are respective to the T2CON register. The ADC event trigger is available only on Timer2/3. DS70593B-page 170 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 13-2: TIMER2 (16-BIT) BLOCK DIAGRAM TCKPS<1:0> 2 Prescaler 1, 8, 64, 256 T2CK Gate Sync TON 1x 01 00 TCY TCS TGATE TGATE 1 Set T2IF 0 Reset TMR2 Q Q D CK Sync Comparator Equal PR2 2009 Microchip Technology Inc. Preliminary DS70593B-page 171 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 13-1: R/W-0 TON bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 TGATE R/W-0 R/W-0 R/W-0 T32 U-0 -- R/W-0 TCS (1) TxCON (T2CON, T4CON, T6CON OR T8CON) CONTROL REGISTER U-0 -- R/W-0 TSIDL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 U-0 -- bit 0 TCKPS<1:0> TON: Timerx On bit When T32 = 1: 1 = Starts 32-bit Timerx/y 0 = Stops 32-bit Timerx/y When T32 = 0: 1 = Starts 16-bit Timerx 0 = Stops 16-bit Timerx Unimplemented: Read as `0' TSIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode Unimplemented: Read as `0' TGATE: Timerx Gated Time Accumulation Enable bit When TCS = 1: This bit is ignored. When TCS = 0: 1 = Gated time accumulation enabled 0 = Gated time accumulation disabled TCKPS<1:0>: Timerx Input Clock Prescale Select bits 11 = 1:256 10 = 1:64 01 = 1:8 00 = 1:1 T32: 32-bit Timer Mode Select bit 1 = Timerx and Timery form a single 32-bit timer 0 = Timerx and Timery act as two 16-bit timers Unimplemented: Read as `0' TCS: Timerx Clock Source Select bit(1) 1 = External clock from pin TxCK (on the rising edge) 0 = Internal clock (FCY) Unimplemented: Read as `0' bit 14 bit 13 bit 12-7 bit 6 bit 5-4 bit 3 bit 2 bit 1 bit 0 Note 1: The TxCK pin is not available on all timers. Refer to the "Pin Diagrams" section for the available pins. DS70593B-page 172 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 13-2: R/W-0 TON(1) bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 TGATE(1) R/W-0 R/W-0 U-0 -- U-0 -- R/W-0 TCS(1,3) U-0 -- bit 0 TyCON (T3CON, T5CON, T7CON OR T9CON) CONTROL REGISTER U-0 -- R/W-0 TSIDL(2) U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 TCKPS<1:0>(1) TON: Timery On bit(1) 1 = Starts 16-bit Timery 0 = Stops 16-bit Timery Unimplemented: Read as `0' TSIDL: Stop in Idle Mode bit(2) 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode Unimplemented: Read as `0' TGATE: Timery Gated Time Accumulation Enable bit(1) When TCS = 1: This bit is ignored. When TCS = 0: 1 = Gated time accumulation enabled 0 = Gated time accumulation disabled TCKPS<1:0>: Timer3 Input Clock Prescale Select bits(1) 11 = 1:256 10 = 1:64 01 = 1:8 00 = 1:1 Unimplemented: Read as `0' TCS: Timery Clock Source Select bit(1,3) 1 = External clock from pin TyCK (on the rising edge) 0 = Internal clock (FCY) Unimplemented: Read as `0' bit 14 bit 13 bit 12-7 bit 6 bit 5-4 bit 3-2 bit 1 bit 0 Note 1: When 32-bit operation is enabled (T2CON<3> = 1), these bits have no effect on Timery operation; all timer functions are set through T2CON. 2: When 32-bit timer operation is enabled (T32 = 1) in the Timer Control register (TxCON<3>), the TSIDL bit must be cleared to operate the 32-bit timer in Idle mode. 3: The TyCK pin is not available on all timers. Refer to the "Pin Diagrams" section for the available pins. 2009 Microchip Technology Inc. Preliminary DS70593B-page 173 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 174 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 14.0 INPUT CAPTURE 2. 3. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 12. "Input Capture" (DS70198) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The input capture module is useful in applications requiring frequency (period) and pulse measurement. The dsPIC33FJXXXGPX06A/X08A/X10A devices support up to eight input capture channels. The input capture module captures the 16-bit value of the selected Time Base register when an event occurs at the ICx pin. The events that cause a capture event are listed below in three categories: 1. Simple Capture Event modes -Capture timer value on every falling edge of input at ICx pin -Capture timer value on every rising edge of input at ICx pin Capture timer value on every edge (rising and falling) Prescaler Capture Event modes -Capture timer value on every 4th rising edge of input at ICx pin -Capture timer value on every 16th rising edge of input at ICx pin Each input capture channel can select between one of two 16-bit timers (Timer2 or Timer3) for the time base. The selected timer can use either an internal or external clock. Other operational features include: * Device wake-up from capture pin during CPU Sleep and Idle modes * Interrupt on input capture event * 4-word FIFO buffer for capture values - Interrupt optionally generated after 1, 2, 3 or 4 buffer locations are filled * Input capture can also be used to provide additional sources of external interrupts Note: Only IC1 and IC2 can trigger a DMA data transfer. If DMA data transfers are required, the FIFO buffer size must be set to 1 (ICI<1:0> = 00). FIGURE 14-1: INPUT CAPTURE BLOCK DIAGRAM From 16-bit Timers TMRy TMRz 16 16 1 Prescaler Counter (1, 4, 16) ICx Pin 3 Edge Detection Logic and Clock Synchronizer ICM<2:0> (ICxCON<2:0>) Mode Select ICOV, ICBNE (ICxCON<4:3>) FIFO R/W Logic 0 ICTMR (ICxCON<7>) ICxBUF ICxI<1:0> ICxCON Interrupt Logic System Bus Set Flag ICxIF (in IFSn Register) Note: An `x' in a signal, register or bit name denotes the number of the capture channel. 2009 Microchip Technology Inc. Preliminary DS70593B-page 175 FIFO dsPIC33FJXXXGPX06A/X08A/X10A 14.1 Input Capture Registers ICxCON: INPUT CAPTURE x CONTROL REGISTER U-0 -- R/W-0 ICSIDL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 R/W-0 R-0, HC ICOV R-0, HC ICBNE R/W-0 R/W-0 ICM<2:0> bit 0 R/W-0 REGISTER 14-1: U-0 -- bit 15 R/W-0 ICTMR(1) bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 ICI<1:0> W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown Unimplemented: Read as `0' ICSIDL: Input Capture Module Stop in Idle Control bit 1 = Input capture module will halt in CPU Idle mode 0 = Input capture module will continue to operate in CPU Idle mode Unimplemented: Read as `0' ICTMR: Input Capture Timer Select bits(1) 1 = TMR2 contents are captured on capture event 0 = TMR3 contents are captured on capture event ICI<1:0>: Select Number of Captures per Interrupt bits 11 = Interrupt on every fourth capture event 10 = Interrupt on every third capture event 01 = Interrupt on every second capture event 00 = Interrupt on every capture event ICOV: Input Capture Overflow Status Flag bit (read-only) 1 = Input capture overflow occurred 0 = No input capture overflow occurred ICBNE: Input Capture Buffer Empty Status bit (read-only) 1 = Input capture buffer is not empty, at least one more capture value can be read 0 = Input capture buffer is empty ICM<2:0>: Input Capture Mode Select bits 111 = Input capture functions as interrupt pin only when device is in Sleep or Idle mode (Rising edge detect only, all other control bits are not applicable.) 110 = Unused (module disabled) 101 = Capture mode, every 16th rising edge 100 = Capture mode, every 4th rising edge 011 = Capture mode, every rising edge 010 = Capture mode, every falling edge 001 = Capture mode, every edge (rising and falling) (ICI<1:0> bits do not control interrupt generation for this mode.) 000 = Input capture module turned off bit 12-8 bit 7 bit 6-5 bit 4 bit 3 bit 2-0 Note 1: Timer selections may vary. Refer to the device data sheet for details. DS70593B-page 176 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 15.0 OUTPUT COMPARE Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A families of devices. It is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 13. "Output Compare" (DS70209) of the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The output compare module can select either Timer2 or Timer3 for its time base. The module compares the value of the timer with the value of one or two Compare registers depending on the operating mode selected. The state of the output pin changes when the timer value matches the Compare register value. The output compare module generates either a single output pulse, or a sequence of output pulses, by changing the state of the output pin on the compare match events. The output compare module can also generate interrupts on compare match events. The output compare module has multiple operating modes: * * * * * * * Active-Low One-Shot mode Active-High One-Shot mode Toggle mode Delayed One-Shot mode Continuous Pulse mode PWM mode without Fault Protection PWM mode with Fault Protection FIGURE 15-1: OUTPUT COMPARE MODULE BLOCK DIAGRAM Set Flag bit OCxIF(1) OCxRS(1) OCxR(1) Output Logic 3 SQ R Output Enable OCx(1) Comparator 0 1 OCTSEL 0 1 OCM<2:0> Mode Select OCFA or OCFB(2) 16 16 TMR2 TMR3 TMR2 Rollover TMR3 Rollover Note 1: 2: An `x' in a signal, register or bit name denotes the number of the output compare channels. The OCFA pin controls OC1 through OC4. The OCFB pin controls OC5 through OC8. 2009 Microchip Technology Inc. Preliminary DS70593B-page 177 dsPIC33FJXXXGPX06A/X08A/X10A 15.1 Output Compare Modes Configure the Output Compare modes by setting the appropriate Output Compare Mode (OCM<2:0>) bits in the Output Compare Control (OCxCON<2:0>) register. Table 15-1 lists the different bit settings for the Output Compare modes. Figure 15-2 illustrates the output compare operation for various modes. The user application must disable the associated timer when writing to the Output Compare Control registers to avoid malfunctions. Note: See Section 13. "Output Compare" (DS70209) in the "dsPIC33F/PIC24H Family Reference Manual" for OCxR and OCxRS register restrictions. TABLE 15-1: OCM<2:0> 000 001 010 011 100 101 110 111 OUTPUT COMPARE MODES Mode Module Disabled Active-Low One-Shot Active-High One-Shot Toggle Delayed One-Shot Continuous Pulse PWM without Fault Protection PWM with Fault Protection OCx Pin Initial State Controlled by GPIO register 0 1 Current output is maintained 0 0 `0', if OCxR is zero `1', if OCxR is non-zero `0', if OCxR is zero `1', if OCxR is non-zero OCx rising edge OCx falling edge OCx rising and falling edge OCx falling edge OCx falling edge No interrupt OCFA falling edge for OC1 to OC4 OCx Interrupt Generation -- FIGURE 15-2: OUTPUT COMPARE OPERATION Output Compare Mode Enabled Timer is Reset on Period Match OCxRS TMRy OCxR Active-Low One-Shot (OCM = 001) Active-High One-Shot (OCM = 010) Toggle (OCM = 011) Delayed One-Shot (OCM = 100) Continuous Pulse (OCM = 101) PWM (OCM = 110 or 111) DS70593B-page 178 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 15-1: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 HC = Hardware Clearable bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R-0, HC OCFLT R/W-0 OCTSEL R/W-0 R/W-0 OCM<2:0> bit 0 OCxCON: OUTPUT COMPARE x CONTROL REGISTER (x = 1, 2) U-0 -- R/W-0 OCSIDL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 Unimplemented: Read as `0' OCSIDL: Stop Output Compare in Idle Mode Control bit 1 = Output Compare x halts in CPU Idle mode 0 = Output Compare x continues to operate in CPU Idle mode Unimplemented: Read as `0' OCFLT: PWM Fault Condition Status bit 1 = PWM Fault condition has occurred (cleared in hardware only) 0 = No PWM Fault condition has occurred (this bit is only used when OCM<2:0> = 111) OCTSEL: Output Compare Timer Select bit 1 = Timer3 is the clock source for Compare x 0 = Timer2 is the clock source for Compare x OCM<2:0>: Output Compare Mode Select bits 111 = PWM mode on OCx, Fault pin enabled 110 = PWM mode on OCx, Fault pin disabled 101 = Initialize OCx pin low, generate continuous output pulses on OCx pin 100 = Initialize OCx pin low, generate single output pulse on OCx pin 011 = Compare event toggles OCx pin 010 = Initialize OCx pin high, compare event forces OCx pin low 001 = Initialize OCx pin low, compare event forces OCx pin high 000 = Output compare channel is disabled bit 12-5 bit 4 bit 3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 179 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 180 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 16.0 SERIAL PERIPHERAL INTERFACE (SPI) The Serial Peripheral Interface (SPI) module is a synchronous serial interface useful for communicating with other peripheral or microcontroller devices. These peripheral devices may be serial EEPROMs, shift registers, display drivers, ADC, etc. The SPI module is compatible with SPI and SIOP from Motorola(R). Note: In this section, the SPI modules are referred to together as SPIx, or separately as SPI1 and SPI2. Special Function Registers will follow a similar notation. For example, SPIxCON refers to the control register for the SPI1 or SPI2 module. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 18. "Serial Peripheral Interface (SPI)" (DS70206) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. Each SPI module consists of a 16-bit shift register, SPIxSR (where x = 1 or 2), used for shifting data in and out, and a buffer register, SPIxBUF. A control register, SPIxCON, configures the module. Additionally, a status register, SPIxSTAT, indicates various status conditions. The serial interface consists of 4 pins: SDIx (serial data input), SDOx (serial data output), SCKx (shift clock input or output), and SSx (active-low slave select). In Master mode operation, SCK is a clock output but in Slave mode, it is a clock input. FIGURE 16-1: SCKx SPI MODULE BLOCK DIAGRAM 1:1 to 1:8 Secondary Prescaler Sync Control Control Clock Shift Control Select Edge 1:1/4/16/64 Primary Prescaler FCY SSx SPIxCON1<1:0> SPIxCON1<4:2> Enable Master Clock SPIxSR SDOx SDIx bit 0 Transfer Transfer SPIxRXB SPIxTXB SPIxBUF Read SPIxBUF Write SPIxBUF 16 Internal Data Bus 2009 Microchip Technology Inc. Preliminary DS70593B-page 181 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 16-1: R/W-0 SPIEN bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 C = Clearable bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 SPIROV U-0 -- U-0 -- U-0 -- U-0 -- R-0 SPITBF R-0 SPIRBF bit 0 SPIxSTAT: SPIx STATUS AND CONTROL REGISTER U-0 -- R/W-0 SPISIDL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 SPIEN: SPIx Enable bit 1 = Enables module and configures SCKx, SDOx, SDIx and SSx as serial port pins 0 = Disables module Unimplemented: Read as `0' SPISIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode Unimplemented: Read as `0' SPIROV: Receive Overflow Flag bit 1 = A new byte/word is completely received and discarded. The user software has not read the previous data in the SPIxBUF register 0 = No overflow has occurred Unimplemented: Read as `0' SPITBF: SPIx Transmit Buffer Full Status bit 1 = Transmit not yet started, SPIxTXB is full 0 = Transmit started, SPIxTXB is empty Automatically set in hardware when CPU writes SPIxBUF location, loading SPIxTXB. Automatically cleared in hardware when SPIx module transfers data from SPIxTXB to SPIxSR. SPIRBF: SPIx Receive Buffer Full Status bit 1 = Receive complete, SPIxRXB is full 0 = Receive is not complete, SPIxRXB is empty Automatically set in hardware when SPIx transfers data from SPIxSR to SPIxRXB. Automatically cleared in hardware when core reads SPIxBUF location, reading SPIxRXB. bit 14 bit 13 bit 12-7 bit 6 bit 5-2 bit 1 bit 0 DS70593B-page 182 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 16-2: U-0 -- bit 15 R/W-0 SSEN bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 bit 12 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown (3) SPIXCON1: SPIx CONTROL REGISTER 1 U-0 -- U-0 -- R/W-0 DISSCK R/W-0 DISSDO R/W-0 MODE16 R/W-0 SMP R/W-0 CKE(1) bit 8 R/W-0 bit 0 R/W-0 CKP R/W-0 MSTEN R/W-0 R/W-0 SPRE<2:0> (2) R/W-0 R/W-0 PPRE<1:0>(2) Unimplemented: Read as `0' DISSCK: Disable SCKx pin bit (SPI Master modes only) 1 = Internal SPI clock is disabled, pin functions as I/O 0 = Internal SPI clock is enabled DISSDO: Disable SDOx pin bit 1 = SDOx pin is not used by module; pin functions as I/O 0 = SDOx pin is controlled by the module MODE16: Word/Byte Communication Select bit 1 = Communication is word-wide (16 bits) 0 = Communication is byte-wide (8 bits) SMP: SPIx Data Input Sample Phase bit Master mode: 1 = Input data sampled at end of data output time 0 = Input data sampled at middle of data output time Slave mode: SMP must be cleared when SPIx is used in Slave mode. CKE: SPIx Clock Edge Select bit(1) 1 = Serial output data changes on transition from active clock state to Idle clock state (see bit 6) 0 = Serial output data changes on transition from Idle clock state to active clock state (see bit 6) SSEN: Slave Select Enable bit (Slave mode)(3) 1 = SSx pin used for Slave mode 0 = SSx pin not used by module. Pin controlled by port function CKP: Clock Polarity Select bit 1 = Idle state for clock is a high level; active state is a low level 0 = Idle state for clock is a low level; active state is a high level MSTEN: Master Mode Enable bit 1 = Master mode 0 = Slave mode bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 Note 1: The CKE bit is not used in the Framed SPI modes. The user should program this bit to `0' for the Framed SPI modes (FRMEN = 1). 2: Do not set both Primary and Secondary prescalers to a value of 1:1. 3: This bit must be cleared when FRMEN = 1. 2009 Microchip Technology Inc. Preliminary DS70593B-page 183 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 16-2: bit 4-2 SPIXCON1: SPIx CONTROL REGISTER 1 (CONTINUED) bit 1-0 SPRE<2:0>: Secondary Prescale bits (Master mode)(2) 111 = Secondary prescale 1:1 110 = Secondary prescale 2:1 * * * 000 = Secondary prescale 8:1 PPRE<1:0>: Primary Prescale bits (Master mode)(2) 11 = Primary prescale 1:1 10 = Primary prescale 4:1 01 = Primary prescale 16:1 00 = Primary prescale 64:1 Note 1: The CKE bit is not used in the Framed SPI modes. The user should program this bit to `0' for the Framed SPI modes (FRMEN = 1). 2: Do not set both Primary and Secondary prescalers to a value of 1:1. 3: This bit must be cleared when FRMEN = 1. DS70593B-page 184 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 16-3: R/W-0 FRMEN bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 FRMDLY U-0 -- bit 0 SPIxCON2: SPIx CONTROL REGISTER 2 R/W-0 R/W-0 FRMPOL U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 SPIFSD FRMEN: Framed SPIx Support bit 1 = Framed SPIx support enabled (SSx pin used as frame sync pulse input/output) 0 = Framed SPIx support disabled SPIFSD: Frame Sync Pulse Direction Control bit 1 = Frame sync pulse input (slave) 0 = Frame sync pulse output (master) FRMPOL: Frame Sync Pulse Polarity bit 1 = Frame sync pulse is active-high 0 = Frame sync pulse is active-low Unimplemented: Read as `0' FRMDLY: Frame Sync Pulse Edge Select bit 1 = Frame sync pulse coincides with first bit clock 0 = Frame sync pulse precedes first bit clock Unimplemented: Read as `0' This bit must not be set to `1' by the user application. bit 14 bit 13 bit 12-2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 185 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 186 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 17.0 INTER-INTEGRATED CIRCUITTM (I2CTM) 17.1 Operating Modes The hardware fully implements all the master and slave functions of the I2C Standard and Fast mode specifications, as well as 7 and 10-bit addressing. The I2C module can operate either as a slave or a master on an I2C bus. The following types of I2C operation are supported: * * * I2C slave operation with 7-bit address I2C slave operation with 10-bit address I2C master operation with 7 or 10-bit address Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 19. "Inter-Integrated CircuitTM (I2CTM)" (DS70195) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The Inter-Integrated Circuit (I2C) module provides complete hardware support for both Slave and Multi-Master modes of the I2C serial communication standard, with a 16-bit interface. The dsPIC33FJXXXGPX06A/X08A/X10A devices have up to two I2C interface modules, denoted as I2C1 and I2C2. Each I2C module has a 2-pin interface: the SCLx pin is clock and the SDAx pin is data. Each I2C module `x' (x = 1 or 2) offers the following key features: * I2C interface supporting both master and slave operation. * I2C Slave mode supports 7 and 10-bit address. * I2C Master mode supports 7 and 10-bit address. * I2C Port allows bidirectional transfers between master and slaves. * Serial clock synchronization for I2C port can be used as a handshake mechanism to suspend and resume serial transfer (SCLREL control). * I2C supports multi-master operation; detects bus collision and will arbitrate accordingly. For details about the communication sequence in each of these modes, please refer to the "dsPIC33F/PIC24H Family Reference Manual". 17.2 I2C Registers I2CxCON and I2CxSTAT are control and status registers, respectively. The I2CxCON register is readable and writable. The lower six bits of I2CxSTAT are read-only. The remaining bits of the I2CSTAT are read/write. I2CxRSR is the shift register used for shifting data, whereas I2CxRCV is the buffer register to which data bytes are written, or from which data bytes are read. I2CxRCV is the receive buffer. I2CxTRN is the transmit register to which bytes are written during a transmit operation. The I2CxADD register holds the slave address. A status bit, ADD10, indicates 10-bit Address mode. The I2CxBRG acts as the Baud Rate Generator (BRG) reload value. In receive operations, I2CxRSR and I2CxRCV together form a double-buffered receiver. When I2CxRSR receives a complete byte, it is transferred to I2CxRCV and an interrupt pulse is generated. 2009 Microchip Technology Inc. Preliminary DS70593B-page 187 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 17-1: I2CTM BLOCK DIAGRAM (X = 1 OR 2) Internal Data Bus I2CxRCV Read SCLx Shift Clock I2CxRSR LSb SDAx Match Detect Address Match Write I2CxMSK Write Read I2CxADD Read Start and Stop Bit Detect Write Start and Stop Bit Generation Control Logic I2CxSTAT Read Write Collision Detect I2CxCON Read Acknowledge Generation Clock Stretching Write I2CxTRN LSb Shift Clock Reload Control Read Write I2CxBRG Read BRG Down Counter TCY/2 DS70593B-page 188 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 17-1: R/W-0 I2CEN bit 15 R/W-0 GCEN bit 7 Legend: R = Readable bit -n = Value at POR bit 15 U = Unimplemented bit, read as `0' W = Writable bit `1' = Bit is set HS = Set in hardware `0' = Bit is cleared HC = Cleared in hardware x = Bit is unknown R/W-0 STREN R/W-0 ACKDT R/W-0 HC ACKEN R/W-0 HC RCEN R/W-0 HC PEN R/W-0 HC RSEN I2CxCON: I2Cx CONTROL REGISTER U-0 -- R/W-0 I2CSIDL R/W-1 HC SCLREL R/W-0 IPMIEN R/W-0 A10M R/W-0 DISSLW R/W-0 SMEN bit 8 R/W-0 HC SEN bit 0 I2CEN: I2Cx Enable bit 1 = Enables the I2Cx module and configures the SDAx and SCLx pins as serial port pins 0 = Disables the I2Cx module. All I2C pins are controlled by port functions Unimplemented: Read as `0' I2CSIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters an Idle mode 0 = Continue module operation in Idle mode SCLREL: SCLx Release Control bit (when operating as I2C slave) 1 = Release SCLx clock 0 = Hold SCLx clock low (clock stretch) If STREN = 1: Bit is R/W (i.e., software may write `0' to initiate stretch and write `1' to release clock). Hardware clear at beginning of slave transmission. Hardware clear at end of slave reception. If STREN = 0: Bit is R/S (i.e., software may only write `1' to release clock). Hardware clear at beginning of slave transmission. IPMIEN: Intelligent Peripheral Management Interface (IPMI) Enable bit 1 = IPMI mode is enabled; all addresses Acknowledged 0 = IPMI mode disabled A10M: 10-bit Slave Address bit 1 = I2CxADD is a 10-bit slave address 0 = I2CxADD is a 7-bit slave address DISSLW: Disable Slew Rate Control bit 1 = Slew rate control disabled 0 = Slew rate control enabled SMEN: SMBus Input Levels bit 1 = Enable I/O pin thresholds compliant with SMBus specification 0 = Disable SMBus input thresholds GCEN: General Call Enable bit (when operating as I2C slave) 1 = Enable interrupt when a general call address is received in the I2CxRSR (module is enabled for reception) 0 = General call address disabled STREN: SCLx Clock Stretch Enable bit (when operating as I2C slave) Used in conjunction with SCLREL bit. 1 = Enable software or receive clock stretching 0 = Disable software or receive clock stretching bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 2009 Microchip Technology Inc. Preliminary DS70593B-page 189 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 17-1: bit 5 I2CxCON: I2Cx CONTROL REGISTER (CONTINUED) ACKDT: Acknowledge Data bit (when operating as I2C master, applicable during master receive) Value that will be transmitted when the software initiates an Acknowledge sequence. 1 = Send NACK during Acknowledge 0 = Send ACK during Acknowledge ACKEN: Acknowledge Sequence Enable bit (when operating as I2C master, applicable during master receive) 1 = Initiate Acknowledge sequence on SDAx and SCLx pins and transmit ACKDT data bit. Hardware clear at end of master Acknowledge sequence 0 = Acknowledge sequence not in progress RCEN: Receive Enable bit (when operating as I2C master) 1 = Enables Receive mode for I2C. Hardware clear at end of eighth bit of master receive data byte 0 = Receive sequence not in progress PEN: Stop Condition Enable bit (when operating as I2C master) 1 = Initiate Stop condition on SDAx and SCLx pins. Hardware clear at end of master Stop sequence 0 = Stop condition not in progress RSEN: Repeated Start Condition Enable bit (when operating as I2C master) 1 = Initiate Repeated Start condition on SDAx and SCLx pins. Hardware clear at end of master Repeated Start sequence 0 = Repeated Start condition not in progress SEN: Start Condition Enable bit (when operating as I2C master) 1 = Initiate Start condition on SDAx and SCLx pins. Hardware clear at end of master Start sequence 0 = Start condition not in progress bit 4 bit 3 bit 2 bit 1 bit 0 DS70593B-page 190 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 17-2: R-0 HSC ACKSTAT bit 15 R/C-0 HS IWCOL bit 7 Legend: R = Readable bit -n = Value at POR bit 15 U = Unimplemented bit, read as `0' W = Writable bit `1' = Bit is set HS = Set in hardware `0' = Bit is cleared C = Clear only bit HSC = Hardware set/cleared x = Bit is unknown R/C-0 HS I2COV R-0 HSC D_A R/C-0 HSC P R/C-0 HSC S R-0 HSC R_W R-0 HSC RBF I2CxSTAT: I2Cx STATUS REGISTER U-0 -- U-0 -- U-0 -- R/C-0 HS BCL R-0 HSC GCSTAT R-0 HSC ADD10 bit 8 R-0 HSC TBF bit 0 R-0 HSC TRSTAT ACKSTAT: Acknowledge Status bit (when operating as I2C master, applicable to master transmit operation) 1 = NACK received from slave 0 = ACK received from slave Hardware set or clear at end of slave Acknowledge. TRSTAT: Transmit Status bit (when operating as I2C master, applicable to master transmit operation) 1 = Master transmit is in progress (8 bits + ACK) 0 = Master transmit is not in progress Hardware set at beginning of master transmission. Hardware clear at end of slave Acknowledge. Unimplemented: Read as `0' BCL: Master Bus Collision Detect bit 1 = A bus collision has been detected during a master operation 0 = No collision Hardware set at detection of bus collision. GCSTAT: General Call Status bit 1 = General call address was received 0 = General call address was not received Hardware set when address matches general call address. Hardware clear at Stop detection. ADD10: 10-Bit Address Status bit 1 = 10-bit address was matched 0 = 10-bit address was not matched Hardware set at match of 2nd byte of matched 10-bit address. Hardware clear at Stop detection. IWCOL: Write Collision Detect bit 1 = An attempt to write the I2CxTRN register failed because the I2C module is busy 0 = No collision Hardware set at occurrence of write to I2CxTRN while busy (cleared by software). I2COV: Receive Overflow Flag bit 1 = A byte was received while the I2CxRCV register is still holding the previous byte 0 = No overflow Hardware set at attempt to transfer I2CxRSR to I2CxRCV (cleared by software). D_A: Data/Address bit (when operating as I2C slave) 1 = Indicates that the last byte received was data 0 = Indicates that the last byte received was device address Hardware clear at device address match. Hardware set by reception of slave byte. P: Stop bit 1 = Indicates that a Stop bit has been detected last 0 = Stop bit was not detected last Hardware set or clear when Start, Repeated Start or Stop detected. bit 14 bit 13-11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 2009 Microchip Technology Inc. Preliminary DS70593B-page 191 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 17-2: bit 3 I2CxSTAT: I2Cx STATUS REGISTER (CONTINUED) S: Start bit 1 = Indicates that a Start (or Repeated Start) bit has been detected last 0 = Start bit was not detected last Hardware set or clear when Start, Repeated Start or Stop detected. R_W: Read/Write Information bit (when operating as I2C slave) 1 = Read - indicates data transfer is output from slave 0 = Write - indicates data transfer is input to slave Hardware set or clear after reception of I 2C device address byte. RBF: Receive Buffer Full Status bit 1 = Receive complete, I2CxRCV is full 0 = Receive not complete, I2CxRCV is empty Hardware set when I2CxRCV is written with received byte. Hardware clear when software reads I2CxRCV. TBF: Transmit Buffer Full Status bit 1 = Transmit in progress, I2CxTRN is full 0 = Transmit complete, I2CxTRN is empty Hardware set when software writes I2CxTRN. Hardware clear at completion of data transmission. bit 2 bit 1 bit 0 DS70593B-page 192 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 17-3: U-0 -- bit 15 R/W-0 AMSK7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-10 bit 9-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 AMSK6 R/W-0 AMSK5 R/W-0 AMSK4 R/W-0 AMSK3 R/W-0 AMSK2 R/W-0 AMSK1 I2CxMSK: I2Cx SLAVE MODE ADDRESS MASK REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 AMSK9 R/W-0 AMSK8 bit 8 R/W-0 AMSK0 bit 0 Unimplemented: Read as `0' AMSKx: Mask for Address Bit x Select bit 1 = Enable masking for bit x of incoming message address; bit match not required in this position 0 = Disable masking for bit x; bit match required in this position 2009 Microchip Technology Inc. Preliminary DS70593B-page 193 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 194 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 18.0 UNIVERSAL ASYNCHRONOUS RECEIVER TRANSMITTER (UART) * Full-Duplex, 8 or 9-bit Data Transmission through the UxTX and UxRX pins * Even, Odd or No Parity Options (for 8-bit data) * One or Two Stop bits * Hardware Flow Control Option with UxCTS and UxRTS pins * Fully Integrated Baud Rate Generator with 16-bit Prescaler * Baud rates ranging from 10 Mbps to 38 bps at 40 MIPS * 4-deep First-In-First-Out (FIFO) Transmit Data Buffer * 4-Deep FIFO Receive Data Buffer * Parity, Framing and Buffer Overrun Error Detection * Support for 9-bit mode with Address Detect (9th bit = 1) * Transmit and Receive Interrupts * A Separate Interrupt for all UART Error Conditions * Loopback mode for Diagnostic Support * Support for Sync and Break Characters * Supports Automatic Baud Rate Detection * IrDA(R) Encoder and Decoder Logic * 16x Baud Clock Output for IrDA(R) Support A simplified block diagram of the UART is shown in Figure 18-1. The UART module consists of the key important hardware elements: * Baud Rate Generator * Asynchronous Transmitter * Asynchronous Receiver Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 17. "UART" (DS70188) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The Universal Asynchronous Receiver Transmitter (UART) module is one of the serial I/O modules available in the dsPIC33FJXXXGPX06A/X08A/X10A device family. The UART is a full-duplex asynchronous system that can communicate with peripheral devices, such as personal computers, LIN, RS-232 and RS-485 interfaces. The module also supports a hardware flow control option with the UxCTS and UxRTS pins and also includes an IrDA(R) encoder and decoder. The primary features of the UART module are: FIGURE 18-1: UART SIMPLIFIED BLOCK DIAGRAM Baud Rate Generator IrDA(R) BCLK Hardware Flow Control UxRTS UxCTS UART Receiver UxRX UART Transmitter UxTX Note 1: Both UART1 and UART2 can trigger a DMA data transfer. If U1TX, U1RX, U2TX or U2RX is selected as a DMA IRQ source, a DMA transfer occurs when the U1TXIF, U1RXIF, U2TXIF or U2RXIF bit gets set as a result of a UART1 or UART2 transmission or reception. 2: If DMA transfers are required, the UART TX/RX FIFO buffer must be set to a size of 1 byte/word (i.e., UTXISEL<1:0> = 00 and URXISEL<1:0> = 00). 2009 Microchip Technology Inc. Preliminary DS70593B-page 195 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 18-1: R/W-0 UARTEN(1) bit 15 R/W-0 HC WAKE bit 7 Legend: R = Readable bit -n = Value at POR bit 15 HC = Hardware cleared W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 LPBACK R/W-0 HC ABAUD R/W-0 URXINV R/W-0 BRGH R/W-0 R/W-0 UxMODE: UARTx MODE REGISTER U-0 -- R/W-0 USIDL R/W-0 IREN(2) R/W-0 RTSMD U-0 -- R/W-0 R/W-0 bit 8 R/W-0 STSEL bit 0 UEN<1:0> PDSEL<1:0> UARTEN: UARTx Enable bit(1) 1 = UARTx is enabled; all UARTx pins are controlled by UARTx as defined by UEN<1:0> 0 = UARTx is disabled; all UARTx pins are controlled by port latches; UARTx power consumption minimal Unimplemented: Read as `0' USIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode IREN: IrDA(R) Encoder and Decoder Enable bit(2) 1 = IrDA(R) encoder and decoder enabled 0 = IrDA(R) encoder and decoder disabled RTSMD: Mode Selection for UxRTS Pin bit 1 = UxRTS pin in Simplex mode 0 = UxRTS pin in Flow Control mode Unimplemented: Read as `0' UEN<1:0>: UARTx Enable bits 11 = UxTX, UxRX and BCLK pins are enabled and used; UxCTS pin controlled by port latches 10 = UxTX, UxRX, UxCTS and UxRTS pins are enabled and used 01 = UxTX, UxRX and UxRTS pins are enabled and used; UxCTS pin controlled by port latches 00 = UxTX and UxRX pins are enabled and used; UxCTS and UxRTS/BCLK pins controlled by port latches WAKE: Wake-up on Start bit Detect During Sleep Mode Enable bit 1 = UARTx will continue to sample the UxRX pin; interrupt generated on falling edge; bit cleared in hardware on following rising edge 0 = No wake-up enabled LPBACK: UARTx Loopback Mode Select bit 1 = Enable Loopback mode 0 = Loopback mode is disabled ABAUD: Auto-Baud Enable bit 1 = Enable baud rate measurement on the next character - requires reception of a Sync field (55h) before other data; cleared in hardware upon completion 0 = Baud rate measurement disabled or completed bit 14 bit 13 bit 12 bit 11 bit 10 bit 9-8 bit 7 bit 6 bit 5 Note 1: Refer to Section 17. "UART" (DS70188) in the "dsPIC33F/PIC24H Family Reference Manual" for information on enabling the UART module for receive or transmit operation. 2: This feature is only available for the 16x BRG mode (BRGH = 0). DS70593B-page 196 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 18-1: bit 4 UxMODE: UARTx MODE REGISTER (CONTINUED) URXINV: Receive Polarity Inversion bit 1 = UxRX Idle state is `0' 0 = UxRX Idle state is `1' BRGH: High Baud Rate Enable bit 1 = BRG generates 4 clocks per bit period (4x baud clock, High-Speed mode) 0 = BRG generates 16 clocks per bit period (16x baud clock, Standard mode) PDSEL<1:0>: Parity and Data Selection bits 11 = 9-bit data, no parity 10 = 8-bit data, odd parity 01 = 8-bit data, even parity 00 = 8-bit data, no parity STSEL: Stop Bit Selection bit 1 = Two Stop bits 0 = One Stop bit bit 3 bit 2-1 bit 0 Note 1: Refer to Section 17. "UART" (DS70188) in the "dsPIC33F/PIC24H Family Reference Manual" for information on enabling the UART module for receive or transmit operation. 2: This feature is only available for the 16x BRG mode (BRGH = 0). 2009 Microchip Technology Inc. Preliminary DS70593B-page 197 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 18-2: R/W-0 UTXISEL1 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15,13 HC = Hardware cleared W = Writable bit `1' = Bit is set C = Clear only bit U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 ADDEN R-1 RIDLE R-0 PERR R-0 FERR R/C-0 OERR R-0 URXDA bit 0 UxSTA: UARTx STATUS AND CONTROL REGISTER R/W-0 R/W-0 UTXISEL0 U-0 -- R/W-0 HC UTXBRK R/W-0 UTXEN (1) R-0 UTXBF R-1 TRMT bit 8 UTXINV URXISEL<1:0> UTXISEL<1:0>: Transmission Interrupt Mode Selection bits 11 = Reserved; do not use 10 = Interrupt when a character is transferred to the Transmit Shift Register, and as a result, the transmit buffer becomes empty 01 = Interrupt when the last character is shifted out of the Transmit Shift Register; all transmit operations are completed 00 = Interrupt when a character is transferred to the Transmit Shift Register (this implies there is at least one character open in the transmit buffer) UTXINV: Transmit Polarity Inversion bit If IREN = 0: 1 = UxTX Idle state is `0' 0 = UxTX Idle state is `1' If IREN = 1: 1 = IrDA(R) encoded UxTX Idle state is `1' 0 = IrDA(R) encoded UxTX Idle state is `0' bit 14 bit 12 bit 11 Unimplemented: Read as `0' UTXBRK: Transmit Break bit 1 = Send Sync Break on next transmission - Start bit, followed by twelve `0' bits, followed by Stop bit; cleared by hardware upon completion 0 = Sync Break transmission disabled or completed UTXEN: Transmit Enable bit(1) 1 = Transmit enabled, UxTX pin controlled by UARTx 0 = Transmit disabled, any pending transmission is aborted and buffer is reset. UxTX pin controlled by port UTXBF: Transmit Buffer Full Status bit (read-only) 1 = Transmit buffer is full 0 = Transmit buffer is not full, at least one more character can be written TRMT: Transmit Shift Register Empty bit (read-only) 1 = Transmit Shift Register is empty and transmit buffer is empty (the last transmission has completed) 0 = Transmit Shift Register is not empty, a transmission is in progress or queued URXISEL<1:0>: Receive Interrupt Mode Selection bits 11 = Interrupt is set on UxRSR transfer making the receive buffer full (i.e., has 4 data characters) 10 = Interrupt is set on UxRSR transfer making the receive buffer 3/4 full (i.e., has 3 data characters) 0x = Interrupt is set when any character is received and transferred from the UxRSR to the receive buffer. Receive buffer has one or more characters bit 10 bit 9 bit 8 bit 7-6 Note 1: Refer to Section 17. "UART" (DS70188) in the "dsPIC33F/PIC24H Family Reference Manual" for information on enabling the UART module for transmit operation. DS70593B-page 198 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 18-2: bit 5 UxSTA: UARTx STATUS AND CONTROL REGISTER (CONTINUED) ADDEN: Address Character Detect bit (bit 8 of received data = 1) 1 = Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect 0 = Address Detect mode disabled RIDLE: Receiver Idle bit (read-only) 1 = Receiver is Idle 0 = Receiver is active PERR: Parity Error Status bit (read-only) 1 = Parity error has been detected for the current character (character at the top of the receive FIFO) 0 = Parity error has not been detected FERR: Framing Error Status bit (read-only) 1 = Framing error has been detected for the current character (character at the top of the receive FIFO) 0 = Framing error has not been detected OERR: Receive Buffer Overrun Error Status bit (read/clear only) 1 = Receive buffer has overflowed 0 = Receive buffer has not overflowed. Clearing a previously set OERR bit (1 0 transition) will reset the receiver buffer and the UxRSR to the empty state URXDA: Receive Buffer Data Available bit (read-only) 1 = Receive buffer has data, at least one more character can be read 0 = Receive buffer is empty bit 4 bit 3 bit 2 bit 1 bit 0 Note 1: Refer to Section 17. "UART" (DS70188) in the "dsPIC33F/PIC24H Family Reference Manual" for information on enabling the UART module for transmit operation. 2009 Microchip Technology Inc. Preliminary DS70593B-page 199 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 200 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 19.0 ENHANCED CAN (ECANTM) MODULE Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 21. "Enhanced Controller Area Network (ECANTM)" (DS70185) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. * Signaling via interrupt capabilities for all CAN receiver and transmitter error states * Programmable clock source * Programmable link to input capture module (IC2 for both CAN1 and CAN2) for time-stamping and network synchronization * Low-power Sleep and Idle mode The CAN bus module consists of a protocol engine and message buffering/control. The CAN protocol engine handles all functions for receiving and transmitting messages on the CAN bus. Messages are transmitted by first loading the appropriate data registers. Status and errors can be checked by reading the appropriate registers. Any message detected on the CAN bus is checked for errors and then matched against filters to see if it should be received and stored in one of the receive registers. 19.2 Frame Types 19.1 Overview The Enhanced Controller Area Network (ECAN) module is a serial interface, useful for communicating with other CAN modules or microcontroller devices. This interface/protocol was designed to allow communications within noisy environments. The dsPIC33FJXXXGPX06A/X08A/X10A devices contain up to two ECAN modules. The CAN module is a communication controller implementing the CAN 2.0 A/B protocol, as defined in the BOSCH specification. The module will support CAN 1.2, CAN 2.0A, CAN 2.0B Passive and CAN 2.0B Active versions of the protocol. The module implementation is a full CAN system. The CAN specification is not covered within this data sheet. The reader may refer to the BOSCH CAN specification for further details. The module features are as follows: * Implementation of the CAN protocol, CAN 1.2, CAN 2.0A and CAN 2.0B * Standard and extended data frames * 0-8 bytes data length * Programmable bit rate up to 1 Mbit/sec * Automatic response to remote transmission requests * Up to eight transmit buffers with application specified prioritization and abort capability (each buffer may contain up to 8 bytes of data) * Up to 32 receive buffers (each buffer may contain up to 8 bytes of data) * Up to 16 full (standard/extended identifier) acceptance filters * Three full acceptance filter masks * DeviceNetTM addressing support * Programmable wake-up functionality with integrated low-pass filter * Programmable Loopback mode supports self-test operation The CAN module transmits various types of frames which include data messages, or remote transmission requests initiated by the user, as other frames that are automatically generated for control purposes. The following frame types are supported: * Standard Data Frame: A standard data frame is generated by a node when the node wishes to transmit data. It includes an 11-bit Standard Identifier (SID), but not an 18-bit Extended Identifier (EID). * Extended Data Frame: An extended data frame is similar to a standard data frame, but also includes an extended identifier. * Remote Frame: It is possible for a destination node to request the data from the source. For this purpose, the destination node sends a remote frame with an identifier that matches the identifier of the required data frame. The appropriate data source node will then send a data frame as a response to this remote request. * Error Frame: An error frame is generated by any node that detects a bus error. An error frame consists of two fields: an error flag field and an error delimiter field. * Overload Frame: An overload frame can be generated by a node as a result of two conditions. First, the node detects a dominant bit during interframe space which is an illegal condition. Second, due to internal conditions, the node is not yet able to start reception of the next message. A node may generate a maximum of two sequential overload frames to delay the start of the next message. * Interframe Space: Interframe space separates a proceeding frame (of whatever type) from a following data or remote frame. 2009 Microchip Technology Inc. Preliminary DS70593B-page 201 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 19-1: ECANTM MODULE BLOCK DIAGRAM RXF15 Filter RXF14 Filter RXF13 Filter RXF12 Filter DMA Controller RXF11 Filter RXF10 Filter RXF9 Filter RXF8 Filter TRB7 TX/RX Buffer Control Register TRB6 TX/RX Buffer Control Register TRB5 TX/RX Buffer Control Register TRB4 TX/RX Buffer Control Register TRB3 TX/RX Buffer Control Register TRB2 TX/RX Buffer Control Register TRB1 TX/RX Buffer Control Register TRB0 TX/RX Buffer Control Register RXF7 Filter RXF6 Filter RXF5 Filter RXF4 Filter RXF3 Filter RXF2 Filter RXF1 Filter RXF0 Filter RXM2 Mask RXM1 Mask RXM0 Mask Transmit Byte Sequencer Message Assembly Buffer Control Configuration Logic CAN Protocol Engine CPU Bus Interrupts CiTX(1) CiRX(1) Note 1: i = 1 or 2 refers to a particular ECANTM module (ECAN1 or ECAN2). DS70593B-page 202 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 19.3 Modes of Operation Note: The CAN module can operate in one of several operation modes selected by the user. These modes include: * * * * * * Initialization Mode Disable Mode Normal Operation Mode Listen Only Mode Listen All Messages Mode Loopback Mode Typically, if the CAN module is allowed to transmit in a particular mode of operation and a transmission is requested immediately after the CAN module has been placed in that mode of operation, the module waits for 11 consecutive recessive bits on the bus before starting transmission. If the user switches to Disable mode within this 11-bit period, then this transmission is aborted and the corresponding TXABT bit is set and TXREQ bit is cleared. Modes are requested by setting the REQOP<2:0> bits (CiCTRL1<10:8>). Entry into a mode is Acknowledged by monitoring the OPMODE<2:0> bits (CiCTRL1<7:5>). The module will not change the mode and the OPMODE bits until a change in mode is acceptable, generally during bus Idle time, which is defined as at least 11 consecutive recessive bits. 19.3.3 NORMAL OPERATION MODE 19.3.1 INITIALIZATION MODE Normal Operation mode is selected when REQOP<2:0> = 000. In this mode, the module is activated and the I/O pins will assume the CAN bus functions. The module will transmit and receive CAN bus messages via the CiTX and CiRX pins. In the Initialization mode, the module will not transmit or receive. The error counters are cleared and the interrupt flags remain unchanged. The programmer will have access to Configuration registers that are access restricted in other modes. The module will protect the user from accidentally violating the CAN protocol through programming errors. All registers which control the configuration of the module can not be modified while the module is on-line. The CAN module will not be allowed to enter the Configuration mode while a transmission is taking place. The Configuration mode serves as a lock to protect the following registers: * * * * * All Module Control Registers Baud Rate and Interrupt Configuration Registers Bus Timing Registers Identifier Acceptance Filter Registers Identifier Acceptance Mask Registers 19.3.4 LISTEN ONLY MODE If the Listen Only mode is activated, the module on the CAN bus is passive. The transmitter buffers revert to the port I/O function. The receive pins remain inputs. For the receiver, no error flags or Acknowledge signals are sent. The error counters are deactivated in this state. The Listen Only mode can be used for detecting the baud rate on the CAN bus. To use this, it is necessary that there are at least two further nodes that communicate with each other. 19.3.5 LISTEN ALL MESSAGES MODE 19.3.2 DISABLE MODE The module can be set to ignore all errors and receive any message. The Listen All Messages mode is activated by setting REQOP<2:0> = `111'. In this mode, the data which is in the message assembly buffer, until the time an error occurred, is copied in the receive buffer and can be read via the CPU interface. In Disable mode, the module will not transmit or receive. The module has the ability to set the WAKIF bit due to bus activity, however, any pending interrupts will remain and the error counters will retain their value. If the REQOP<2:0> bits (CiCTRL1<10:8>) = 001, the module will enter the Module Disable mode. If the module is active, the module will wait for 11 recessive bits on the CAN bus, detect that condition as an Idle bus, then accept the module disable command. When the OPMODE<2:0> bits (CiCTRL1<7:5>) = 001, that indicates whether the module successfully went into Module Disable mode. The I/O pins will revert to normal I/O function when the module is in the Module Disable mode. The module can be programmed to apply a low-pass filter function to the CiRX input line while the module or the CPU is in Sleep mode. The WAKFIL bit (CiCFG2<14>) enables or disables the filter. 19.3.6 LOOPBACK MODE If the Loopback mode is activated, the module will connect the internal transmit signal to the internal receive signal at the module boundary. The transmit and receive pins revert to their port I/O function. 2009 Microchip Technology Inc. Preliminary DS70593B-page 203 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-1: U-0 -- bit 15 R-1 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared r = Bit is Reserved R-0 OPMODE<2:0> R-0 U-0 -- R/W-0 CANCAP U-0 -- U-0 -- CiCTRL1: ECANTM CONTROL REGISTER 1 U-0 -- R/W-0 CSIDL R/W-0 ABAT r-0 -- R/W-1 R/W-0 REQOP<2:0> bit 8 R/W-0 WIN bit 0 R/W-0 Unimplemented: Read as `0' CSIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode ABAT: Abort All Pending Transmissions bit Signal all transmit buffers to abort transmission. Module will clear this bit when all transmissions are aborted Reserved: Do not use REQOP<2:0>: Request Operation Mode bits 000 = Set Normal Operation mode 001 = Set Disable mode 010 = Set Loopback mode 011 = Set Listen Only Mode 100 = Set Configuration mode 101 = Reserved - do not use 110 = Reserved - do not use 111 = Set Listen All Messages mode OPMODE<2:0>: Operation Mode bits 000 = Module is in Normal Operation mode 001 = Module is in Disable mode 010 = Module is in Loopback mode 011 = Module is in Listen Only mode 100 = Module is in Configuration mode 101 = Reserved 110 = Reserved 111 = Module is in Listen All Messages mode Unimplemented: Read as `0' CANCAP: CAN Message Receive Timer Capture Event Enable bit 1 = Enable input capture based on CAN message receive 0 = Disable CAN capture Unimplemented: Read as `0' WIN: SFR Map Window Select bit 1 = Use filter window 0 = Use buffer window bit 12 bit 11 bit 10-8 bit 7-5 bit 4 bit 3 bit 2-1 bit 0 DS70593B-page 204 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-2: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-5 bit 4-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R-0 R-0 R-0 DNCNT<4:0> bit 0 R-0 R-0 CiCTRL2: ECANTM CONTROL REGISTER 2 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 Unimplemented: Read as `0' DNCNT<4:0>: DeviceNetTM Filter Bit Number bits 10010-11111 = Invalid selection 10001 = Compare up to data byte 3, bit 6 with EID<17> * * * 00001 = Compare up to data byte 1, bit 7 with EID<0> 00000 = Do not compare data bytes 2009 Microchip Technology Inc. Preliminary DS70593B-page 205 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-3: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 bit 12-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-1 R-0 R-0 R-0 ICODE<6:0> bit 0 R-0 R-0 R-0 CiVEC: ECANTM INTERRUPT CODE REGISTER U-0 -- U-0 -- R-0 R-0 R-0 FILHIT<4:0> bit 8 R-0 R-0 Unimplemented: Read as `0' FILHIT<4:0>: Filter Hit Number bits 10000-11111 = Reserved 01111 = Filter 15 * * * 00001 = Filter 1 00000 = Filter 0 bit 7 bit 6-0 Unimplemented: Read as `0' ICODE<6:0>: Interrupt Flag Code bits 1000101-1111111 = Reserved 1000100 = FIFO almost full interrupt 1000011 = Receiver overflow interrupt 1000010 = Wake-up interrupt 1000001 = Error interrupt 1000000 = No interrupt 0010000-0111111 = Reserved 0001111 = RB15 buffer Interrupt * * * 0001001 = RB9 buffer interrupt 0001000 = RB8 buffer interrupt 0000111 = TRB7 buffer interrupt 0000110 = TRB6 buffer interrupt 0000101 = TRB5 buffer interrupt 0000100 = TRB4 buffer interrupt 0000011 = TRB3 buffer interrupt 0000010 = TRB2 buffer interrupt 0000001 = TRB1 buffer interrupt 0000000 = TRB0 Buffer interrupt DS70593B-page 206 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-4: R/W-0 bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 FSA<4:0> bit 0 R/W-0 CiFCTRL: ECANTM FIFO CONTROL REGISTER R/W-0 R/W-0 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 DMABS<2:0> DMABS<2:0>: DMA Buffer Size bits 111 = Reserved 110 = 32 buffers in DMA RAM 101 = 24 buffers in DMA RAM 100 = 16 buffers in DMA RAM 011 = 12 buffers in DMA RAM 010 = 8 buffers in DMA RAM 001 = 6 buffers in DMA RAM 000 = 4 buffers in DMA RAM Unimplemented: Read as `0' FSA<4:0>: FIFO Area Starts with Buffer bits 11111 = RB31 buffer 11110 = RB30 buffer * * * bit 12-5 bit 4-0 00001 = TRB1 buffer 00000 = TRB0 buffer 2009 Microchip Technology Inc. Preliminary DS70593B-page 207 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-5: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- R-0 R-0 R-0 R-0 FNRB<5:0> bit 0 R-0 R-0 CiFIFO: ECANTM FIFO STATUS REGISTER U-0 -- R-0 R-0 R-0 R-0 FBP<5:0> bit 8 R-0 R-0 Unimplemented: Read as `0' FBP<5:0>: FIFO Write Buffer Pointer bits 011111 = RB31 buffer 011110 = RB30 buffer * * * 000001 = TRB1 buffer 000000 = TRB0 buffer bit 7-6 bit 5-0 Unimplemented: Read as `0' FNRB<5:0>: FIFO Next Read Buffer Pointer bits 011111 = RB31 buffer 011110 = RB30 buffer * * * 000001 = TRB1 buffer 000000 = TRB0 buffer DS70593B-page 208 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-6: U-0 -- bit 15 R/C-0 IVRIF bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 WAKIF R/C-0 ERRIF U-0 -- R/C-0 FIFOIF R/C-0 RBOVIF R/C-0 RBIF CiINTF: ECANTM INTERRUPT FLAG REGISTER U-0 -- R-0 TXBO R-0 TXBP R-0 RXBP R-0 TXWAR R-0 RXWAR R-0 EWARN bit 8 R/C-0 TBIF bit 0 Unimplemented: Read as `0' TXBO: Transmitter in Error State Bus Off bit TXBP: Transmitter in Error State Bus Passive bit RXBP: Receiver in Error State Bus Passive bit TXWAR: Transmitter in Error State Warning bit RXWAR: Receiver in Error State Warning bit EWARN: Transmitter or Receiver in Error State Warning bit IVRIF: Invalid Message Received Interrupt Flag bit WAKIF: Bus Wake-up Activity Interrupt Flag bit ERRIF: Error Interrupt Flag bit (multiple sources in CiINTF<13:8> register) Unimplemented: Read as `0' FIFOIF: FIFO Almost Full Interrupt Flag bit RBOVIF: RX Buffer Overflow Interrupt Flag bit RBIF: RX Buffer Interrupt Flag bit TBIF: TX Buffer Interrupt Flag bit 2009 Microchip Technology Inc. Preliminary DS70593B-page 209 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-7: U-0 -- bit 15 R/W-0 IVRIE bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 WAKIE R/W-0 ERRIE U-0 -- R/W-0 FIFOIE R/W-0 RBOVIE R/W-0 RBIE CiINTE: ECANTM INTERRUPT ENABLE REGISTER U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 TBIE bit 0 Unimplemented: Read as `0' IVRIE: Invalid Message Received Interrupt Enable bit WAKIE: Bus Wake-up Activity Interrupt Flag bit ERRIE: Error Interrupt Enable bit Unimplemented: Read as `0' FIFOIE: FIFO Almost Full Interrupt Enable bit RBOVIE: RX Buffer Overflow Interrupt Enable bit RBIE: RX Buffer Interrupt Enable bit TBIE: TX Buffer Interrupt Enable bit DS70593B-page 210 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-8: R-0 bit 15 R-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-0 R-0 R-0 R-0 R-0 R-0 R-0 bit 0 CiEC: ECANTM TRANSMIT/RECEIVE ERROR COUNT REGISTER R-0 R-0 R-0 R-0 R-0 R-0 R-0 bit 8 TERRCNT<7:0> RERRCNT<7:0> TERRCNT<7:0>: Transmit Error Count bits RERRCNT<7:0>: Receive Error Count bits 2009 Microchip Technology Inc. Preliminary DS70593B-page 211 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-9: U-0 -- bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7-6 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 CiCFG1: ECANTM BAUD RATE CONFIGURATION REGISTER 1 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 bit 0 SJW<1:0> BRP<5:0> Unimplemented: Read as `0' SJW<1:0>: Synchronization Jump Width bits 11 = Length is 4 x TQ 10 = Length is 3 x TQ 01 = Length is 2 x TQ 00 = Length is 1 x TQ BRP<5:0>: Baud Rate Prescaler bits 11 1111 = TQ = 2 x 64 x 1/FCAN * * * 00 0010 = TQ = 2 x 3 x 1/FCAN 00 0001 = TQ = 2 x 2 x 1/FCAN 00 0000 = TQ = 2 x 1 x 1/FCAN bit 5-0 DS70593B-page 212 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-10: CiCFG2: ECANTM BAUD RATE CONFIGURATION REGISTER 2 U-0 -- bit 15 R/W-x SEG2PHTS bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x SAM R/W-x R/W-x SEG1PH<2:0> R/W-x R/W-x R/W-x PRSEG<2:0> bit 0 R/W-x WAKFIL U-0 -- U-0 -- U-0 -- R/W-x R/W-x SEG2PH<2:0> bit 8 R/W-x R/W-x Unimplemented: Read as `0' WAKFIL: Select CAN bus Line Filter for Wake-up bit 1 = Use CAN bus line filter for wake-up 0 = CAN bus line filter is not used for wake-up Unimplemented: Read as `0' SEG2PH<2:0>: Phase Buffer Segment 2 bits 111 = Length is 8 x TQ 000 = Length is 1 x TQ SEG2PHTS: Phase Segment 2 Time Select bit 1 = Freely programmable 0 = Maximum of SEG1PH bits or Information Processing Time (IPT), whichever is greater SAM: Sample of the CAN bus Line bit 1 = Bus line is sampled three times at the sample point 0 = Bus line is sampled once at the sample point SEG1PH<2:0>: Phase Buffer Segment 1 bits 111 = Length is 8 x TQ 000 = Length is 1 x TQ PRSEG<2:0>: Propagation Time Segment bits 111 = Length is 8 x TQ 000 = Length is 1 x TQ bit 13-11 bit 10-8 bit 7 bit 6 bit 5-3 bit 2-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 213 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-11: CiFEN1: ECANTM ACCEPTANCE FILTER ENABLE REGISTER R/W-1 FLTEN15 bit 15 R/W-1 FLTEN7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-1 FLTEN6 R/W-1 FLTEN5 R/W-1 FLTEN4 R/W-1 FLTEN3 R/W-1 FLTEN2 R/W-1 FLTEN1 R/W-1 FLTEN14 R/W-1 FLTEN13 R/W-1 FLTEN12 R/W-1 FLTEN11 R/W-1 FLTEN10 R/W-1 FLTEN9 R/W-1 FLTEN8 bit 8 R/W-1 FLTEN0 bit 0 FLTENn: Enable Filter n to Accept Messages bits 1 = Enable Filter n 0 = Disable Filter n REGISTER 19-12: CiBUFPNT1: ECANTM FILTER 0-3 BUFFER POINTER REGISTER R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 bit 7-4 bit 3-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 F3BP<3:0> F2BP<3:0> F1BP<3:0> F0BP<3:0> F3BP<3:0>: RX Buffer Written when Filter 3 Hits bits F2BP<3:0>: RX Buffer Written when Filter 2 Hits bits F1BP<3:0>: RX Buffer Written when Filter 1 Hits bits F0BP<3:0>: RX Buffer Written when Filter 0 Hits bits 1111 = Filter hits received in RX FIFO buffer 1110 = Filter hits received in RX Buffer 14 * * * 0001 = Filter hits received in RX Buffer 1 0000 = Filter hits received in RX Buffer 0 DS70593B-page 214 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-13: CiBUFPNT2: ECANTM FILTER 4-7 BUFFER POINTER REGISTER R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 bit 7-4 bit 3-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 F7BP<3:0> F6BP<3:0> F5BP<3:0> F4BP<3:0> F7BP<3:0>: RX Buffer Written when Filter 7 Hits bits F6BP<3:0>: RX Buffer Written when Filter 6 Hits bits F5BP<3:0>: RX Buffer Written when Filter 5 Hits bits F4BP<3:0>: RX Buffer Written when Filter 4 Hits bits REGISTER 19-14: CiBUFPNT3: ECANTM FILTER 8-11 BUFFER POINTER REGISTER R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 bit 7-4 bit 3-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 F11BP<3:0> F10BP<3:0> F9BP<3:0> F8BP<3:0> F11BP<3:0>: RX Buffer Written when Filter 11 Hits bits F10BP<3:0>: RX Buffer Written when Filter 10 Hits bits F9BP<3:0>: RX Buffer Written when Filter 9 Hits bits F8BP<3:0>: RX Buffer Written when Filter 8 Hits bits 2009 Microchip Technology Inc. Preliminary DS70593B-page 215 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-15: CiBUFPNT4: ECANTM FILTER 12-15 BUFFER POINTER REGISTER R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 bit 7-4 bit 3-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 F15BP<3:0> F14BP<3:0> F13BP<3:0> F12BP<3:0> F15BP<3:0>: RX Buffer Written when Filter 15 Hits bits F14BP<3:0>: RX Buffer Written when Filter 14 Hits bits F13BP<3:0>: RX Buffer Written when Filter 13 Hits bits F12BP<3:0>: RX Buffer Written when Filter 12 Hits bits DS70593B-page 216 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-16: R/W-x SID10 bit 15 R/W-x SID2 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-5 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x SID1 R/W-x SID0 U-0 -- R/W-x EXIDE U-0 -- R/W-x EID17 CiRXFnSID: ECANTM ACCEPTANCE FILTER n STANDARD IDENTIFIER (n = 0, 1, ..., 15) R/W-x SID9 R/W-x SID8 R/W-x SID7 R/W-x SID6 R/W-x SID5 R/W-x SID4 R/W-x SID3 bit 8 R/W-x EID16 bit 0 SID<10:0>: Standard Identifier bits 1 = Message address bit SIDx must be `1' to match filter 0 = Message address bit SIDx must be `0' to match filter Unimplemented: Read as `0' EXIDE: Extended Identifier Enable bit If MIDE = 1 then: 1 = Match only messages with extended identifier addresses 0 = Match only messages with standard identifier addresses If MIDE = 0 then: Ignore EXIDE bit. Unimplemented: Read as `0' EID<17:16>: Extended Identifier bits 1 = Message address bit EIDx must be `1' to match filter 0 = Message address bit EIDx must be `0' to match filter bit 4 bit 3 bit 2 bit 1-0 REGISTER 19-17: R/W-x EID15 bit 15 R/W-x EID7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 CiRXFnEID: ECANTM ACCEPTANCE FILTER n EXTENDED IDENTIFIER (n = 0, 1, ..., 15) R/W-x EID14 R/W-x EID13 R/W-x EID12 R/W-x EID11 R/W-x EID10 R/W-x EID9 R/W-x EID8 bit 8 R/W-x EID6 R/W-x EID5 R/W-x EID4 R/W-x EID3 R/W-x EID2 R/W-x EID1 R/W-x EID0 bit 0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown EID<15:0>: Extended Identifier bits 1 = Message address bit EIDx must be `1' to match filter 0 = Message address bit EIDx must be `0' to match filter 2009 Microchip Technology Inc. Preliminary DS70593B-page 217 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-18: CiFMSKSEL1: ECANTM FILTER 7-0 MASK SELECTION REGISTER R/W-0 bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 bit 13-12 bit 11-10 bit 9-8 bit 7-6 bit 5-4 bit 3-2 bit 1-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 F7MSK<1:0> F6MSK<1:0> F5MSK<1:0> F4MSK<1:0> F3MSK<1:0> F2MSK<1:0> F1MSK<1:0> F0MSK<1:0> F7MSK<1:0>: Mask Source for Filter 7 bit F6MSK<1:0>: Mask Source for Filter 6 bit F5MSK<1:0>: Mask Source for Filter 5 bit F4MSK<1:0>: Mask Source for Filter 4 bit F3MSK<1:0>: Mask Source for Filter 3 bit F2MSK<1:0>: Mask Source for Filter 2 bit F1MSK<1:0>: Mask Source for Filter 1 bit F0MSK<1:0>: Mask Source for Filter 0 bit 11 = Reserved 10 = Acceptance Mask 2 registers contain mask 01 = Acceptance Mask 1 registers contain mask 00 = Acceptance Mask 0 registers contain mask DS70593B-page 218 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-19: CiFMSKSEL2: ECANTM FILTER 15-8 MASK SELECTION REGISTER R/W-0 R/W-0 F15MSK<1:0> bit 15 R/W-0 R/W-0 F11MSK<1:0> bit 7 Legend: R = Readable bit -n = Value at POR bit 15-14 R/W-0 R/W-0 F14MSK<1:0> R/W-0 R/W-0 F13MSK<1:0> R/W-0 R/W-0 F12MSK<1:0> bit 8 R/W-0 R/W-0 F8MSK<1:0> bit 0 R/W-0 R/W-0 F10MSK<1:0> R/W-0 R/W-0 F9MSK<1:0> W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown bit 13-12 bit 11-10 bit 9-8 bit 7-6 bit 5-4 bit 3-2 bit 1-0 F15MSK<1:0>: Mask Source for Filter 15 bit 11 = Reserved 10 = Acceptance Mask 2 registers contain mask 01 = Acceptance Mask 1 registers contain mask 00 = Acceptance Mask 0 registers contain mask F14MSK<1:0>: Mask Source for Filter 14 bit (same values as bit 15-14) F13MSK<1:0>: Mask Source for Filter 13 bit (same values as bit 15-14) F12MSK<1:0>: Mask Source for Filter 12 bit (same values as bit 15-14) F11MSK<1:0>: Mask Source for Filter 11 bit (same values as bit 15-14) F10MSK<1:0>: Mask Source for Filter 10 bit (same values as bit 15-14) F9MSK<1:0>: Mask Source for Filter 9 bit (same values as bit 15-14) F8MSK<1:0>: Mask Source for Filter 8 bit (same values as bit 15-14) 2009 Microchip Technology Inc. Preliminary DS70593B-page 219 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-20: CiRXMnSID: ECANTM ACCEPTANCE FILTER MASK n STANDARD IDENTIFIER R/W-x SID10 bit 15 R/W-x SID2 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-5 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x SID1 R/W-x SID0 U-0 -- R/W-x MIDE U-0 -- R/W-x EID17 R/W-x SID9 R/W-x SID8 R/W-x SID7 R/W-x SID6 R/W-x SID5 R/W-x SID4 R/W-x SID3 bit 8 R/W-x EID16 bit 0 SID<10:0>: Standard Identifier bits 1 = Include bit SIDx in filter comparison 0 = Bit SIDx is don't care in filter comparison Unimplemented: Read as `0' MIDE: Identifier Receive Mode bit 1 = Match only message types (standard or extended address) that correspond to EXIDE bit in filter 0 = Match either standard or extended address message if filters match (i.e., if (Filter SID) = (Message SID) or if (Filter SID/EID) = (Message SID/EID)) Unimplemented: Read as `0' EID<17:16>: Extended Identifier bits 1 = Include bit EIDx in filter comparison 0 = Bit EIDx is don't care in filter comparison bit 4 bit 3 bit 2 bit 1-0 REGISTER 19-21: CiRXMnEID: ECANTM ACCEPTANCE FILTER MASK n EXTENDED IDENTIFIER R/W-x EID15 bit 15 R/W-x EID7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x EID6 R/W-x EID5 R/W-x EID4 R/W-x EID3 R/W-x EID2 R/W-x EID1 R/W-x EID14 R/W-x EID13 R/W-x EID12 R/W-x EID11 R/W-x EID10 R/W-x EID9 R/W-x EID8 bit 8 R/W-x EID0 bit 0 EID<15:0>: Extended Identifier bits 1 = Include bit EIDx in filter comparison 0 = Bit EIDx is don't care in filter comparison DS70593B-page 220 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-22: CiRXFUL1: ECANTM RECEIVE BUFFER FULL REGISTER 1 R/C-0 RXFUL15 bit 15 R/C-0 RXFUL7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 RXFUL6 R/C-0 RXFUL5 R/C-0 RXFUL4 R/C-0 RXFUL3 R/C-0 RXFUL2 R/C-0 RXFUL1 R/C-0 RXFUL14 R/C-0 RXFUL13 R/C-0 RXFUL12 R/C-0 RXFUL11 R/C-0 RXFUL10 R/C-0 RXFUL9 R/C-0 RXFUL8 bit 8 R/C-0 RXFUL0 bit 0 RXFUL<15:0>: Receive Buffer n Full bits 1 = Buffer is full (set by module) 0 = Buffer is empty (clear by application software) REGISTER 19-23: CiRXFUL2: ECANTM RECEIVE BUFFER FULL REGISTER 2 R/C-0 RXFUL31 bit 15 R/C-0 RXFUL23 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 RXFUL22 R/C-0 RXFUL21 R/C-0 RXFUL20 R/C-0 RXFUL19 R/C-0 RXFUL18 R/C-0 RXFUL17 R/C-0 RXFUL30 R/C-0 RXFUL29 R/C-0 RXFUL28 R/C-0 RXFUL27 R/C-0 RXFUL26 R/C-0 RXFUL25 R/C-0 RXFUL24 bit 8 R/C-0 RXFUL16 bit 0 RXFUL<31:16>: Receive Buffer n Full bits 1 = Buffer is full (set by module) 0 = Buffer is empty (clear by application software) 2009 Microchip Technology Inc. Preliminary DS70593B-page 221 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-24: CiRXOVF1: ECANTM RECEIVE BUFFER OVERFLOW REGISTER 1 R/C-0 RXOVF15 bit 15 R/C-0 RXOVF7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 RXOVF6 R/C-0 RXOVF5 R/C-0 RXOVF4 R/C-0 RXOVF3 R/C-0 RXOVF2 R/C-0 RXOVF1 R/C-0 RXOVF14 R/C-0 RXOVF13 R/C-0 RXOVF12 R/C-0 RXOVF11 R/C-0 RXOVF10 R/C-0 RXOVF9 R/C-0 RXOVF8 bit 8 R/C-0 RXOVF0 bit 0 RXOVF<15:0>: Receive Buffer n Overflow bits 1 = Module pointed a write to a full buffer (set by module) 0 = Overflow is cleared (clear by application software) REGISTER 19-25: CiRXOVF2: ECANTM RECEIVE BUFFER OVERFLOW REGISTER 2 R/C-0 RXOVF31 bit 15 R/C-0 RXOVF23 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 C = Clear only bit W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/C-0 RXOVF22 R/C-0 RXOVF21 R/C-0 RXOVF20 R/C-0 RXOVF19 R/C-0 RXOVF18 R/C-0 RXOVF17 R/C-0 RXOVF30 R/C-0 RXOVF29 R/C-0 RXOVF28 R/C-0 RXOVF27 R/C-0 RXOVF26 R/C-0 RXOVF25 R/C-0 RXOVF24 bit 8 R/C-0 RXOVF16 bit 0 RXOVF<31:16>: Receive Buffer n Overflow bits 1 = Module pointed a write to a full buffer (set by module) 0 = Overflow is cleared (clear by application software) DS70593B-page 222 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-26: R/W-0 TXENn bit 15 R/W-0 TXENm bit 7 Legend: R = Readable bit -n = Value at POR bit 15-8 bit 7 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R-0 TXABTm(1) R-0 R-0 R/W-0 TXREQm R/W-0 RTRENm R/W-0 CiTRmnCON: ECANTM TX/RX BUFFER m CONTROL REGISTER (m = 0,2,4,6; n = 1,3,5,7) R-0 TXABTn R-0 TXLARBn R-0 TXERRn R/W-0 TXREQn R/W-0 RTRENn R/W-0 R/W-0 bit 8 R/W-0 bit 0 TXnPRI<1:0> TXLARBm(1) TXERRm(1) TXmPRI<1:0> See Definition for Bits 7-0, Controls Buffer n TXENm: TX/RX Buffer Selection bit 1 = Buffer TRBn is a transmit buffer 0 = Buffer TRBn is a receive buffer TXABTm: Message Aborted bit(1) 1 = Message was aborted 0 = Message completed transmission successfully TXLARBm: Message Lost Arbitration bit(1) 1 = Message lost arbitration while being sent 0 = Message did not lose arbitration while being sent TXERRm: Error Detected During Transmission bit(1) 1 = A bus error occurred while the message was being sent 0 = A bus error did not occur while the message was being sent TXREQm: Message Send Request bit Setting this bit to `1' requests sending a message. The bit will automatically clear when the message is successfully sent. Clearing the bit to `0' while set will request a message abort. RTRENm: Auto-Remote Transmit Enable bit 1 = When a remote transmit is received, TXREQ will be set 0 = When a remote transmit is received, TXREQ will be unaffected TXmPRI<1:0>: Message Transmission Priority bits 11 = Highest message priority 10 = High intermediate message priority 01 = Low intermediate message priority 00 = Lowest message priority bit 6 bit 5 bit 4 bit 3 bit 2 bit 1-0 Note 1: This bit is cleared when TXREQ is set. 2009 Microchip Technology Inc. Preliminary DS70593B-page 223 dsPIC33FJXXXGPX06A/X08A/X10A Note: The buffers, SID, EID, DLC, Data Field and Receive Status registers are located in DMA RAM. REGISTER 19-27: CiTRBnSID: ECANTM BUFFER n STANDARD IDENTIFIER (n = 0, 1, ..., 31) U-0 -- bit 15 R/W-x SID5 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 bit 12-2 bit 1 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x SID4 R/W-x SID3 R/W-x SID2 R/W-x SID1 R/W-x SID0 R/W-x SRR U-0 -- U-0 -- R/W-x SID10 R/W-x SID9 R/W-x SID8 R/W-x SID7 R/W-x SID6 bit 8 R/W-x IDE bit 0 Unimplemented: Read as `0' SID<10:0>: Standard Identifier bits SRR: Substitute Remote Request bit 1 = Message will request remote transmission 0 = Normal message IDE: Extended Identifier bit 1 = Message will transmit extended identifier 0 = Message will transmit standard identifier bit 0 REGISTER 19-28: CiTRBnEID: ECANTM BUFFER n EXTENDED IDENTIFIER (n = 0, 1, ..., 31) U-0 -- bit 15 R/W-x EID13 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-x EID12 R/W-x EID11 R/W-x EID10 R/W-x EID9 R/W-x EID8 R/W-x EID7 U-0 -- U-0 -- U-0 -- R/W-x EID17 R/W-x EID16 R/W-x EID15 R/W-x EID14 bit 8 R/W-x EID6 bit 0 Unimplemented: Read as `0' EID<17:6>: Extended Identifier bits DS70593B-page 224 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-29: CiTRBnDLC: ECANTM BUFFER n DATA LENGTH CONTROL (n = 0, 1, ..., 31) R/W-x EID5 bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-10 bit 9 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R/W-x RB0 R/W-x DLC3 R/W-x DLC2 R/W-x DLC1 R/W-x EID4 R/W-x EID3 R/W-x EID2 R/W-x EID1 R/W-x EID0 R/W-x RTR R/W-x RB1 bit 8 R/W-x DLC0 bit 0 EID<5:0>: Extended Identifier bits RTR: Remote Transmission Request bit 1 = Message will request remote transmission 0 = Normal message RB1: Reserved Bit 1 User must set this bit to `0' per CAN protocol. Unimplemented: Read as `0' RB0: Reserved Bit 0 User must set this bit to `0' per CAN protocol. DLC<3:0>: Data Length Code bits bit 8 bit 7-5 bit 4 bit 3-0 REGISTER 19-30: R/W-x TRBnDm7 bit 7 Legend: R = Readable bit -n = Value at POR bit 7-0 CiTRBnDm: ECANTM BUFFER n DATA FIELD BYTE m (n = 0, 1, ..., 31; m = 0, 1, ..., 7)(1) R/W-x TRBnDm5 R/W-x TRBnDm4 R/W-x TRBnDm3 R/W-x TRBnDm2 R/W-x TRBnDm1 R/W-x TRBnDm0 bit 0 R/W-x TRBnDm6 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown TRBnDm<7:0>: Data Field Buffer `n' Byte `m' bits Note 1: The Most Significant Byte contains byte (m + 1) of the buffer. 2009 Microchip Technology Inc. Preliminary DS70593B-page 225 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 19-31: CiTRBnSTAT: ECANTM RECEIVE BUFFER n STATUS (n = 0, 1, ..., 31) U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 bit 12-8 bit 7-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 0 U-0 -- U-0 -- R/W-x FILHIT4 R/W-x FILHIT3 R/W-x FILHIT2 R/W-x FILHIT1 R/W-x FILHIT0 bit 8 Unimplemented: Read as `0' FILHIT<4:0>: Filter Hit Code bits (only written by module for receive buffers, unused for transmit buffers) Encodes number of filter that resulted in writing this buffer. Unimplemented: Read as `0' DS70593B-page 226 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 20.0 DATA CONVERTER INTERFACE (DCI) MODULE transmitted. The CSDO pin is tri-stated, or driven to `0', during CSCK periods when data is not transmitted depending on the state of the CSDOM control bit. This allows other devices to place data on the serial bus during transmission periods not used by the DCI module. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 20. "Data Converter Interface (DCI)" (DS70288) in the "dsPIC33F/PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. 20.2.3 CSDI PIN The Serial Data Input (CSDI) pin is configured as an input only pin when the module is enabled. 20.2.3.1 COFS Pin The Codec Frame Synchronization (COFS) pin is used to synchronize data transfers that occur on the CSDO and CSDI pins. The COFS pin may be configured as an input or an output. The data direction for the COFS pin is determined by the COFSD control bit in the DCICON1 register. The DCI module accesses the shadow registers while the CPU is in the process of accessing the memory mapped buffer registers. 20.1 Module Introduction The dsPIC33FJXXXGPX06A/X08A/X10A Data Converter Interface (DCI) module allows simple interfacing of devices, such as audio coder/decoders (Codecs), ADC and D/A converters. The following interfaces are supported: * Framed Synchronous Serial Transfer (Single or Multi-Channel) * Inter-IC Sound (I2S) Interface * AC-Link Compliant mode The DCI module provides the following general features: * Programmable word size up to 16 bits * Supports up to 16 time slots, for a maximum frame size of 256 bits * Data buffering for up to 4 samples without CPU overhead 20.2.4 BUFFER DATA ALIGNMENT Data values are always stored left justified in the buffers since most Codec data is represented as a signed 2's complement fractional number. If the received word length is less than 16 bits, the unused Least Significant bits in the Receive Buffer registers are set to `0' by the module. If the transmitted word length is less than 16 bits, the unused LSbs in the Transmit Buffer register are ignored by the module. The word length setup is described in subsequent sections of this document. 20.2.5 TRANSMIT/RECEIVE SHIFT REGISTER The DCI module has a 16-bit shift register for shifting serial data in and out of the module. Data is shifted in/ out of the shift register, MSb first, since audio PCM data is transmitted in signed 2's complement format. 20.2 Module I/O Pins 20.2.6 DCI BUFFER CONTROL There are four I/O pins associated with the module. When enabled, the module controls the data direction of each of the four pins. 20.2.1 CSCK PIN The CSCK pin provides the serial clock for the DCI module. The CSCK pin may be configured as an input or output using the CSCKD control bit in the DCICON1 SFR. When configured as an output, the serial clock is provided by the dsPIC33FJXXXGPX06A/X08A/X10A. When configured as an input, the serial clock must be provided by an external device. The DCI module contains a buffer control unit for transferring data between the shadow buffer memory and the Serial Shift register. The buffer control unit is a simple 2-bit address counter that points to word locations in the shadow buffer memory. For the receive memory space (high address portion of DCI buffer memory), the address counter is concatenated with a `0' in the MSb location to form a 3-bit address. For the transmit memory space (high portion of DCI buffer memory), the address counter is concatenated with a `1' in the MSb location. Note: The DCI buffer control unit always accesses the same relative location in the transmit and receive buffers, so only one address counter is provided. 20.2.2 CSDO PIN The Serial Data Output (CSDO) pin is configured as an output only pin when the module is enabled. The CSDO pin drives the serial bus whenever data is to be 2009 Microchip Technology Inc. Preliminary DS70593B-page 227 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 20-1: DCI MODULE BLOCK DIAGRAM BCG Control bits SCKD FOSC/4 Sample Rate Generator CSCK FSD Word Size Selection bits Frame Length Selection bits DCI Mode Selection bits 16-bit Data Bus Frame Synchronization Generator COFS Receive Buffer Registers w/Shadow DCI Buffer Control Unit 15 Transmit Buffer Registers w/Shadow DCI Shift Register 0 CSDI CSDO DS70593B-page 228 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 20-1: R/W-0 DCIEN bit 15 R/W-0 UNFM bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 CSDOM R/W-0 DJST U-0 -- U-0 -- U-0 -- R/W-0 DCICON1: DCI CONTROL REGISTER 1 U-0 -- R/W-0 DCISIDL U-0 -- R/W-0 DLOOP R/W-0 CSCKD R/W-0 CSCKE R/W-0 COFSD bit 8 R/W-0 bit 0 COFSM<1:0> DCIEN: DCI Module Enable bit 1 = Module is enabled 0 = Module is disabled Unimplemented: Read as `0' DCISIDL: DCI Stop in Idle Control bit 1 = Module will halt in CPU Idle mode 0 = Module will continue to operate in CPU Idle mode Unimplemented: Read as `0' DLOOP: Digital Loopback Mode Control bit 1 = Digital Loopback mode is enabled. CSDI and CSDO pins internally connected 0 = Digital Loopback mode is disabled CSCKD: Sample Clock Direction Control bit 1 = CSCK pin is an input when DCI module is enabled 0 = CSCK pin is an output when DCI module is enabled CSCKE: Sample Clock Edge Control bit 1 = Data changes on serial clock falling edge, sampled on serial clock rising edge 0 = Data changes on serial clock rising edge, sampled on serial clock falling edge COFSD: Frame Synchronization Direction Control bit 1 = COFS pin is an input when DCI module is enabled 0 = COFS pin is an output when DCI module is enabled UNFM: Underflow Mode bit 1 = Transmit last value written to the transmit registers on a transmit underflow 0 = Transmit `0's on a transmit underflow CSDOM: Serial Data Output Mode bit 1 = CSDO pin will be tri-stated during disabled transmit time slots 0 = CSDO pin drives `0's during disabled transmit time slots DJST: DCI Data Justification Control bit 1 = Data transmission/reception is begun during the same serial clock cycle as the frame synchronization pulse 0 = Data transmission/reception is begun one serial clock cycle after frame synchronization pulse Unimplemented: Read as `0' COFSM<1:0>: Frame Sync Mode bits 11 = 20-bit AC-Link mode 10 = 16-bit AC-Link mode 01 = I2S Frame Sync mode 00 = Multi-Channel Frame Sync mode bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4-2 bit 1-0 2009 Microchip Technology Inc. Preliminary DS70593B-page 229 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 20-2: U-0 -- bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-10 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 COFSG<2:0> R/W-0 U-0 -- R/W-0 R/W-0 R/W-0 DCICON2: DCI CONTROL REGISTER 2 U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 U-0 -- R/W-0 COFSG3 bit 8 R/W-0 bit 0 BLEN<1:0> WS<3:0> Unimplemented: Read as `0' BLEN<1:0>: Buffer Length Control bits 11 = Four data words will be buffered between interrupts 10 = Three data words will be buffered between interrupts 01 = Two data words will be buffered between interrupts 00 = One data word will be buffered between interrupts Unimplemented: Read as `0' COFSG<3:0>: Frame Sync Generator Control bits 1111 = Data frame has 16 words * * * 0010 = Data frame has 3 words 0001 = Data frame has 2 words 0000 = Data frame has 1 word Unimplemented: Read as `0' WS<3:0>: DCI Data Word Size bits 1111 = Data word size is 16 bits * * * 0100 = Data word size is 5 bits 0011 = Data word size is 4 bits 0010 = Invalid Selection. Do not use. Unexpected results may occur 0001 = Invalid Selection. Do not use. Unexpected results may occur 0000 = Invalid Selection. Do not use. Unexpected results may occur bit 9 bit 8-5 bit 4 bit 3-0 DS70593B-page 230 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 20-3: U-0 -- bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 DCICON3: DCI CONTROL REGISTER 3 U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 R/W-0 bit 8 R/W-0 bit 0 BCG<11:8> BCG<7:0> Unimplemented: Read as `0' BCG<11:0>: DCI Bit Clock Generator Control bits 2009 Microchip Technology Inc. Preliminary DS70593B-page 231 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 20-4: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-12 bit 11-8 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- R-0 ROV R-0 RFUL R-0 TUNF R-0 TMPTY bit 0 DCISTAT: DCI STATUS REGISTER U-0 -- U-0 -- U-0 -- R-0 R-0 R-0 R-0 bit 8 SLOT<3:0> Unimplemented: Read as `0' SLOT<3:0>: DCI Slot Status bits 1111 = Slot #15 is currently active * * * 0010 = Slot #2 is currently active 0001 = Slot #1 is currently active 0000 = Slot #0 is currently active Unimplemented: Read as `0' ROV: Receive Overflow Status bit 1 = A receive overflow has occurred for at least one receive register 0 = A receive overflow has not occurred RFUL: Receive Buffer Full Status bit 1 = New data is available in the receive registers 0 = The receive registers have old data TUNF: Transmit Buffer Underflow Status bit 1 = A transmit underflow has occurred for at least one transmit register 0 = A transmit underflow has not occurred TMPTY: Transmit Buffer Empty Status bit 1 = The transmit registers are empty 0 = The transmit registers are not empty bit 7-4 bit 3 bit 2 bit 1 bit 0 DS70593B-page 232 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 20-5: R/W-0 RSE15 bit 15 R/W-0 RSE7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 RSE6 R/W-0 RSE5 R/W-0 RSE4 R/W-0 RSE3 R/W-0 RSE2 R/W-0 RSE1 RSCON: DCI RECEIVE SLOT CONTROL REGISTER R/W-0 RSE14 R/W-0 RSE13 R/W-0 RSE12 R/W-0 RSE11 R/W-0 RSE10 R/W-0 RSE9 R/W-0 RSE8 bit 8 R/W-0 RSE0 bit 0 RSE<15:0>: Receive Slot Enable bits 1 = CSDI data is received during the individual time slot n 0 = CSDI data is ignored during the individual time slot n REGISTER 20-6: R/W-0 TSE15 bit 15 R/W-0 TSE7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 TSCON: DCI TRANSMIT SLOT CONTROL REGISTER R/W-0 TSE14 R/W-0 TSE13 R/W-0 TSE12 R/W-0 TSE11 R/W-0 TSE10 R/W-0 TSE9 R/W-0 TSE8 bit 8 R/W-0 TSE6 R/W-0 TSE5 R/W-0 TSE4 R/W-0 TSE3 R/W-0 TSE2 R/W-0 TSE1 R/W-0 TSE0 bit 0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown TSE<15:0>: Transmit Slot Enable Control bits 1 = Transmit buffer contents are sent during the individual time slot n 0 = CSDO pin is tri-stated or driven to logic `0', during the individual time slot, depending on the state of the CSDOM bit 2009 Microchip Technology Inc. Preliminary DS70593B-page 233 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 234 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 21.0 10-BIT/12-BIT ANALOG-TO-DIGITAL CONVERTER (ADC) Depending on the particular device pinout, the ADC can have up to 32 analog input pins, designated AN0 through AN31. In addition, there are two analog input pins for external voltage reference connections. These voltage reference inputs may be shared with other analog input pins. The actual number of analog input pins and external voltage reference input configuration will depend on the specific device. Refer to the device data sheet for further details. A block diagram of the ADC is shown in Figure 21-1. Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 16. "Analog-to-Digital Converter (ADC)" (DS70183) in the "dsPIC33F/ PIC24H Family Reference Manual", which is available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. The dsPIC33FJXXXGPX06A/X08A/X10A devices have up to 32 ADC input channels. These devices also have up to 2 ADC modules (ADCx, where `x' = 1 or 2), each with its own set of Special Function Registers. The AD12B bit (ADxCON1<10>) allows each of the ADC modules to be configured by the user as either a 10-bit, 4-sample/hold ADC (default configuration) or a 12-bit, 1-sample/hold ADC. Note: The ADC module needs to be disabled before modifying the AD12B bit. 21.2 1. ADC Initialization The following configuration steps should be performed. Configure the ADC module: a) Select port pins as analog inputs (ADxPCFGH<15:0> or ADxPCFGL<15:0>). b) Select voltage reference source to match expected range on analog inputs (ADxCON2<15:13>). c) Select the analog conversion clock to match desired data rate with processor clock (ADxCON3<7:0>). d) Determine how many S/H channels will be used (ADxCON2<9:8> and ADxPCFGH<15:0> or ADxPCFGL<15:0>). e) Select the appropriate sample/conversion sequence (ADxCON1<7:5> and ADxCON3<12:8>). f) Select how conversion results are presented in the buffer (ADxCON1<9:8>). g) Turn on ADC module (ADxCON1<15>). Configure ADC interrupt (if required): a) Clear the ADxIF bit. b) Select ADC interrupt priority. 2. 21.1 Key Features The 10-bit ADC configuration has the following key features: * * * * * * * * * * Successive Approximation (SAR) conversion Conversion speeds of up to 1.1 Msps Up to 32 analog input pins External voltage reference input pins Simultaneous sampling of up to four analog input pins Automatic Channel Scan mode Selectable conversion trigger source Selectable Buffer Fill modes Four result alignment options (signed/unsigned, fractional/integer) Operation during CPU Sleep and Idle modes 21.3 ADC and DMA If more than one conversion result needs to be buffered before triggering an interrupt, DMA data transfers can be used. Both ADC1 and ADC2 can trigger a DMA data transfer. If ADC1 or ADC2 is selected as the DMA IRQ source, a DMA transfer occurs when the AD1IF or AD2IF bit gets set as a result of an ADC1 or ADC2 sample conversion sequence. The SMPI<3:0> bits (ADxCON2<5:2>) are used to select how often the DMA RAM buffer pointer is incremented. The ADDMABM bit (ADxCON1<12>) determines how the conversion results are filled in the DMA RAM buffer area being used for ADC. If this bit is set, DMA buffers are written in the order of conversion. The module will provide an address to the DMA channel that is the same as the address used for the non-DMA stand-alone buffer. If the ADDMABM bit is cleared, then DMA buffers are written in Scatter/Gather mode. The module will provide a scatter/gather address to the DMA channel, based on the index of the analog input and the size of the DMA buffer. The 12-bit ADC configuration supports all the above features, except: * In the 12-bit configuration, conversion speeds of up to 500 ksps are supported * There is only 1 sample/hold amplifier in the 12-bit configuration, so simultaneous sampling of multiple channels is not supported. 2009 Microchip Technology Inc. Preliminary DS70593B-page 235 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 21-1: AN0 ANy(3) CHANNEL SCAN CH0SA<4:0> CH0 AN1 VREFL CSCNA CH0SB<4:0> S/H0 + - ADCx MODULE BLOCK DIAGRAM CH0NA CH0NB AN0 AN3 + CH123SA CH123SB CH1(2) AN6 AN9 VREFL VCFG<2:0> S/H1 (1) VREFL+(1)AVDD VREFL- AVSS VREFH CH123NA CH123NB VREFL ADC1BUF0 SAR ADC AN1 AN4 + CH123SA CH123SB CH2(2) AN7 AN10 VREFL S/H2 CH123NA CH123NB AN2 AN5 S/H3 + CH123SA CH123SB CH3(2) AN8 AN11 VREFL - CH123NA CH123NB Alternate Input Selection Note 1: 2: 3: VREF+, VREF- inputs can be multiplexed with other analog inputs. Channels 1, 2 and 3 are not applicable for the 12-bit mode of operation. For 64-pin devices, y = 17; for 80-pin devices, y = 23; for 100-pin devices, y = 31; for ADC2, y = 15. DS70593B-page 236 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 21-2: ADC CONVERSION CLOCK PERIOD BLOCK DIAGRAM ADxCON3<15> ADC Internal RC Clock(2) ADxCON3<5:0> 6 ADC Conversion Clock Multiplier 1, 2, 3, 4, 5,..., 64 Note 1: 2: 0 TAD 1 TOSC (1) TCY X2 Refer to Figure 9-2 for the derivation of FOSC when the PLL is enabled. If the PLL is not used, FOSC is equal to the clock source frequency. TOSC = 1/FOSC. See the ADC electrical specifications for the exact RC clock value. 2009 Microchip Technology Inc. Preliminary DS70593B-page 237 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-1: R/W-0 ADON bit 15 R/W-0 R/W-0 SSRC<2:0> bit 7 Legend: R = Readable bit -n = Value at POR bit 15 HC = Cleared by hardware W = Writable bit `1' = Bit is set HS = Set by hardware `0' = Bit is cleared C = Clear only bit x = Bit is unknown R/W-0 U-0 -- R/W-0 SIMSAM R/W-0 ASAM R/W-0 HC,HS SAMP ADxCON1: ADCx CONTROL REGISTER 1(where x = 1 or 2) U-0 -- R/W-0 ADSIDL R/W-0 ADDMABM U-0 -- R/W-0 AD12B R/W-0 R/W-0 bit 8 R/C-0 HC, HS DONE bit 0 FORM<1:0> U = Unimplemented bit, read as `0' ADON: ADC Operating Mode bit 1 = ADC module is operating 0 = ADC is off Unimplemented: Read as `0' ADSIDL: Stop in Idle Mode bit 1 = Discontinue module operation when device enters Idle mode 0 = Continue module operation in Idle mode ADDMABM: DMA Buffer Build Mode bit 1 = DMA buffers are written in the order of conversion. The module will provide an address to the DMA channel that is the same as the address used for the non-DMA stand-alone buffer 0 = DMA buffers are written in Scatter/Gather mode. The module will provide a scatter/gather address to the DMA channel, based on the index of the analog input and the size of the DMA buffer Unimplemented: Read as `0' AD12B: 10-Bit or 12-Bit Operation Mode bit 1 = 12-bit, 1-channel ADC operation 0 = 10-bit, 4-channel ADC operation FORM<1:0>: Data Output Format bits For 10-bit operation: 11 = Signed fractional (DOUT = sddd dddd dd00 0000, where s = .NOT.d<9>) 10 = Fractional (DOUT = dddd dddd dd00 0000) 01 = Signed integer (DOUT = ssss sssd dddd dddd, where s = .NOT.d<9>) 00 = Integer (DOUT = 0000 00dd dddd dddd) For 12-bit operation: 11 = Signed fractional (DOUT = sddd dddd dddd 0000, where s = .NOT.d<11>) 10 = Fractional (DOUT = dddd dddd dddd 0000) 01 = Signed Integer (DOUT = ssss sddd dddd dddd, where s = .NOT.d<11>) 00 = Integer (DOUT = 0000 dddd dddd dddd) SSRC<2:0>: Sample Clock Source Select bits 111 = Internal counter ends sampling and starts conversion (auto-convert) 110 = Reserved 101 = Reserved 100 = GP timer (Timer5 for ADC1, Timer3 for ADC2) compare ends sampling and starts conversion 011 = Reserved 010 = GP timer (Timer3 for ADC1, Timer5 for ADC2) compare ends sampling and starts conversion 001 = Active transition on INT0 pin ends sampling and starts conversion 000 = Clearing sample bit ends sampling and starts conversion Unimplemented: Read as `0' bit 14 bit 13 bit 12 bit 11 bit 10 bit 9-8 bit 7-5 bit 4 DS70593B-page 238 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-1: bit 3 ADxCON1: ADCx CONTROL REGISTER 1(where x = 1 or 2) (CONTINUED) SIMSAM: Simultaneous Sample Select bit (only applicable when CHPS<1:0> = 01 or 1x) When AD12B = 1, SIMSAM is: U-0, Unimplemented, Read as `0' 1 = Samples CH0, CH1, CH2, CH3 simultaneously (when CHPS<1:0> = 1x); or Samples CH0 and CH1 simultaneously (when CHPS<1:0> = 01) 0 = Samples multiple channels individually in sequence ASAM: ADC Sample Auto-Start bit 1 = Sampling begins immediately after last conversion. SAMP bit is auto-set 0 = Sampling begins when SAMP bit is set SAMP: ADC Sample Enable bit 1 = ADC sample/hold amplifiers are sampling 0 = ADC sample/hold amplifiers are holding If ASAM = 0, software may write `1' to begin sampling. Automatically set by hardware if ASAM = 1. If SSRC = 000, software may write `0' to end sampling and start conversion. If SSRC 000, automatically cleared by hardware to end sampling and start conversion. DONE: ADC Conversion Status bit 1 = ADC conversion cycle is completed 0 = ADC conversion not started or in progress Automatically set by hardware when ADC conversion is complete. Software may write `0' to clear DONE status (software not allowed to write `1'). Clearing this bit will NOT affect any operation in progress. Automatically cleared by hardware at start of a new conversion. bit 2 bit 1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 239 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-2: R/W-0 bit 15 R-0 BUFS bit 7 Legend: R = Readable bit -n = Value at POR bit 15-13 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 BUFM ADxCON2: ADCx CONTROL REGISTER 2 (where x = 1 or 2) R/W-0 R/W-0 U-0 -- U-0 -- R/W-0 CSCNA R/W-0 R/W-0 bit 8 R/W-0 ALTS bit 0 CHPS<1:0> VCFG<2:0> SMPI<3:0> VCFG<2:0>: Converter Voltage Reference Configuration bits VREF+ 000 001 010 011 1xx AVDD External VREF+ AVDD External VREF+ AVDD VREFAVSS AVSS External VREFExternal VREFAvss bit 12-11 bit 10 Unimplemented: Read as `0' CSCNA: Scan Input Selections for CH0+ during Sample A bit 1 = Scan inputs 0 = Do not scan inputs CHPS<1:0>: Selects Channels Utilized bits When AD12B = 1, CHPS<1:0> is: U-0, Unimplemented, Read as `0' 1x = Converts CH0, CH1, CH2 and CH3 01 = Converts CH0 and CH1 00 = Converts CH0 BUFS: Buffer Fill Status bit (only valid when BUFM = 1) 1 = ADC is currently filling second half of buffer, user should access data in first half 0 = ADC is currently filling first half of buffer, user should access data in second half Unimplemented: Read as `0' SMPI<3:0>: Selects Increment Rate for DMA Addresses bits or number of sample/conversion operations per interrupt 1111 = Increments the DMA address or generates interrupt after completion of every 16th sample/ conversion operation 1110 = Increments the DMA address or generates interrupt after completion of every 15th sample/ conversion operation * * * 0001 = Increments the DMA address or generates interrupt after completion of every 2nd sample/ conversion operation 0000 = Increments the DMA address or generates interrupt after completion of every sample/conversion operation BUFM: Buffer Fill Mode Select bit 1 = Starts filling first half of buffer on first interrupt and second half of the buffer on next interrupt 0 = Always starts filling buffer from the beginning ALTS: Alternate Input Sample Mode Select bit 1 = Uses channel input selects for Sample A on first sample and Sample B on next sample 0 = Always uses channel input selects for Sample A bit 9-8 bit 7 bit 6 bit 5-2 bit 1 bit 0 DS70593B-page 240 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-3: R/W-0 ADRC bit 15 R/W-0 bit 7 Legend: R = Readable bit -n = Value at POR bit 15 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 ADxCON3: ADCx CONTROL REGISTER 3 U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 SAMC<4:0>(1) bit 8 R/W-0 bit 0 R/W-0 R/W-0 ADCS<7:0>(2) ADRC: ADC Conversion Clock Source bit 1 = ADC internal RC clock 0 = Clock derived from system clock Unimplemented: Read as `0' SAMC<4:0>: Auto Sample Time bits(1) 11111 = 31 TAD * * * 00001 = 1 TAD 00000 = 0 TAD ADCS<7:0>: ADC Conversion Clock Select bits(2) 11111111 = Reserved * * * 01000000 = Reserved 00111111 = TCY * (ADCS<7:0> + 1) = 64 * TCY = TAD * * * 00000010 = TCY * (ADCS<7:0> + 1) = 3 * TCY = TAD 00000001 = TCY * (ADCS<7:0> + 1) = 2 * TCY = TAD 00000000 = TCY * (ADCS<7:0> + 1) = 1 * TCY = TAD bit 14-13 bit 12-8 bit 7-0 Note 1: This bit only used if ADxCON1<7:5> (SSRC<2:0>) = 111. 2: This bit is not used if ADxCON3<15> (ADRC) = 1. 2009 Microchip Technology Inc. Preliminary DS70593B-page 241 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-4: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-3 bit 2-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 DMABL<2:0> bit 0 ADxCON4: ADCx CONTROL REGISTER 4 U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- U-0 -- bit 8 R/W-0 Unimplemented: Read as `0' DMABL<2:0>: Selects Number of DMA Buffer Locations per Analog Input bits 111 = Allocates 128 words of buffer to each analog input 110 = Allocates 64 words of buffer to each analog input 101 = Allocates 32 words of buffer to each analog input 100 = Allocates 16 words of buffer to each analog input 011 = Allocates 8 words of buffer to each analog input 010 = Allocates 4 words of buffer to each analog input 001 = Allocates 2 words of buffer to each analog input 000 = Allocates 1 word of buffer to each analog input DS70593B-page 242 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-5: U-0 -- bit 15 U-0 -- bit 7 Legend: R = Readable bit -n = Value at POR bit 15-11 bit 10-9 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 ADxCHS123: ADCx INPUT CHANNEL 1, 2, 3 SELECT REGISTER U-0 -- U-0 -- U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 CH123SB bit 8 R/W-0 CH123SA bit 0 CH123NB<1:0> CH123NA<1:0> Unimplemented: Read as `0' CH123NB<1:0>: Channel 1, 2, 3 Negative Input Select for Sample B bits When AD12B = 1, CHxNB is: U-0, Unimplemented, Read as `0' 11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11 10 = CH1 negative input is AN6, CH2 negative input is AN7, CH3 negative input is AN8 0x = CH1, CH2, CH3 negative input is VREFCH123SB: Channel 1, 2, 3 Positive Input Select for Sample B bit When AD12B = 1, CHxSB is: U-0, Unimplemented, Read as `0' 1 = CH1 positive input is AN3, CH2 positive input is AN4, CH3 positive input is AN5 0 = CH1 positive input is AN0, CH2 positive input is AN1, CH3 positive input is AN2 Unimplemented: Read as `0' CH123NA<1:0>: Channel 1, 2, 3 Negative Input Select for Sample A bits When AD12B = 1, CHxNA is: U-0, Unimplemented, Read as `0' 11 = CH1 negative input is AN9, CH2 negative input is AN10, CH3 negative input is AN11 10 = CH1 negative input is AN6, CH2 negative input is AN7, CH3 negative input is AN8 0x = CH1, CH2, CH3 negative input is VREFCH123SA: Channel 1, 2, 3 Positive Input Select for Sample A bit When AD12B = 1, CHxSA is: U-0, Unimplemented, Read as `0' 1 = CH1 positive input is AN3, CH2 positive input is AN4, CH3 positive input is AN5 0 = CH1 positive input is AN0, CH2 positive input is AN1, CH3 positive input is AN2 bit 8 bit 7-3 bit 2-1 bit 0 2009 Microchip Technology Inc. Preliminary DS70593B-page 243 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-6: R/W-0 CH0NB bit 15 R/W-0 CH0NA bit 7 Legend: R = Readable bit -n = Value at POR bit 15 bit 14-13 bit 12-8 bit 7 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 CH0SA<4:0> bit 0 R/W-0 ADxCHS0: ADCx INPUT CHANNEL 0 SELECT REGISTER U-0 -- U-0 -- R/W-0 R/W-0 R/W-0 CH0SB<4:0> bit 8 R/W-0 R/W-0 R/W-0 CH0NB: Channel 0 Negative Input Select for Sample B bit Same definition as bit 7. Unimplemented: Read as `0' CH0SB<4:0>: Channel 0 Positive Input Select for Sample B bits Same definition as bit<4:0>. CH0NA: Channel 0 Negative Input Select for Sample A bit 1 = Channel 0 negative input is AN1 0 = Channel 0 negative input is VREFUnimplemented: Read as `0' CH0SA<4:0>: Channel 0 Positive Input Select for Sample A bits 11111 = Channel 0 positive input is AN31 11110 = Channel 0 positive input is AN30 * * * 00010 = Channel 0 positive input is AN2 00001 = Channel 0 positive input is AN1 00000 = Channel 0 positive input is AN0 ADC2 can only select AN0 through AN15 as positive input. bit 6-5 bit 4-0 Note: DS70593B-page 244 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-7: R/W-0 CSS31 bit 15 R/W-0 CSS23 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 CSS22 R/W-0 CSS21 R/W-0 CSS20 R/W-0 CSS19 R/W-0 CSS18 R/W-0 CSS17 ADxCSSH: ADCx INPUT SCAN SELECT REGISTER HIGH(1,2) R/W-0 CSS30 R/W-0 CSS29 R/W-0 CSS28 R/W-0 CSS27 R/W-0 CSS26 R/W-0 CSS25 R/W-0 CSS24 bit 8 R/W-0 CSS16 bit 0 CSS<31:16>: ADC Input Scan Selection bits 1 = Select ANx for input scan 0 = Skip ANx for input scan Note 1: On devices without 32 analog inputs, all ADxCSSH bits may be selected by user. However, inputs selected for scan without a corresponding input on device will convert VREFL. 2: CSSx = ANx, where x = 16 through 31. REGISTER 21-8: R/W-0 CSS15 bit 15 R/W-0 CSS7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 ADxCSSL: ADCx INPUT SCAN SELECT REGISTER LOW(1,2) R/W-0 CSS14 R/W-0 CSS13 R/W-0 CSS12 R/W-0 CSS11 R/W-0 CSS10 R/W-0 CSS9 R/W-0 CSS8 bit 8 R/W-0 CSS6 R/W-0 CSS5 R/W-0 CSS4 R/W-0 CSS3 R/W-0 CSS2 R/W-0 CSS1 R/W-0 CSS0 bit 0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown CSS<15:0>: ADC Input Scan Selection bits 1 = Select ANx for input scan 0 = Skip ANx for input scan Note 1: On devices without 16 analog inputs, all ADxCSSL bits may be selected by user. However, inputs selected for scan without a corresponding input on device will convert VREF-. 2: CSSx = ANx, where x = 0 through 15. 2009 Microchip Technology Inc. Preliminary DS70593B-page 245 dsPIC33FJXXXGPX06A/X08A/X10A REGISTER 21-9: R/W-0 PCFG31 bit 15 R/W-0 PCFG23 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 PCFG22 R/W-0 PCFG21 R/W-0 PCFG20 R/W-0 PCFG19 R/W-0 PCFG18 R/W-0 PCFG17 AD1PCFGH: ADC1 PORT CONFIGURATION REGISTER HIGH(1,2,3,4) R/W-0 R/W-0 PCFG29 R/W-0 PCFG28 R/W-0 PCFG27 R/W-0 PCFG26 R/W-0 PCFG25 R/W-0 PCFG24 bit 8 R/W-0 PCFG16 bit 0 PCFG30 PCFG<31:16>: ADC Port Configuration Control bits 1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AVSS 0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage Note 1: On devices without 32 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on ports without a corresponding input on device. 2: ADC2 only supports analog inputs AN0-AN15; therefore, no ADC2 port Configuration register exists. 3: PCFGx = ANx, where x = 16 through 31. 4: PCFGx bits have no effect if ADC module is disabled by setting ADxMD bit in the PMDx register. In this case all port pins multiplexed with ANx will be in Digital mode. REGISTER 21-10: ADxPCFGL: ADCx PORT CONFIGURATION REGISTER LOW(1,2,3,4) R/W-0 PCFG15 bit 15 R/W-0 PCFG7 bit 7 Legend: R = Readable bit -n = Value at POR bit 15-0 W = Writable bit `1' = Bit is set U = Unimplemented bit, read as `0' `0' = Bit is cleared x = Bit is unknown R/W-0 PCFG6 R/W-0 PCFG5 R/W-0 PCFG4 R/W-0 PCFG3 R/W-0 PCFG2 R/W-0 PCFG1 R/W-0 PCFG14 R/W-0 PCFG13 R/W-0 PCFG12 R/W-0 PCFG11 R/W-0 PCFG10 R/W-0 PCFG9 R/W-0 PCFG8 bit 8 R/W-0 PCFG0 bit 0 PCFG<15:0>: ADC Port Configuration Control bits 1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AVSS 0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage Note 1: On devices without 16 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on ports without a corresponding input on device. 2: On devices with two analog-to-digital modules, both AD1PCFGL and AD2PCFGL will affect the configuration of port pins multiplexed with AN0-AN15. 3: PCFGx = ANx, where x = 0 through 15. 4: PCFGx bits have no effect if ADC module is disabled by setting ADxMD bit in the PMDx register. In this case all port pins multiplexed with ANx will be in Digital mode DS70593B-page 246 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 22.0 SPECIAL FEATURES 22.1 Configuration Bits Note 1: This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to Section 23. "CodeGuardTM Security" (DS70199), Section 24. "Programming and Diagnostics" (DS70207), and Section 25. "Device Configuration" (DS70194) in the "dsPIC33F/PIC24H Family Reference Manual", which are available from the Microchip web site (www.microchip.com). 2: Some registers and associated bits described in this section may not be available on all devices. Refer to Section 4.0 "Memory Organization" in this data sheet for device-specific register and bit information. dsPIC33FJXXXGPX06A/X08A/X10A devices include the following features intended to maximize application flexibility and reliability, and minimize cost through elimination of external components: * * * * * * Flexible Configuration Watchdog Timer (WDT) Code Protection and CodeGuardTM Security JTAG Boundary Scan Interface In-Circuit Serial ProgrammingTM (ICSPTM) In-Circuit Emulation The Configuration bits can be programmed (read as `0'), or left unprogrammed (read as `1'), to select various device configurations. These bits are mapped starting at program memory location 0xF80000. The device Configuration register map is shown in Table 22-1. The individual Configuration bit descriptions for the Configuration registers are shown in Table 22-2. Note that address 0xF80000 is beyond the user program memory space. In fact, it belongs to the configuration memory space (0x800000-0xFFFFFF) which can only be accessed using table reads and table writes. To prevent inadvertent configuration changes during code execution, all programmable Configuration bits are write-once. After a bit is initially programmed during a power cycle, it cannot be written to again. Changing a device configuration requires that power to the device be cycled. TABLE 22-1: Address 0xF80000 FBS 0xF80002 FSS DEVICE CONFIGURATION REGISTER MAP Bit 7 Bit 6 Bit 5 -- -- -- -- -- PLLKEN(3) JTAGEN Bit 4 -- -- -- -- -- WDTPRE -- -- -- -- -- -- -- Bit 3 Bit 2 BSS<2:0> SSS<2:0> Bit 1 Bit 0 BWRP SWRP RBS<1:0> RSS<1:0> -- IESO -- Reserved(2) Name 0xF80004 FGS 0xF80006 FOSCSEL 0xF80008 FOSC 0xF8000A FWDT 0xF8000C FPOR 0xF8000E FICD 0xF80010 FUID0 0xF80012 FUID1 0xF80014 FUID2 0xF80016 FUID3 GSS1 GSS0 GWRP FNOSC<2:0> OSCIOFNC POSCMD<1:0> WDTPOST<3:0> -- FPWRT<2:0> ICS<1:0> FCKSM<1:0> FWDTEN WINDIS Reserved(4) Reserved(1) User Unit ID Byte 0 User Unit ID Byte 1 User Unit ID Byte 2 User Unit ID Byte 3 Legend: -- = unimplemented bit, read as `0'. Note 1: These bits are reserved for use by development tools and must be programmed as `1'. 2: When read, this bit returns the current programmed value. 3: This bit is unimplemented on dsPIC33FJ64GPX06A/X08A/X10A and dsPIC33FJ128GPX06A/X08A/X10A devices and reads as `0'. 4: These bits are reserved and always read as `1'. 2009 Microchip Technology Inc. Preliminary DS70593B-page 247 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 22-2: Bit Field BWRP dsPIC33FJXXXGPX06A/X08A/X10A CONFIGURATION BITS DESCRIPTION Register FBS Description Boot Segment Program Flash Write Protection 1 = Boot segment may be written 0 = Boot segment is write-protected Boot Segment Program Flash Code Protection Size X11 = No Boot program Flash segment Boot space is 1K IW less VS 110 = Standard security; boot program Flash segment starts at End of VS, ends at 0007FEh 010 = High security; boot program Flash segment starts at End of VS, ends at 0007FEh Boot space is 4K IW less VS 101 = Standard security; boot program Flash segment starts at End of VS, ends at 001FFEh 001 = High security; boot program Flash segment starts at End of VS, ends at 001FFEh Boot space is 8K IW less VS 100 = Standard security; boot program Flash segment starts at End of VS, ends at 003FFEh 000 = High security; boot program Flash segment starts at End of VS, ends at 003FFEh RBS<1:0> FBS Boot Segment RAM Code Protection 11 = No Boot RAM defined 10 = Boot RAM is 128 Bytes 01 = Boot RAM is 256 Bytes 00 = Boot RAM is 1024 Bytes Secure Segment Program Flash Write Protection 1 = Secure segment may be written 0 = Secure segment is write-protected BSS<2:0> FBS SWRP FSS DS70593B-page 248 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 22-2: Bit Field SSS<2:0> dsPIC33FJXXXGPX06A/X08A/X10A CONFIGURATION BITS DESCRIPTION (CONTINUED) Register FSS Description Secure Segment Program Flash Code Protection Size (FOR 128K and 256K DEVICES) X11 = No Secure program Flash segment Secure space is 8K IW less BS 110 = Standard security; secure program Flash segment starts at End of BS, ends at 0x003FFE 010 = High security; secure program Flash segment starts at End of BS, ends at 0x003FFE Secure space is 16K IW less BS 101 = Standard security; secure program Flash segment starts at End of BS, ends at 0x007FFE 001 = High security; secure program Flash segment starts at End of BS, ends at 0x007FFE Secure space is 32K IW less BS 100 = Standard security; secure program Flash segment starts at End of BS, ends at 0x00FFFE 000 = High security; secure program Flash segment starts at End of BS, ends at 0x00FFFE (FOR 64K DEVICES) X11 = No Secure program Flash segment Secure space is 4K IW less BS 110 = Standard security; secure program Flash segment starts at End of BS, ends at 0x001FFE 010 = High security; secure program Flash segment starts at End of BS, ends at 0x001FFE Secure space is 8K IW less BS 101 = Standard security; secure program Flash segment starts at End of BS, ends at 0x003FFE 001 = High security; secure program Flash segment starts at End of BS, ends at 0x003FFE Secure space is 16K IW less BS 100 = Standard security; secure program Flash segment starts at End of BS, ends at 007FFEh 000 = High security; secure program Flash segment starts at End of BS, ends at 0x007FFE RSS<1:0> FSS Secure Segment RAM Code Protection 11 = No Secure RAM defined 10 = Secure RAM is 256 Bytes less BS RAM 01 = Secure RAM is 2048 Bytes less BS RAM 00 = Secure RAM is 4096 Bytes less BS RAM General Segment Code-Protect bit 11 = User program memory is not code-protected 10 = Standard security; general program Flash segment starts at End of SS, ends at EOM 0x = High security; general program Flash segment starts at End of SS, ends at EOM General Segment Write-Protect bit 1 = User program memory is not write-protected 0 = User program memory is write-protected GSS<1:0> FGS GWRP FGS 2009 Microchip Technology Inc. Preliminary DS70593B-page 249 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 22-2: Bit Field IESO dsPIC33FJXXXGPX06A/X08A/X10A CONFIGURATION BITS DESCRIPTION (CONTINUED) Register FOSCSEL Description Two-speed Oscillator Start-up Enable bit 1 = Start-up device with FRC, then automatically switch to the user-selected oscillator source when ready 0 = Start-up device with user-selected oscillator source Initial Oscillator Source Selection bits 111 = Internal Fast RC (FRC) oscillator with postscaler 110 = Internal Fast RC (FRC) oscillator with divide-by-16 101 = LPRC oscillator 100 = Secondary (LP) oscillator 011 = Primary (XT, HS, EC) oscillator with PLL 010 = Primary (XT, HS, EC) oscillator 001 = Internal Fast RC (FRC) oscillator with PLL 000 = FRC oscillator Clock Switching Mode bits 1x = Clock switching is disabled, Fail-Safe Clock Monitor is disabled 01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled 00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled OSC2 Pin Function bit (except in XT and HS modes) 1 = OSC2 is clock output 0 = OSC2 is general purpose digital I/O pin Primary Oscillator Mode Select bits 11 = Primary oscillator disabled 10 = HS Crystal Oscillator mode 01 = XT Crystal Oscillator mode 00 = EC (External Clock) mode Watchdog Timer Enable bit 1 = Watchdog Timer always enabled (LPRC oscillator cannot be disabled. Clearing the SWDTEN bit in the RCON register will have no effect.) 0 = Watchdog Timer enabled/disabled by user software (LPRC can be disabled by clearing the SWDTEN bit in the RCON register) Watchdog Timer Window Enable bit 1 = Watchdog Timer in Non-Window mode 0 = Watchdog Timer in Window mode PLL Lock Enable bit 1 = Clock switch to PLL source will wait until the PLL lock signal is valid. 0 = Clock switch will not wait for the PLL lock signal. Watchdog Timer Prescaler bit 1 = 1:128 0 = 1:32 Watchdog Timer Postscaler bits 1111 = 1:32,768 1110 = 1:16,384 * * * 0001 = 1:2 0000 = 1:1 FNOSC<2:0> FOSCSEL FCKSM<1:0> FOSC OSCIOFNC FOSC POSCMD<1:0> FOSC FWDTEN FWDT WINDIS FWDT PLLKEN FWDT WDTPRE FWDT WDTPOST FWDT DS70593B-page 250 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 22-2: Bit Field FPWRT<2:0> dsPIC33FJXXXGPX06A/X08A/X10A CONFIGURATION BITS DESCRIPTION (CONTINUED) Register FPOR Description Power-on Reset Timer Value Select bits 111 = PWRT = 128 ms 110 = PWRT = 64 ms 101 = PWRT = 32 ms 100 = PWRT = 16 ms 011 = PWRT = 8 ms 010 = PWRT = 4 ms 001 = PWRT = 2 ms 000 = PWRT = Disabled JTAG Enable bits 1 = JTAG enabled 0 = JTAG disabled ICD Communication Channel Select bits 11 = Communicate on PGEC1 and PGED1 10 = Communicate on PGEC2 and PGED2 01 = Communicate on PGEC3 and PGED3 00 = Reserved JTAGEN FICD ICS<1:0> FICD 2009 Microchip Technology Inc. Preliminary DS70593B-page 251 dsPIC33FJXXXGPX06A/X08A/X10A 22.2 On-Chip Voltage Regulator 22.3 BOR: Brown-out Reset All of the dsPIC33FJXXXGPX06A/X08A/X10A devices power their core digital logic at a nominal 2.5V. This may create an issue for designs that are required to operate at a higher typical voltage, such as 3.3V. To simplify system design, all devices in the dsPIC33FJXXXGPX06A/X08A/X10A family incorporate an on-chip regulator that allows the device to run its core logic from VDD. The regulator provides power to the core from the other VDD pins. The regulator requires that a low-ESR (less than 5 ohms) capacitor (such as tantalum or ceramic) be connected to the VCAP/ VDDCORE pin (Figure 22-1). This helps to maintain the stability of the regulator. The recommended value for the filter capacitor is provided in Table 25-13 of Section 25.0 "Electrical Characteristics". Note: It is important for the low-ESR capacitor to be placed as close as possible to the VCAP/VDDCORE pin. The BOR (Brown-out Reset) module is based on an internal voltage reference circuit that monitors the regulated voltage VCAP/VDDCORE. The main purpose of the BOR module is to generate a device Reset when a brown-out condition occurs. Brown-out conditions are generally caused by glitches on the AC mains (i.e., missing portions of the AC cycle waveform due to bad power transmission lines or voltage sags due to excessive current draw when a large inductive load is turned on). A BOR will generate a Reset pulse which will reset the device. The BOR will select the clock source, based on the device Configuration bit values (FNOSC<2:0> and POSCMD<1:0>). Furthermore, if an oscillator mode is selected, the BOR will activate the Oscillator Start-up Timer (OST). The system clock is held until OST expires. If the PLL is used, then the clock will be held until the LOCK bit (OSCCON<5>) is `1'. Concurrently, the PWRT time-out (TPWRT) will be applied before the internal Reset is released. If TPWRT = 0 and a crystal oscillator is being used, then a nominal delay of TFSCM = 100 is applied. The total delay in this case is TFSCM. The BOR Status bit (RCON<1>) will be set to indicate that a BOR has occurred. The BOR circuit continues to operate while in Sleep or Idle modes and will reset the device should VDD fall below the BOR threshold voltage. On a POR, it takes approximately 20 s for the on-chip voltage regulator to generate an output voltage. During this time, designated as TSTARTUP, code execution is disabled. TSTARTUP is applied every time the device resumes operation after any power-down. FIGURE 22-1: CONNECTIONS FOR THE ON-CHIP VOLTAGE REGULATOR(1) 3.3V dsPIC33F VDD VCAP/VDDCORE CEFC VSS Note 1: 2: These are typical operating voltages. Refer to Section TABLE 25-13: "Internal Voltage Regulator Specifications" located in Section 25.1 "DC Characteristics" for the full operating ranges of VDD and VCAP/ VDDCORE. It is important for the low-ESR capacitor to be placed as close as possible to the VCAP/ DS70593B-page 252 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 22.4 Watchdog Timer (WDT) For dsPIC33FJXXXGPX06A/X08A/X10A devices, the WDT is driven by the LPRC oscillator. When the WDT is enabled, the clock source is also enabled. The nominal WDT clock source from LPRC is 32 kHz. This feeds a prescaler and then can be configured for either 5-bit (divide-by-32) or 7-bit (divide-by-128) operation. The prescaler is set by the WDTPRE Configuration bit. With a 32 kHz input, the prescaler yields a nominal WDT time-out period (TWDT) of 1 ms in 5-bit mode, or 4 ms in 7-bit mode. A variable postscaler divides down the WDT prescaler output and allows for a wide range of time-out periods. The postscaler is controlled by the WDTPOST<3:0> Configuration bits (FWDT<3:0>) which allow the selection of a total of 16 settings, from 1:1 to 1:32,768. Using the prescaler and postscaler, time-out periods ranging from 1 ms to 131 seconds can be achieved. The WDT, prescaler and postscaler are reset: * On any device Reset * On the completion of a clock switch, whether invoked by software (i.e., setting the OSWEN bit after changing the NOSC bits) or by hardware (i.e., Fail-Safe Clock Monitor) * When a PWRSAV instruction is executed (i.e., Sleep or Idle mode is entered) * When the device exits Sleep or Idle mode to resume normal operation * By a CLRWDT instruction during normal execution If the WDT is enabled, it will continue to run during Sleep or Idle modes. When the WDT time-out occurs, the device will wake the device and code execution will continue from where the PWRSAV instruction was executed. The corresponding SLEEP or IDLE bits (RCON<3,2>) will need to be cleared in software after the device wakes up. The WDT flag bit, WDTO (RCON<4>), is not automatically cleared following a WDT time-out. To detect subsequent WDT events, the flag must be cleared in software. Note: The CLRWDT and PWRSAV instructions clear the prescaler and postscaler counts when executed. The WDT is enabled or disabled by the FWDTEN Configuration bit in the FWDT Configuration register. When the FWDTEN Configuration bit is set, the WDT is always enabled. The WDT can be optionally controlled in software when the FWDTEN Configuration bit has been programmed to `0'. The WDT is enabled in software by setting the SWDTEN control bit (RCON<5>). The SWDTEN control bit is cleared on any device Reset. The software WDT option allows the user to enable the WDT for critical code segments and disable the WDT during non-critical segments for maximum power savings. Note: If the WINDIS bit (FWDT<6>) is cleared, the CLRWDT instruction should be executed by the application software only during the last 1/4 of the WDT period. This CLRWDT window can be determined by using a timer. If a CLRWDT instruction is executed before this window, a WDT Reset occurs. FIGURE 22-2: WDT BLOCK DIAGRAM All Device Resets Transition to New Clock Source Exit Sleep or Idle Mode PWRSAV Instruction CLRWDT Instruction Watchdog Timer Sleep/Idle WDTPRE SWDTEN FWDTEN RS Prescaler (divide by N1) RS Postscaler (divide by N2) 0 1 WDT Reset WDTPOST<3:0> WDT Wake-up LPRC Clock WINDIS WDT Window Select CLRWDT Instruction 2009 Microchip Technology Inc. Preliminary DS70593B-page 253 dsPIC33FJXXXGPX06A/X08A/X10A 22.5 JTAG Interface 22.8 In-Circuit Debugger dsPIC33FJXXXGPX06A/X08A/X10A devices implement a JTAG interface, which supports boundary scan device testing, as well as in-circuit programming. Detailed information on the interface will be provided in future revisions of the document. When MPLAB(R) ICD 2 is selected as a debugger, the in-circuit debugging functionality is enabled. This function allows simple debugging functions when used with MPLAB IDE. Debugging functionality is controlled through the PGECx (Emulation/Debug Clock) and PGEDx (Emulation/Debug Data) pin functions. Any one out of three pairs of debugging clock/data pins may be used: * PGEC1 and PGED1 * PGEC2 and PGED2 * PGEC3 and PGED3 To use the in-circuit debugger function of the device, the design must implement ICSP connections to MCLR, VDD, VSS and the PGEDx/PGECx pin pair. In addition, when the feature is enabled, some of the resources are not available for general use. These resources include the first 80 bytes of data RAM and two I/O pins. 22.6 Code Protection and CodeGuardTM Security The dsPIC33F product families offer the advanced implementation of CodeGuardTM Security. CodeGuardTM Security enables multiple parties to securely share resources (memory, interrupts and peripherals) on a single chip. This feature helps protect individual Intellectual Property in collaborative system designs. When coupled with software encryption libraries, CodeGuard Security can be used to securely update Flash even when multiple IP are resident on the single chip. The code protection features vary depending on the actual dsPIC33F implemented. The following sections provide an overview of these features. The code protection features are controlled by the Configuration registers: FBS, FSS and FGS. Note: Refer to Section 23. "CodeGuardTM Security" (DS70199) in the "dsPIC33F/ PIC24H Family Reference Manual" for further information on usage, configuration and operation of CodeGuardTM Security. 22.7 In-Circuit Serial Programming dsPIC33FJXXXGPX06A/X08A/X10A family digital signal controllers can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data and three other lines for power, ground and the programming sequence. This allows customers to manufacture boards with unprogrammed devices and then program the digital signal controller just before shipping the product. This also allows the most recent firmware or a custom firmware, to be programmed. Please refer to the "dsPIC33F/PIC24H Flash Programming Specification" (DS70152) document for details about ICSP. Any one out of three pairs of programming clock/data pins may be used: * PGEC1 and PGED1 * PGEC2 and PGED2 * PGEC3 and PGED3 DS70593B-page 254 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 23.0 Note: INSTRUCTION SET SUMMARY This data sheet summarizes the features of the dsPIC33FJXXXGPX06A/X08A/ X10A family of devices. However, it is not intended to be a comprehensive reference source. To complement the information in this data sheet, refer to the latest family reference sections of the "dsPIC33F/ PIC24H Family Reference Manual", which are available from the Microchip website (www.microchip.com). Most bit-oriented instructions (including simple rotate/ shift instructions) have two operands: * The W register (with or without an address modifier) or file register (specified by the value of `Ws' or `f') * The bit in the W register or file register (specified by a literal value or indirectly by the contents of register `Wb') The literal instructions that involve data movement may use some of the following operands: * A literal value to be loaded into a W register or file register (specified by the value of `k') * The W register or file register where the literal value is to be loaded (specified by `Wb' or `f') However, literal instructions that involve arithmetic or logical operations use some of the following operands: * The first source operand which is a register `Wb' without any address modifier * The second source operand which is a literal value * The destination of the result (only if not the same as the first source operand) which is typically a register `Wd' with or without an address modifier The MAC class of DSP instructions may use some of the following operands: * The accumulator (A or B) to be used (required operand) * The W registers to be used as the two operands * The X and Y address space prefetch operations * The X and Y address space prefetch destinations * The accumulator write back destination The other DSP instructions do not involve any multiplication and may include: * The accumulator to be used (required) * The source or destination operand (designated as Wso or Wdo, respectively) with or without an address modifier * The amount of shift specified by a W register `Wn' or a literal value The control instructions may use some of the following operands: * A program memory address * The mode of the table read and table write instructions The dsPIC33F instruction set is identical to that of the dsPIC30F. Most instructions are a single program memory word (24 bits). Only three instructions require two program memory locations. Each single-word instruction is a 24-bit word, divided into an 8-bit opcode, which specifies the instruction type and one or more operands, which further specify the operation of the instruction. The instruction set is highly orthogonal and is grouped into five basic categories: * * * * * Word or byte-oriented operations Bit-oriented operations Literal operations DSP operations Control operations Table 23-1 illustrates the general symbols used in describing the instructions. The dsPIC33F instruction set summary in Table 23-2 provides all the instructions, along with the status flags affected by each instruction. Most word or byte-oriented W register instructions (including barrel shift instructions) have three operands: * The first source operand which is typically a register `Wb' without any address modifier * The second source operand which is typically a register `Ws' with or without an address modifier * The destination of the result which is typically a register `Wd' with or without an address modifier However, word or byte-oriented file register instructions have two operands: * The file register specified by the value `f' * The destination, which could either be the file register `f' or the W0 register, which is denoted as `WREG' 2009 Microchip Technology Inc. Preliminary DS70593B-page 255 dsPIC33FJXXXGPX06A/X08A/X10A All instructions are a single word, except for certain double-word instructions, which were made double-word instructions so that all the required information is available in these 48 bits. In the second word, the 8 MSbs are `0's. If this second word is executed as an instruction (by itself), it will execute as a NOP. Most single-word instructions are executed in a single instruction cycle, unless a conditional test is true, or the program counter is changed as a result of the instruction. In these cases, the execution takes two instruction cycles with the additional instruction cycle(s) executed as a NOP. Notable exceptions are the BRA (unconditional/computed branch), indirect CALL/GOTO, all table reads and writes and RETURN/RETFIE instructions, which are single-word instructions but take two or three cycles. Certain instructions that involve skipping over the subsequent instruction require either two or three cycles if the skip is performed, depending on whether the instruction being skipped is a single-word or two-word instruction. Moreover, double-word moves require two cycles. The double-word instructions execute in two instruction cycles. Note: For more details on the instruction set, refer to the "dsPIC30F/33F Programmer's Reference Manual" (DS70157). TABLE 23-1: Field #text (text) [text] {} SYMBOLS USED IN OPCODE DESCRIPTIONS Description Means literal defined by "text" Means "content of text" Means "the location addressed by text" Optional field or operation Register bit field Byte mode selection Double-Word mode selection Shadow register select Word mode selection (default) One of two accumulators {A, B} Accumulator write back destination address register {W13, [W13]+ = 2} 4-bit bit selection field (used in word addressed instructions) {0...15} MCU Status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero Absolute address, label or expression (resolved by the linker) File register address {0x0000...0x1FFF} 1-bit unsigned literal {0,1} 4-bit unsigned literal {0...15} 5-bit unsigned literal {0...31} 8-bit unsigned literal {0...255} 10-bit unsigned literal {0...255} for Byte mode, {0:1023} for Word mode 14-bit unsigned literal {0...16384} 16-bit unsigned literal {0...65535} 23-bit unsigned literal {0...8388608}; LSb must be `0' Field does not require an entry, may be blank DSP Status bits: AccA Overflow, AccB Overflow, AccA Saturate, AccB Saturate Program Counter 10-bit signed literal {-512...511} 16-bit signed literal {-32768...32767} 6-bit signed literal {-16...16} Base W register {W0..W15} Destination W register { Wd, [Wd], [Wd++], [Wd--], [++Wd], [--Wd] } Destination W register { Wnd, [Wnd], [Wnd++], [Wnd--], [++Wnd], [--Wnd], [Wnd+Wb] } Dividend, Divisor working register pair (direct addressing) DS70593B-page 256 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-1: Field Wm*Wm Wm*Wn Wn Wnd Wns WREG Ws Wso Wx SYMBOLS USED IN OPCODE DESCRIPTIONS (CONTINUED) Description Multiplicand and Multiplier working register pair for Square instructions {W4 * W4,W5 * W5,W6 * W6,W7 * W7} Multiplicand and Multiplier working register pair for DSP instructions {W4 * W5,W4 * W6,W4 * W7,W5 * W6,W5 * W7,W6 * W7} One of 16 working registers {W0..W15} One of 16 destination working registers {W0...W15} One of 16 source working registers {W0...W15} W0 (working register used in file register instructions) Source W register { Ws, [Ws], [Ws++], [Ws--], [++Ws], [--Ws] } Source W register { Wns, [Wns], [Wns++], [Wns--], [++Wns], [--Wns], [Wns+Wb] } X data space prefetch address register for DSP instructions {[W8]+ = 6, [W8]+ = 4, [W8]+ = 2, [W8], [W8]- = 6, [W8]- = 4, [W8]- = 2, [W9]+ = 6, [W9]+ = 4, [W9]+ = 2, [W9], [W9]- = 6, [W9]- = 4, [W9]- = 2, [W9 + W12], none} X data space prefetch destination register for DSP instructions {W4...W7} Y data space prefetch address register for DSP instructions {[W10]+ = 6, [W10]+ = 4, [W10]+ = 2, [W10], [W10]- = 6, [W10]- = 4, [W10]- = 2, [W11]+ = 6, [W11]+ = 4, [W11]+ = 2, [W11], [W11]- = 6, [W11]- = 4, [W11]- = 2, [W11 + W12], none} Y data space prefetch destination register for DSP instructions {W4...W7} Wxd Wy Wyd 2009 Microchip Technology Inc. Preliminary DS70593B-page 257 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-2: Base Instr # 1 Assembly Mnemonic ADD ADD ADD ADD ADD ADD ADD ADD 2 ADDC ADDC ADDC ADDC ADDC ADDC 3 AND AND AND AND AND AND 4 ASR ASR ASR ASR ASR ASR 5 BCLR BCLR BCLR 6 BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA BRA 7 BSET BSET BSET 8 BSW BSW.C BSW.Z 9 BTG BTG BTG INSTRUCTION SET OVERVIEW Assembly Syntax Acc f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd Wso,#Slit4,Acc f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd f f,WREG Ws,Wd Wb,Wns,Wnd Wb,#lit5,Wnd f,#bit4 Ws,#bit4 C,Expr GE,Expr GEU,Expr GT,Expr GTU,Expr LE,Expr LEU,Expr LT,Expr LTU,Expr N,Expr NC,Expr NN,Expr NOV,Expr NZ,Expr OA,Expr OB,Expr OV,Expr SA,Expr SB,Expr Expr Z,Expr Wn f,#bit4 Ws,#bit4 Ws,Wb Ws,Wb f,#bit4 Ws,#bit4 Description Add Accumulators f = f + WREG WREG = f + WREG Wd = lit10 + Wd Wd = Wb + Ws Wd = Wb + lit5 16-bit Signed Add to Accumulator f = f + WREG + (C) WREG = f + WREG + (C) Wd = lit10 + Wd + (C) Wd = Wb + Ws + (C) Wd = Wb + lit5 + (C) f = f .AND. WREG WREG = f .AND. WREG Wd = lit10 .AND. Wd Wd = Wb .AND. Ws Wd = Wb .AND. lit5 f = Arithmetic Right Shift f WREG = Arithmetic Right Shift f Wd = Arithmetic Right Shift Ws Wnd = Arithmetic Right Shift Wb by Wns Wnd = Arithmetic Right Shift Wb by lit5 Bit Clear f Bit Clear Ws Branch if Carry Branch if greater than or equal Branch if unsigned greater than or equal Branch if greater than Branch if unsigned greater than Branch if less than or equal Branch if unsigned less than or equal Branch if less than Branch if unsigned less than Branch if Negative Branch if Not Carry Branch if Not Negative Branch if Not Overflow Branch if Not Zero Branch if Accumulator A overflow Branch if Accumulator B overflow Branch if Overflow Branch if Accumulator A saturated Branch if Accumulator B saturated Branch Unconditionally Branch if Zero Computed Branch Bit Set f Bit Set Ws Write C bit to Ws DS70593B-page 258 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-2: Base Instr # 10 Assembly Mnemonic BTSC BTSC BTSC 11 BTSS BTSS BTSS 12 BTST BTST BTST.C BTST.Z BTST.C BTST.Z 13 BTSTS BTSTS BTSTS.C BTSTS.Z 14 CALL CALL CALL 15 CLR CLR CLR CLR CLR 16 17 CLRWDT COM CLRWDT COM COM COM 18 CP CP CP CP 19 CP0 CP0 CP0 20 CPB CPB CPB CPB 21 22 23 24 25 26 CPSEQ CPSGT CPSLT CPSNE DAW DEC CPSEQ CPSGT CPSLT CPSNE DAW DEC DEC DEC 27 DEC2 DEC2 DEC2 DEC2 28 DISI DISI f f,WREG Ws,Wd f Wb,#lit5 Wb,Ws f Ws f Wb,#lit5 Wb,Ws Wb, Wn Wb, Wn Wb, Wn Wb, Wn Wn f f,WREG Ws,Wd f f,WREG Ws,Wd #lit14 INSTRUCTION SET OVERVIEW (CONTINUED) Assembly Syntax f,#bit4 Ws,#bit4 f,#bit4 Ws,#bit4 f,#bit4 Ws,#bit4 Ws,#bit4 Ws,Wb Ws,Wb f,#bit4 Ws,#bit4 Ws,#bit4 lit23 Wn f WREG Ws Acc,Wx,Wxd,Wy,Wyd,AWB Description Bit Test f, Skip if Clear Bit Test Ws, Skip if Clear Bit Test f, Skip if Set Bit Test Ws, Skip if Set Bit Test f Bit Test Ws to C Bit Test Ws to Z Bit Test Ws 2009 Microchip Technology Inc. Preliminary DS70593B-page 259 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-2: Base Instr # 29 Assembly Mnemonic DIV DIV.S DIV.SD DIV.U DIV.UD 30 31 DIVF DO DIVF DO DO 32 33 34 35 36 37 38 ED EDAC EXCH FBCL FF1L FF1R GOTO ED EDAC EXCH FBCL FF1L FF1R GOTO GOTO 39 INC INC INC INC 40 INC2 INC2 INC2 INC2 41 IOR IOR IOR IOR IOR IOR 42 43 44 LAC LNK LSR LAC LNK LSR LSR LSR LSR LSR 45 MAC MAC INSTRUCTION SET OVERVIEW (CONTINUED) Assembly Syntax Wm,Wn Wm,Wn Wm,Wn Wm,Wn Wm,Wn #lit14,Expr Wn,Expr Wm*Wm,Acc,Wx,Wy,Wxd Wm*Wm,Acc,Wx,Wy,Wxd Wns,Wnd Ws,Wnd Ws,Wnd Ws,Wnd Expr Wn f f,WREG Ws,Wd f f,WREG Ws,Wd f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd Wso,#Slit4,Acc #lit14 f f,WREG Ws,Wd Wb,Wns,Wnd Wb,#lit5,Wnd Wm*Wn,Acc,Wx,Wxd,Wy,Wyd , AWB Wm*Wm,Acc,Wx,Wxd,Wy,Wyd f,Wn f f,WREG #lit16,Wn #lit8,Wn Wn,f Wso,Wdo WREG,f Wns,Wd Ws,Wnd Acc,Wx,Wxd,Wy,Wyd,AWB Description Signed 16/16-bit Integer Divide Signed 32/16-bit Integer Divide Unsigned 16/16-bit Integer Divide Unsigned 32/16-bit Integer Divide Signed 16/16-bit Fractional Divide Do code to PC + Expr, lit14 + 1 times Do code to PC + Expr, (Wn) + 1 times Euclidean Distance (no accumulate) Euclidean Distance Swap Wns with Wnd Find Bit Change from Left (MSb) Side Find First One from Left (MSb) Side Find First One from Right (LSb) Side Go to address Go to indirect f=f+1 WREG = f + 1 Wd = Ws + 1 f=f+2 WREG = f + 2 Wd = Ws + 2 f = f .IOR. WREG WREG = f .IOR. WREG Wd = lit10 .IOR. Wd Wd = Wb .IOR. Ws Wd = Wb .IOR. lit5 Load Accumulator Link Frame Pointer f = Logical Right Shift f WREG = Logical Right Shift f Wd = Logical Right Shift Ws Wnd = Logical Right Shift Wb by Wns Wnd = Logical Right Shift Wb by lit5 Multiply and Accumulate # of # of Words Cycles 1 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18 18 18 18 18 2 2 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Status Flags Affected N,Z,C,OV N,Z,C,OV N,Z,C,OV N,Z,C,OV N,Z,C,OV None None OA,OB,OAB, SA,SB,SAB OA,OB,OAB, SA,SB,SAB None C C C None None C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z N,Z N,Z N,Z N,Z N,Z OA,OB,OAB, SA,SB,SAB None C,N,OV,Z C,N,OV,Z C,N,OV,Z N,Z N,Z OA,OB,OAB, SA,SB,SAB OA,OB,OAB, SA,SB,SAB None N,Z N,Z None None None None N,Z None None None MAC 46 MOV MOV MOV MOV MOV MOV.b MOV MOV MOV MOV.D MOV.D 47 MOVSAC MOVSAC Square and Accumulate Move f to Wn Move f to f Move f to WREG Move 16-bit literal to Wn Move 8-bit literal to Wn Move Wn to f Move Ws to Wd Move WREG to f Move Double from W(ns):W(ns + 1) to Wd Move Double from Ws to W(nd + 1):W(nd) Prefetch and store accumulator 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 DS70593B-page 260 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-2: Base Instr # 48 Assembly Mnemonic MPY INSTRUCTION SET OVERVIEW (CONTINUED) Assembly Syntax MPY Wm*Wn,Acc,Wx,Wxd,Wy,Wyd MPY Wm*Wm,Acc,Wx,Wxd,Wy,Wyd Description Multiply Wm by Wn to Accumulator Square Wm to Accumulator -(Multiply Wm by Wn) to Accumulator Multiply and Subtract from Accumulator # of # of Words Cycles 1 1 1 1 1 1 1 1 Status Flags Affected OA,OB,OAB, SA,SB,SAB OA,OB,OAB, SA,SB,SAB None OA,OB,OAB, SA,SB,SAB None None None None None None None OA,OB,OAB, SA,SB,SAB C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z None None None None None All None None None None WDTO,Sleep None None None None None None None None C,N,Z C,N,Z C,N,Z N,Z N,Z N,Z C,N,Z C,N,Z C,N,Z 49 50 MPY.N MSC MPY.N Wm*Wn,Acc,Wx,Wxd,Wy,Wyd MSC Wm*Wm,Acc,Wx,Wxd,Wy,Wyd , AWB Wb,Ws,Wnd Wb,Ws,Wnd Wb,Ws,Wnd Wb,Ws,Wnd Wb,#lit5,Wnd Wb,#lit5,Wnd f Acc f f,WREG Ws,Wd 51 MUL MUL.SS MUL.SU MUL.US MUL.UU MUL.SU MUL.UU MUL {Wnd + 1, Wnd} = signed(Wb) * signed(Ws) {Wnd + 1, Wnd} = signed(Wb) * unsigned(Ws) {Wnd + 1, Wnd} = unsigned(Wb) * signed(Ws) {Wnd + 1, Wnd} = unsigned(Wb) * unsigned(Ws) {Wnd + 1, Wnd} = signed(Wb) * unsigned(lit5) {Wnd + 1, Wnd} = unsigned(Wb) * unsigned(lit5) W3:W2 = f * WREG Negate Accumulator f=f+1 WREG = f + 1 Wd = Ws + 1 No Operation No Operation 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 2 2 1 1 1 3 (2) 3 (2) 3 (2) 1 1 1 1 1 1 1 1 1 52 NEG NEG NEG NEG NEG 53 NOP NOP NOPR 54 POP POP POP POP.D POP.S f Wdo Wnd Pop f from Top-of-Stack (TOS) Pop from Top-of-Stack (TOS) to Wdo Pop from Top-of-Stack (TOS) to W(nd):W(nd + 1) Pop Shadow Registers 55 PUSH PUSH PUSH PUSH.D PUSH.S f Wso Wns Push f to Top-of-Stack (TOS) Push Wso to Top-of-Stack (TOS) Push W(ns):W(ns + 1) to Top-of-Stack (TOS) Push Shadow Registers #lit1 Go into Sleep or Idle mode Relative Call Computed Call Repeat Next Instruction lit14 + 1 times Repeat Next Instruction (Wn) + 1 times Software device Reset Return from interrupt 56 57 PWRSAV RCALL PWRSAV RCALL RCALL Expr Wn #lit14 Wn 58 REPEAT REPEAT REPEAT 59 60 61 62 63 RESET RETFIE RETLW RETURN RLC RESET RETFIE RETLW RETURN RLC RLC RLC f f,WREG Ws,Wd f f,WREG Ws,Wd f f,WREG Ws,Wd #lit10,Wn Return with literal in Wn Return from Subroutine f = Rotate Left through Carry f WREG = Rotate Left through Carry f Wd = Rotate Left through Carry Ws f = Rotate Left (No Carry) f WREG = Rotate Left (No Carry) f Wd = Rotate Left (No Carry) Ws f = Rotate Right through Carry f WREG = Rotate Right through Carry f Wd = Rotate Right through Carry Ws 64 RLNC RLNC RLNC RLNC 65 RRC RRC RRC RRC 2009 Microchip Technology Inc. Preliminary DS70593B-page 261 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 23-2: Base Instr # 66 Assembly Mnemonic RRNC RRNC RRNC RRNC 67 SAC SAC SAC.R 68 69 SE SETM SE SETM SETM SETM 70 SFTAC SFTAC SFTAC 71 SL SL SL SL SL SL 72 SUB SUB SUB SUB SUB SUB SUB 73 SUBB SUBB SUBB SUBB SUBB SUBB 74 SUBR SUBR SUBR SUBR SUBR 75 SUBBR SUBBR SUBBR SUBBR SUBBR 76 SWAP SWAP.b SWAP 77 78 79 80 81 82 TBLRDH TBLRDL TBLWTH TBLWTL ULNK XOR TBLRDH TBLRDL TBLWTH TBLWTL ULNK XOR XOR XOR XOR XOR 83 ZE ZE f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd Ws,Wnd INSTRUCTION SET OVERVIEW (CONTINUED) Assembly Syntax f f,WREG Ws,Wd Acc,#Slit4,Wdo Acc,#Slit4,Wdo Ws,Wnd f WREG Ws Acc,Wn Acc,#Slit6 f f,WREG Ws,Wd Wb,Wns,Wnd Wb,#lit5,Wnd Acc f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd f f,WREG #lit10,Wn Wb,Ws,Wd Wb,#lit5,Wd f f,WREG Wb,Ws,Wd Wb,#lit5,Wd f f,WREG Wb,Ws,Wd Wb,#lit5,Wd Wn Wn Ws,Wd Ws,Wd Ws,Wd Ws,Wd Description f = Rotate Right (No Carry) f WREG = Rotate Right (No Carry) f Wd = Rotate Right (No Carry) Ws Store Accumulator Store Rounded Accumulator Wnd = sign-extended Ws f = 0xFFFF WREG = 0xFFFF Ws = 0xFFFF Arithmetic Shift Accumulator by (Wn) Arithmetic Shift Accumulator by Slit6 f = Left Shift f WREG = Left Shift f Wd = Left Shift Ws Wnd = Left Shift Wb by Wns Wnd = Left Shift Wb by lit5 Subtract Accumulators f = f - WREG WREG = f - WREG Wn = Wn - lit10 Wd = Wb - Ws Wd = Wb - lit5 f = f - WREG - (C) WREG = f - WREG - (C) Wn = Wn - lit10 - (C) Wd = Wb - Ws - (C) Wd = Wb - lit5 - (C) f = WREG - f WREG = WREG - f Wd = Ws - Wb Wd = lit5 - Wb f = WREG - f - (C) WREG = WREG - f - (C) Wd = Ws - Wb - (C) Wd = lit5 - Wb - (C) Wn = nibble swap Wn Wn = byte swap Wn Read Prog<23:16> to Wd<7:0> Read Prog<15:0> to Wd Write Ws<7:0> to Prog<23:16> Write Ws to Prog<15:0> Unlink Frame Pointer f = f .XOR. WREG WREG = f .XOR. WREG Wd = lit10 .XOR. Wd Wd = Wb .XOR. Ws Wd = Wb .XOR. lit5 Wnd = Zero-extend Ws # of # of Words Cycles 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 Status Flags Affected N,Z N,Z N,Z None None C,N,Z None None None OA,OB,OAB, SA,SB,SAB OA,OB,OAB, SA,SB,SAB C,N,OV,Z C,N,OV,Z C,N,OV,Z N,Z N,Z OA,OB,OAB, SA,SB,SAB C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z C,DC,N,OV,Z None None None None None None None N,Z N,Z N,Z N,Z N,Z C,Z,N DS70593B-page 262 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 24.0 DEVELOPMENT SUPPORT 24.1 The PIC(R) microcontrollers and dsPIC(R) digital signal controllers are supported with a full range of software and hardware development tools: * Integrated Development Environment - MPLAB(R) IDE Software * Compilers/Assemblers/Linkers - MPLAB C Compiler for Various Device Families - HI-TECH C for Various Device Families - MPASMTM Assembler - MPLINKTM Object Linker/ MPLIBTM Object Librarian - MPLAB Assembler/Linker/Librarian for Various Device Families * Simulators - MPLAB SIM Software Simulator * Emulators - MPLAB REAL ICETM In-Circuit Emulator * In-Circuit Debuggers - MPLAB ICD 3 - PICkitTM 3 Debug Express * Device Programmers - PICkitTM 2 Programmer - MPLAB PM3 Device Programmer * Low-Cost Demonstration/Development Boards, Evaluation Kits, and Starter Kits MPLAB Integrated Development Environment Software The MPLAB IDE software brings an ease of software development previously unseen in the 8/16/32-bit microcontroller market. The MPLAB IDE is a Windows(R) operating system-based application that contains: * A single graphical interface to all debugging tools - Simulator - Programmer (sold separately) - In-Circuit Emulator (sold separately) - In-Circuit Debugger (sold separately) * A full-featured editor with color-coded context * A multiple project manager * Customizable data windows with direct edit of contents * High-level source code debugging * Mouse over variable inspection * Drag and drop variables from source to watch windows * Extensive on-line help * Integration of select third party tools, such as IAR C Compilers The MPLAB IDE allows you to: * Edit your source files (either C or assembly) * One-touch compile or assemble, and download to emulator and simulator tools (automatically updates all project information) * Debug using: - Source files (C or assembly) - Mixed C and assembly - Machine code MPLAB IDE supports multiple debugging tools in a single development paradigm, from the cost-effective simulators, through low-cost in-circuit debuggers, to full-featured emulators. This eliminates the learning curve when upgrading to tools with increased flexibility and power. 2009 Microchip Technology Inc. Preliminary DS70593B-page 263 dsPIC33FJXXXGPX06A/X08A/X10A 24.2 MPLAB C Compilers for Various Device Families 24.5 MPLINK Object Linker/ MPLIB Object Librarian The MPLAB C Compiler code development systems are complete ANSI C compilers for Microchip's PIC18, PIC24 and PIC32 families of microcontrollers and the dsPIC30 and dsPIC33 families of digital signal controllers. These compilers provide powerful integration capabilities, superior code optimization and ease of use. For easy source level debugging, the compilers provide symbol information that is optimized to the MPLAB IDE debugger. The MPLINK Object Linker combines relocatable objects created by the MPASM Assembler and the MPLAB C18 C Compiler. It can link relocatable objects from precompiled libraries, using directives from a linker script. The MPLIB Object Librarian manages the creation and modification of library files of precompiled code. When a routine from a library is called from a source file, only the modules that contain that routine will be linked in with the application. This allows large libraries to be used efficiently in many different applications. The object linker/library features include: * Efficient linking of single libraries instead of many smaller files * Enhanced code maintainability by grouping related modules together * Flexible creation of libraries with easy module listing, replacement, deletion and extraction 24.3 HI-TECH C for Various Device Families The HI-TECH C Compiler code development systems are complete ANSI C compilers for Microchip's PIC family of microcontrollers and the dsPIC family of digital signal controllers. These compilers provide powerful integration capabilities, omniscient code generation and ease of use. For easy source level debugging, the compilers provide symbol information that is optimized to the MPLAB IDE debugger. The compilers include a macro assembler, linker, preprocessor, and one-step driver, and can run on multiple platforms. 24.6 MPLAB Assembler, Linker and Librarian for Various Device Families 24.4 MPASM Assembler The MPASM Assembler is a full-featured, universal macro assembler for PIC10/12/16/18 MCUs. The MPASM Assembler generates relocatable object files for the MPLINK Object Linker, Intel(R) standard HEX files, MAP files to detail memory usage and symbol reference, absolute LST files that contain source lines and generated machine code and COFF files for debugging. The MPASM Assembler features include: * Integration into MPLAB IDE projects * User-defined macros to streamline assembly code * Conditional assembly for multi-purpose source files * Directives that allow complete control over the assembly process MPLAB Assembler produces relocatable machine code from symbolic assembly language for PIC24, PIC32 and dsPIC devices. MPLAB C Compiler uses the assembler to produce its object file. The assembler generates relocatable object files that can then be archived or linked with other relocatable object files and archives to create an executable file. Notable features of the assembler include: * * * * * * Support for the entire device instruction set Support for fixed-point and floating-point data Command line interface Rich directive set Flexible macro language MPLAB IDE compatibility DS70593B-page 264 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 24.7 MPLAB SIM Software Simulator 24.9 The MPLAB SIM Software Simulator allows code development in a PC-hosted environment by simulating the PIC MCUs and dsPIC(R) DSCs on an instruction level. On any given instruction, the data areas can be examined or modified and stimuli can be applied from a comprehensive stimulus controller. Registers can be logged to files for further run-time analysis. The trace buffer and logic analyzer display extend the power of the simulator to record and track program execution, actions on I/O, most peripherals and internal registers. The MPLAB SIM Software Simulator fully supports symbolic debugging using the MPLAB C Compilers, and the MPASM and MPLAB Assemblers. The software simulator offers the flexibility to develop and debug code outside of the hardware laboratory environment, making it an excellent, economical software development tool. MPLAB ICD 3 In-Circuit Debugger System MPLAB ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC(R) Flash microcontrollers and dsPIC(R) DSCs with the powerful, yet easyto-use graphical user interface of MPLAB Integrated Development Environment (IDE). The MPLAB ICD 3 In-Circuit Debugger probe is connected to the design engineer's PC using a high-speed USB 2.0 interface and is connected to the target with a connector compatible with the MPLAB ICD 2 or MPLAB REAL ICE systems (RJ-11). MPLAB ICD 3 supports all MPLAB ICD 2 headers. 24.8 MPLAB REAL ICE In-Circuit Emulator System 24.10 PICkit 3 In-Circuit Debugger/ Programmer and PICkit 3 Debug Express The MPLAB PICkit 3 allows debugging and programming of PIC(R) and dsPIC(R) Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 3 and MPLAB REAL ICE). The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial ProgrammingTM. The PICkit 3 Debug Express include the PICkit 3, demo board and microcontroller, hookup cables and CDROM with user's guide, lessons, tutorial, compiler and MPLAB IDE software. MPLAB REAL ICE In-Circuit Emulator System is Microchip's next generation high-speed emulator for Microchip Flash DSC and MCU devices. It debugs and programs PIC(R) Flash MCUs and dsPIC(R) Flash DSCs with the easy-to-use, powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit. The emulator is connected to the design engineer's PC using a high-speed USB 2.0 interface and is connected to the target with either a connector compatible with incircuit debugger systems (RJ11) or with the new highspeed, noise tolerant, Low-Voltage Differential Signal (LVDS) interconnection (CAT5). The emulator is field upgradable through future firmware downloads in MPLAB IDE. In upcoming releases of MPLAB IDE, new devices will be supported, and new features will be added. MPLAB REAL ICE offers significant advantages over competitive emulators including low-cost, full-speed emulation, run-time variable watches, trace analysis, complex breakpoints, a ruggedized probe interface and long (up to three meters) interconnection cables. 2009 Microchip Technology Inc. Preliminary DS70593B-page 265 dsPIC33FJXXXGPX06A/X08A/X10A 24.11 PICkit 2 Development Programmer/Debugger and PICkit 2 Debug Express The PICkitTM 2 Development Programmer/Debugger is a low-cost development tool with an easy to use interface for programming and debugging Microchip's Flash families of microcontrollers. The full featured Windows(R) programming interface supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit microcontrollers, and many Microchip Serial EEPROM products. With Microchip's powerful MPLAB Integrated Development Environment (IDE) the PICkitTM 2 enables in-circuit debugging on most PIC(R) microcontrollers. In-Circuit-Debugging runs, halts and single steps the program while the PIC microcontroller is embedded in the application. When halted at a breakpoint, the file registers can be examined and modified. The PICkit 2 Debug Express include the PICkit 2, demo board and microcontroller, hookup cables and CDROM with user's guide, lessons, tutorial, compiler and MPLAB IDE software. 24.13 Demonstration/Development Boards, Evaluation Kits, and Starter Kits A wide variety of demonstration, development and evaluation boards for various PIC MCUs and dsPIC DSCs allows quick application development on fully functional systems. Most boards include prototyping areas for adding custom circuitry and provide application firmware and source code for examination and modification. The boards support a variety of features, including LEDs, temperature sensors, switches, speakers, RS-232 interfaces, LCD displays, potentiometers and additional EEPROM memory. The demonstration and development boards can be used in teaching environments, for prototyping custom circuits and for learning about various microcontroller applications. In addition to the PICDEMTM and dsPICDEMTM demonstration/development board series of circuits, Microchip has a line of evaluation kits and demonstration software for analog filter design, KEELOQ(R) security ICs, CAN, IrDA(R), PowerSmart battery management, SEEVAL(R) evaluation system, Sigma-Delta ADC, flow rate sensing, plus many more. Also available are starter kits that contain everything needed to experience the specified device. This usually includes a single application and debug capability, all on one board. Check the Microchip web page (www.microchip.com) for the complete list of demonstration, development and evaluation kits. 24.12 MPLAB PM3 Device Programmer The MPLAB PM3 Device Programmer is a universal, CE compliant device programmer with programmable voltage verification at VDDMIN and VDDMAX for maximum reliability. It features a large LCD display (128 x 64) for menus and error messages and a modular, detachable socket assembly to support various package types. The ICSPTM cable assembly is included as a standard item. In Stand-Alone mode, the MPLAB PM3 Device Programmer can read, verify and program PIC devices without a PC connection. It can also set code protection in this mode. The MPLAB PM3 connects to the host PC via an RS-232 or USB cable. The MPLAB PM3 has high-speed communications and optimized algorithms for quick programming of large memory devices and incorporates an MMC card for file storage and data applications. DS70593B-page 266 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 25.0 ELECTRICAL CHARACTERISTICS This section provides an overview of dsPIC33FJXXXGPX06A/X08A/X10A electrical characteristics. Additional information will be provided in future revisions of this document as it becomes available. Absolute maximum ratings for the dsPIC33FJXXXGPX06A/X08A/X10A family are listed below. Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation of the device at these or any other conditions above the parameters indicated in the operation listings of this specification is not implied. Absolute Maximum Ratings(1) Ambient temperature under bias.............................................................................................................-40C to +125C Storage temperature .............................................................................................................................. -65C to +150C Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V Voltage on any pin that is not 5V tolerant with respect to VSS(4) .................................................... -0.3V to (VDD + 0.3V) Voltage on any 5V tolerant pin with respect to VSS when VDD 3.0V(4) .................................................. -0.3V to +5.6V Voltage on any 5V tolerant pin with respect to Vss when VDD < 3.0V(4) ......................................... -0.3V to (VDD + 0.3V) Voltage on VCAP/VDDCORE with respect to VSS ....................................................................................... 2.25V to 2.75V Maximum current out of VSS pin ...........................................................................................................................300 mA Maximum current into VDD pin(2) ...........................................................................................................................250 mA Maximum output current sunk by any I/O pin(3) ........................................................................................................4 mA Maximum output current sourced by any I/O pin(3) ...................................................................................................4 mA Maximum current sunk by all ports .......................................................................................................................200 mA Maximum current sourced by all ports(2) ...............................................................................................................200 mA Note 1: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. 2: Maximum allowable current is a function of device maximum power dissipation (see Table 25-2). 3: Exceptions are CLKOUT, which is able to sink/source 25 mA, and the VREF+, VREF-, SCLx, SDAx, PGECx and PGEDx pins, which are able to sink/source 12 mA. 4: See the "Pin Diagrams" section for 5V tolerant pins. 2009 Microchip Technology Inc. Preliminary DS70593B-page 267 dsPIC33FJXXXGPX06A/X08A/X10A 25.1 DC Characteristics OPERATING MIPS VS. VOLTAGE VDD Range (in Volts) 3.0-3.6V 3.0-3.6V Temp Range (in C) -40C to +85C -40C to +125C Max MIPS dsPIC33FJXXXGPX06A/X08A/X10A 40 40 TABLE 25-1: Characteristic DC5 TABLE 25-2: THERMAL OPERATING CONDITIONS Rating Symbol Min Typ Max Unit dsPIC33FJXXXGPX06A/X08A/X10A Operating Junction Temperature Range Operating Ambient Temperature Range Extended Temperature Devices Operating Junction Temperature Range Operating Ambient Temperature Range Power Dissipation: Internal chip power dissipation: PINT = VDD x (IDD - IOH) I/O Pin Power Dissipation: I/O = ({VDD - VOH} x IOH) + (VOL x IOL) Maximum Allowed Power Dissipation PDMAX (TJ - TA)/JA W TJ TA -40 -40 -- -- +140 +125 C C TJ TA -40 -40 -- -- +125 +85 C C PD PINT + PI/O W TABLE 25-3: THERMAL PACKAGING CHARACTERISTICS Characteristic Symbol Typ 40 40 40 40 28 Max -- -- -- -- -- Unit C/W C/W C/W C/W C/W Notes 1 1 1 1 1 Package Thermal Resistance, 100-pin TQFP (14x14x1 mm) Package Thermal Resistance, 100-pin TQFP (12x12x1 mm) Package Thermal Resistance, 80-pin TQFP (12x12x1 mm) Package Thermal Resistance, 64-pin TQFP (10x10x1 mm) Package Thermal Resistance, 64-pin QFN (9x9x0.9 mm) Note 1: JA JA JA JA JA Junction to ambient thermal resistance, Theta-JA (JA) numbers are achieved by package simulations. DS70593B-page 268 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Min Typ(1) Max Units Conditions DC CHARACTERISTICS Param Symbol No. Operating Voltage DC10 DC12 DC16 Supply Voltage VDD VDR VPOR -- RAM Data Retention Voltage VDD Start Voltage(4) to ensure internal Power-on Reset signal VDD Rise Rate to ensure internal Power-on Reset signal VDD Core(3) Internal regulator voltage (2) 3.0 1.8 -- -- -- -- 3.6 -- VSS V V V -- -- -- DC17 SVDD 0.03 -- -- V/ms 0-3.0V in 0.1s DC18 VCORE 2.25 -- 2.75 V Voltage is dependent on load, temperature and VDD Note 1: 2: 3: 4: Data in "Typ" column is at 3.3V, 25C unless otherwise stated. This is the limit to which VDD can be lowered without losing RAM data. These parameters are characterized but not tested in manufacturing. VDD voltage must remain at VSS for a minimum of 200 s to ensure POR. 2009 Microchip Technology Inc. Preliminary DS70593B-page 269 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Max Units Conditions DC CHARACTERISTICS Parameter No. Typical(1) Operating Current (IDD)(2) DC20d DC20a DC20b DC20c DC21d DC21a DC21b DC21c DC22d DC22a DC22b DC22c DC23d DC23a DC23b DC23c DC24d DC24a DC24b DC24c Note 1: 2: 27 27 27 27 36 37 38 39 43 46 46 47 65 65 65 65 84 84 84 84 30 30 30 35 40 40 45 45 50 50 55 55 70 70 70 70 90 90 90 90 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA -40C +25C +85C +125C -40C +25C +85C +125C -40C +25C +85C +125C -40C +25C +85C +125C -40C +25C +85C +125C 3.3V 40 MIPS 3.3V 30 MIPS 3.3V 20 MIPS 3.3V 16 MIPS 3.3V 10 MIPS Data in "Typical" column is at 3.3V, 25C unless otherwise stated. The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current consumption. The test conditions for all IDD measurements are as follows: OSC1 driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VSS. MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are operational. No peripheral modules are operating; however, every peripheral is being clocked (PMD bits are all zeroed). DS70593B-page 270 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Max Units Conditions DC CHARACTERISTICS Parameter No. Typical(1) Idle Current (IIDLE): Core OFF Clock ON Base Current(2) DC40d DC40a DC40b DC40c DC41d DC41a DC41b DC41c DC42d DC42a DC42b DC42c DC43a DC43d DC43b DC43c DC44d DC44a DC44b DC44c Note 1: 2: 3 3 3 3 4 5 6 6 8 9 10 10 15 15 15 15 16 16 16 16 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA -40C +25C +85C +125C -40C +25C +85C +125C -40C +25C +85C +125C +25C -40C +85C +125C -40C +25C +85C +125C 3.3V 40 MIPS 3.3V 30 MIPS 3.3V 20 MIPS 3.3V 16 MIPS 3.3V 10 MIPS Data in "Typical" column is at 3.3V, 25C unless otherwise stated. Base IIDLE current is measured with core off, clock on and all modules turned off. Peripheral Module Disable SFR registers are zeroed. All I/O pins are configured as inputs and pulled to VSS. 2009 Microchip Technology Inc. Preliminary DS70593B-page 271 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Max Units Conditions DC CHARACTERISTICS Parameter No. Typical(1) Power-Down Current (IPD)(2) DC60d DC60a DC60b DC60c DC61d DC61a DC61b DC61c Note 1: 2: 3: 4: 5: 400(4) 50(5) 400(4) 50(5) 500(4) 200(5) 1000(4) 600(5) 8 10 12 13 500(4) 200(5) 500(4) 200(5) 800(4) 500(5) 1500(4) 1000(5) 13 15 20 25 A A A A A A A A -40C +25C 3.3V +85C +125C -40C +25C +85C +125C 3.3V Watchdog Timer Current: IWDT(3) Base Power-Down Current(3) Data in the Typical column is at 3.3V, 25C unless otherwise stated. Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled to VSS. WDT, etc., are all switched off. The current is the additional current consumed when the module is enabled. This current should be added to the base IPD current. These characteristics apply to all devices with the exception of the dsPIC33FJXXXGP706A/708A/710A. These characteristics apply to dsPIC33FJXXXGP706A/708A/710 devices only. TABLE 25-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Max 35 30 30 50 30 30 50 30 30 50 30 30 Doze Ratio 1:2 1:64 1:128 1:2 1:64 1:128 1:2 1:64 1:128 1:2 1:64 1:128 Units mA mA mA mA mA mA mA mA mA mA mA mA +125C 3.3V 40 MIPS +85C 3.3V 40 MIPS +25C 3.3V 40 MIPS -40C 3.3V 40 MIPS Conditions DC CHARACTERISTICS Parameter No. DC73a DC73f DC73g DC70a DC70f DC70g DC71a DC71f DC71g DC72a DC72f DC72g Note 1: Typical(1) 11 11 11 42 26 25 41 25 24 42 26 25 Data in the Typical column is at 3.3V, 25C unless otherwise stated. DS70593B-page 272 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Input Low Voltage I/O pins MCLR I/O Pins with OSC1 or SOSCI I/O Pins with I2C I/O Pins with I C VIH DI20 ICNPU DI30 IIL DI50 DI51 Input Leakage Current(2,3) I/O Pins 5V Tolerant(4) I/O Pins Not 5V Tolerant(4) -- -- -- -- 2 1 A A VSS VPIN VDD, Pin at high-impedance VSS VPIN VDD, Pin at high-impedance, -40C TA +85C Shared with external reference pins, -40C TA +85C VSS VPIN VDD, Pin at high-impedance, -40C TA +125C Analog pins shared with external reference pins, -40C TA +125C VSS VPIN VDD VSS VPIN VDD, XT and HS modes Input High Voltage I/O Pins Not 5V Tolerant(4) I/O Pins 5V Tolerant(4) CNx Pull-up Current 50 250 400 A VDD = 3.3V, VPIN = VSS 0.7 VDD 0.7 VDD -- -- VDD 5.5 V V 2 DC CHARACTERISTICS Param Symbol No. VIL DI10 DI15 DI16 DI18 DI19 Min Typ(1) Max Units Conditions VSS VSS VSS VSS VSS -- -- -- -- -- 0.2 VDD 0.2 VDD 0.2 VDD 0.3 VDD 0.2 VDD V V V V V SMbus disabled SMbus enabled DI51a DI51b I/O Pins Not 5V Tolerant(4) I/O Pins Not 5V Tolerant(4) -- -- -- -- 2 3.5 A A DI51c I/O Pins Not 5V Tolerant(4) -- -- 8 A DI55 DI56 Note 1: 2: MCLR OSC1 -- -- -- -- 2 2 A A 3: 4: Data in "Typ" column is at 3.3V, 25C unless otherwise stated. The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. Negative current is defined as current sourced by the pin. See "Pin Diagrams (Continued)" for a list of 5V tolerant pins. 2009 Microchip Technology Inc. Preliminary DS70593B-page 273 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS DC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Output Low Voltage I/O ports OSC2/CLKO VOH DO20 DO26 Output High Voltage I/O ports OSC2/CLKO 2.40 2.41 -- -- -- -- V V IOH = -2.3 mA, VDD = 3.3V IOH = -1.3 mA, VDD = 3.3V -- -- -- -- 0.4 0.4 V V IOL = 2 mA, VDD = 3.3V IOL = 2 mA, VDD = 3.3V Min Typ Max Units Conditions Param Symbol No. VOL DO10 DO16 TABLE 25-11: ELECTRICAL CHARACTERISTICS: BOR DC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic BOR Event on VDD transition high-to-low BOR event is tied to VDD core voltage decrease Min(1) 2.40 Typ -- Max(1) 2.55 Units V Conditions -- Param No. BO10 Symbol VBOR Note 1: Parameters are for design guidance only and are not tested in manufacturing. DS70593B-page 274 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-12: DC CHARACTERISTICS: PROGRAM MEMORY DC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Program Flash Memory D130 D131 D132b D134 D135 D136a D136b D137a D137b D138a D138b Note 1: 2: EP VPR VPEW TRETD IDDP TRW TRW TPE TPE TWW TWW Cell Endurance VDD for Read VDD for Self-Timed Write Characteristic Retention Supply Current during Programming Row Write Time Row Write Time Page Erase Time Page Erase Time Word Write Cycle Time Word Write Cycle Time 10,000 VMIN VMIN 20 -- 1.32 1.28 20.1 19.5 42.3 41.1 -- -- -- -- 10 -- -- -- -- -- -- -- 3.6 3.6 -- -- 1.74 1.79 26.5 27.3 55.9 57.6 E/W V V VMIN = Minimum operating voltage VMIN = Minimum operating voltage Min Typ(1) Max Units Conditions Param Symbol No. Year Provided no other specifications are violated mA ms ms ms ms s s TRW = 11064 FRC cycles, TA = +85C, See Note 2 TRW = 11064 FRC cycles, TA = +125C, See Note 2 TPE = 168517 FRC cycles, TA = +85C, See Note 2 TPE = 168517 FRC cycles, TA = +125C, See Note 2 TWW = 355 FRC cycles, TA = +85C, See Note 2 TWW = 355 FRC cycles, TA = +125C, See Note 2 Data in "Typ" column is at 3.3V, 25C unless otherwise stated. Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max). This parameter depends on the FRC accuracy (see Table 25-19) and the value of the FRC Oscillator Tuning register (see Register 9-4). For complete details on calculating the Minimum and Maximum time see Section 5.3 "Programming Operations". TABLE 25-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Param No. Symbol CEFC Characteristics External Filter Capacitor Value Min 4.7 Typ 10 Max -- Units F Comments Capacitor must be low series resistance (< 5 ohms) 2009 Microchip Technology Inc. Preliminary DS70593B-page 275 dsPIC33FJXXXGPX06A/X08A/X10A 25.2 AC Characteristics and Timing Parameters The information contained in this section defines dsPIC33FJXXXGPX06A/X08A/X10A AC characteristics and timing parameters. TABLE 25-14: TEMPERATURE AND VOLTAGE SPECIFICATIONS - AC Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Operating voltage VDD range as described in Section 25.0 "Electrical Characteristics". AC CHARACTERISTICS FIGURE 25-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS Load Condition 2 - for OSC2 Load Condition 1 - for all pins except OSC2 VDD/2 RL Pin VSS CL Pin VSS CL RL = 464 CL = 50 pF for all pins except OSC2 15 pF for OSC2 output TABLE 25-15: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS Param Symbol No. DO50 COSC2 Characteristic OSC2/SOSC2 pin Min -- Typ -- Max 15 Units pF Conditions In XT and HS modes when external clock is used to drive OSC1 EC mode In I2CTM mode DO56 DO58 CIO CB All I/O pins and OSC2 SCLx, SDAx -- -- -- -- 50 400 pF pF DS70593B-page 276 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-2: EXTERNAL CLOCK TIMING Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 OS20 OS30 OS25 OS30 OS31 OS31 CLKO OS41 OS40 TABLE 25-16: EXTERNAL CLOCK TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic External CLKI Frequency (External clocks allowed only in EC and ECPLL modes) Oscillator Crystal Frequency Min DC Typ(1) -- Max 40 Units MHz Conditions EC Param No. OS10 Symbol FIN 3.5 10 -- 12.5 25 0.375 x TOSC -- -- -- 14 -- -- -- -- -- -- -- 5.2 5.2 16 10 40 33 DC DC 0.625 x TOSC 20 -- -- 18 MHz MHz kHz ns ns ns ns ns ns mA/V XT HS SOSC -- -- EC EC -- -- VDD = 3.3V TA = +25C OS20 OS25 OS30 OS31 OS40 OS41 OS42 Note 1: 2: TOSC TCY TosL, TosH TosR, TosF TckR TckF GM TOSC = 1/FOSC Instruction Cycle Time(2) External Clock in (OSC1) High or Low Time External Clock in (OSC1) Rise or Fall Time CLKO Rise Time(3) CLKO Fall Time (3) External Oscillator Transconductance(4) 3: 4: Data in "Typ" column is at 3.3V, 25C unless otherwise stated. Instruction cycle period (TCY) equals two times the input oscillator time-base period. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at "min." values with an external clock applied to the OSC1/CLKI pin. When an external clock input is used, the "max." cycle time limit is "DC" (no clock) for all devices. Measurements are taken in EC mode. The CLKO signal is measured on the OSC2 pin. Data for this parameter is Preliminary. This parameter is characterized, but not tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 277 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-17: PLL CLOCK TIMING SPECIFICATIONS (VDD = 3.0V TO 3.6V) AC CHARACTERISTICS Param No. OS50 Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic PLL Voltage Controlled Oscillator (VCO) Input Frequency Range(2) On-Chip VCO System Frequency PLL Start-up Time (Lock Time) CLKO Stability (Jitter) Min 0.8 Typ(1) -- Max 8.0 Units MHz Conditions ECPLL, HSPLL, XTPLL modes -- -- Measured over 100 ms period Symbol FPLLI OS51 OS52 OS53 Note 1: FSYS TLOCK DCLK 100 0.9 -3.0 -- 1.5 0.5 200 3.1 3.0 MHz ms % Data in "Typ" column is at 3.3V, 25C unless otherwise stated. TABLE 25-18: AC CHARACTERISTICS: INTERNAL FRC ACCURACY AC CHARACTERISTICS Param No. Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Min Typ Max Units Conditions Characteristic Internal FRC Accuracy @ FRC Frequency = 7.37 MHz(1,2) F20a F20b Note 1: 2: FRC FRC -2 -5 -- -- +2 +5 % % -40C TA +85C -40C TA +125C VDD = 3.0-3.6V VDD = 3.0-3.6V Frequency calibrated at 25C and 3.3V. TUN bits can be used to compensate for temperature drift. FRC is set to initial frequency of 7.37 MHz (2%) at 25C FRC. TABLE 25-19: INTERNAL LPRC ACCURACY AC CHARACTERISTICS Param No. Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Min Typ Max Units Conditions Characteristic LPRC @ 32.768 kHz(1) F21a F21b LPRC LPRC -30 -70(2) -35(3) -- --(2) --(3) +30 +70(2) +35(3) % % -40C TA +85C -40C TA +125C Note 1: 2: 3: Change of LPRC frequency as VDD changes. These characteristics apply to all devices with the exception of the dsPIC33FJ256GPX06A/X08A/X10A. These characteristics apply to dsPIC33FJ256GPX06A/X08A/X10A devices only. DS70593B-page 278 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-3: CLKO AND I/O TIMING CHARACTERISTICS I/O Pin (Input) DI35 DI40 I/O Pin (Output) Old Value DO31 DO32 Note: Refer to Figure 25-1 for load conditions. New Value TABLE 25-20: I/O TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Port Output Rise Time Port Output Fall Time INTx Pin High or Low Time (output) CNx High or Low Time (input) Min -- -- 20 2 Typ(1) 10 10 -- -- Max 25 25 -- -- Units ns ns ns TCY Conditions -- -- -- -- Param No. DO31 DO32 DI35 DI40 Note 1: Symbol TIOR TIOF TINP TRBP Data in "Typ" column is at 3.3V, 25C unless otherwise stated. 2009 Microchip Technology Inc. Preliminary DS70593B-page 279 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-4: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER AND POWER-UP TIMER TIMING CHARACTERISTICS VDD MCLR Internal POR SY12 SY10 SY11 PWRT Time-out OSC Time-out Internal Reset Watchdog Timer Reset SY13 I/O Pins SY35 FSCM Delay Note: Refer to Figure 25-1 for load conditions. SY20 SY13 SY30 DS70593B-page 280 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-21: RESET, WATCHDOG TIMER, OSCILLATOR START-UP TIMER, POWER-UP TIMER TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Min 2 -- -- -- -- -- -- -- 3 0.68 Typ(2) -- 2 4 8 16 32 64 128 10 0.72 Max -- -- -- -- -- -- -- -- 30 1.2 Units s ms Conditions -40C to +85C -40C to +85C User programmable Param Symbol No. SY10 SY11 TMCL TPWRT Characteristic(1) MCLR Pulse-Width (low) Power-up Timer Period SY12 SY13 TPOR TIOZ Power-on Reset Delay I/O High-Impedance from MCLR Low or Watchdog Timer Reset Watchdog Timer Time-out Period Oscillator Start-up Timer Period Fail-Safe Clock Monitor Delay s s -40C to +85C -- SY20 TWDT1 -- -- -- -- See Section 22.4 "Watchdog Timer (WDT)" and LPRC specification F21 (Table 25-19) TOSC = OSC1 period -40C to +85C SY30 SY35 Note 1: 2: TOST TFSCM -- -- 1024 TOSC 500 -- 900 -- s These parameters are characterized but not tested in manufacturing. Data in "Typ" column is at 3.3V, 25C unless otherwise stated. 2009 Microchip Technology Inc. Preliminary DS70593B-page 281 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-5: TIMER1, 2, 3, 4, 5, 6, 7, 8 AND 9 EXTERNAL CLOCK TIMING CHARACTERISTICS TxCK Tx10 Tx15 OS60 TMRx Tx11 Tx20 Note: Refer to Figure 25-1 for load conditions. TABLE 25-22: TIMER1 EXTERNAL CLOCK TIMING REQUIREMENTS(1) AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic TxCK High Time Synchronous, no prescaler Synchronous, with prescaler Asynchronous TA11 TTXL TxCK Low Time Synchronous, no prescaler Synchronous, with prescaler Asynchronous TA15 TTXP TxCK Input Period Synchronous, no prescaler Synchronous, with prescaler Asynchronous OS60 Ft1 SOSC1/T1CK Oscillator Input frequency Range (oscillator enabled by setting bit TCS (T1CON<1>)) Min 0.5 TCY + 20 10 10 0.5 TCY + 20 10 10 TCY + 40 Greater of: 20 ns or (TCY + 40)/N 20 DC Typ -- -- -- -- -- -- -- -- Max -- -- -- -- -- -- -- -- Units ns ns ns ns ns ns ns -- -- N = prescale value (1, 8, 64, 256) -- -- Must also meet parameter TA15 Conditions Must also meet parameter TA15 Param No. TA10 Symbol TTXH -- -- -- 50 ns kHz TA20 Note 1: TCKEXTMRL Delay from External TxCK Clock Edge to Timer Increment Timer1 is a Type A. 0.5 TCY -- 1.5 TCY -- -- DS70593B-page 282 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-23: TIMER2, TIMER4, TIMER6 AND TIMER8 EXTERNAL CLOCK TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic TxCK High Time Synchronous, no prescaler Synchronous, with prescaler TB11 TtxL TxCK Low Time Synchronous, no prescaler Synchronous, with prescaler TB15 TtxP TxCK Input Period Synchronous, no prescaler Synchronous, with prescaler TB20 TCKEXTMRL Param No. TB10 Symbol TtxH Min 0.5 TCY + 20 10 0.5 TCY + 20 10 TCY + 40 Greater of: 20 ns or (TCY + 40)/N 0.5 TCY Typ -- -- -- -- -- Max -- -- -- -- -- Units ns ns ns ns ns Conditions Must also meet parameter TB15 Must also meet parameter TB15 N = prescale value (1, 8, 64, 256) Delay from External TxCK Clock Edge to Timer Increment -- 1.5 TCY -- -- TABLE 25-24: TIMER3, TIMER5, TIMER7 AND TIMER9 EXTERNAL CLOCK TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic TxCK High Time TxCK Low Time Synchronous Synchronous Min 0.5 TCY + 20 0.5 TCY + 20 TCY + 40 Greater of: 20 ns or (TCY + 40)/N 0.5 TCY -- 1.5 TCY -- Typ -- -- -- Max -- -- -- Units ns ns ns Conditions Must also meet parameter TC15 Must also meet parameter TC15 N = prescale value (1, 8, 64, 256) Param No. TC10 TC11 TC15 Symbol TtxH TtxL TtxP TxCK Input Period Synchronous, no prescaler Synchronous, with prescaler TC20 TCKEXTMRL Delay from External TxCK Clock Edge to Timer Increment -- 2009 Microchip Technology Inc. Preliminary DS70593B-page 283 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-6: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS ICx IC10 IC15 Note: Refer to Figure 25-1 for load conditions. IC11 TABLE 25-25: INPUT CAPTURE TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) ICx Input Low Time ICx Input High Time ICx Input Period No Prescaler With Prescaler IC11 IC15 Note 1: TccH TccP No Prescaler With Prescaler Min 0.5 TCY + 20 10 0.5 TCY + 20 10 (TCY + 40)/N Max -- -- -- -- -- Units ns ns ns ns ns N = prescale value (1, 4, 16) -- Conditions -- Param No. IC10 Symbol TccL These parameters are characterized but not tested in manufacturing. FIGURE 25-7: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS OCx (Output Compare or PWM Mode) OC11 OC10 Note: Refer to Figure 25-1 for load conditions. TABLE 25-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Min -- -- Typ -- -- Max -- -- Units ns ns Conditions See parameter D032 See parameter D031 Param Symbol No. OC10 OC11 Note 1: TccF TccR Characteristic(1) OCx Output Fall Time OCx Output Rise Time These parameters are characterized but not tested in manufacturing. DS70593B-page 284 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-8: OC/PWM MODULE TIMING CHARACTERISTICS OC20 OCFA/OCFB OC15 OCx TABLE 25-27: SIMPLE OC/PWM MODE TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) Fault Input to PWM I/O Change Fault Input Pulse-Width Min -- 50 Typ -- -- Max 50 -- Units ns ns Conditions -- -- Param No. OC15 OC20 Note 1: Symbol TFD TFLT These parameters are characterized but not tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 285 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-9: SCKx (CKP = 0) SP11 SCKx (CKP = 1) SP35 SP20 SP21 SP10 SPIx MODULE MASTER MODE (CKE = 0) TIMING CHARACTERISTICS SP21 SP20 SDOx SP31 SDIx MSb Bit 14 - - - - - -1 SP30 Bit 14 - - - -1 LSb MSb In SP40 SP41 LSb In Note: Refer to Figure 25-1 for load conditions. TABLE 25-28: SPIx MASTER MODE (CKE = 0) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) SCKx Output Low Time SCKx Output High Time SCKx Output Fall Time SCKx Output Rise Time SDOx Data Output Fall Time SDOx Data Output Rise Time SDOx Data Output Valid after SCKx Edge Setup Time of SDIx Data Input to SCKx Edge Hold Time of SDIx Data Input to SCKx Edge Min TCY/2 TCY/2 -- -- -- -- -- 23 30 Typ(2) -- -- -- -- -- -- 6 -- -- Max -- -- -- -- -- -- 20 -- -- Units ns ns ns ns ns ns ns ns ns Conditions See Note 3 See Note 3 See parameter D032 and Note 4 See parameter D031 and Note 4 See parameter D032 and Note 4 See parameter D031 and Note 4 -- -- -- Param No. SP10 SP11 SP20 SP21 SP30 SP31 SP35 SP40 SP41 Note 1: 2: 3: 4: Symbol TscL TscH TscF TscR TdoF TdoR TscH2doV, TscL2doV TdiV2scH, TdiV2scL TscH2diL, TscL2diL These parameters are characterized but not tested in manufacturing. Data in "Typ" column is at 3.3V, 25C unless otherwise stated. The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not violate this specification. Assumes 50 pF load on all SPIx pins. DS70593B-page 286 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-10: SPIx MODULE MASTER MODE (CKE = 1) TIMING CHARACTERISTICS SP36 SCKX (CKP = 0) SP11 SP10 SP21 SP20 SCKX (CKP = 1) SP35 SP20 SP21 SDOX MSb SP40 Bit 14 - - - - - -1 SP30,SP31 Bit 14 - - - -1 LSb SDIX MSb In SP41 LSb In Note: Refer to Figure 25-1 for load conditions. TABLE 25-29: SPIx MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) SCKx Output Low Time(3) SCKx Output High Time(3) SCKx Output Fall Time(4) SCKx Output Rise Time(4) SDOx Data Output Fall Time(4) SDOx Data Output Rise Time(4) Min TCY/2 TCY/2 -- -- -- -- -- 30 23 30 Typ(2) -- -- -- -- -- -- 6 -- -- -- Max -- -- -- -- -- -- 20 -- -- -- Units ns ns ns ns ns ns ns ns ns ns Conditions -- -- See parameter D032 See parameter D031 See parameter D032 See parameter D031 -- -- -- -- Param No. SP10 SP11 SP20 SP21 SP30 SP31 SP35 SP36 SP40 SP41 Note 1: 2: 3: 4: Symbol TscL TscH TscF TscR TdoF TdoR TscH2doV, SDOx Data Output Valid after TscL2doV SCKx Edge TdoV2sc, SDOx Data Output Setup to TdoV2scL First SCKx Edge TdiV2scH, Setup Time of SDIx Data TdiV2scL Input to SCKx Edge TscH2diL, TscL2diL Hold Time of SDIx Data Input to SCKx Edge These parameters are characterized but not tested in manufacturing. Data in "Typ" column is at 3.3V, 25C unless otherwise stated. The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not violate this specification. Assumes 50 pF load on all SPIx pins. 2009 Microchip Technology Inc. Preliminary DS70593B-page 287 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-11: SSX SP50 SCKX (CKP = 0) SP71 SP70 SP73 SP72 SP52 SPIx MODULE SLAVE MODE (CKE = 0) TIMING CHARACTERISTICS SCKX (CKP = 1) SP35 SDOX MSb SP72 SP73 Bit 14 - - - - - -1 SP30,SP31 LSb SP51 LSb In SDIX MSb In SP41 SP40 Bit 14 - - - -1 Note: Refer to Figure 25-1 for load conditions. TABLE 25-30: SPIx MODULE SLAVE MODE (CKE = 0) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) SCKx Input Low Time SCKx Input High Time SCKx Input Fall Time(3) SCKx Input Rise Time(3) SDOx Data Output Fall Time (3) Param No. SP70 SP71 SP72 SP73 SP30 SP31 SP35 SP40 SP41 SP50 SP51 SP52 Symbol TscL TscH TscF TscR TdoF TdoR TscH2doV, TscL2doV TdiV2scH, TdiV2scL TscH2diL, TscL2diL TssL2scH, TssL2scL TssH2doZ Min 30 30 -- -- -- -- -- 20 20 120 10 Typ(2) -- -- 10 10 -- -- -- -- -- -- -- Max -- -- 25 25 -- -- 30 -- -- -- 50 Units ns ns ns ns ns ns ns ns ns ns ns ns Conditions -- -- -- -- See parameter D032 See parameter D031 -- -- -- -- -- -- SDOx Data Output Rise Time(3) SDOx Data Output Valid after SCKx Edge Setup Time of SDIx Data Input to SCKx Edge Hold Time of SDIx Data Input to SCKx Edge SSx to SCKx or SCKx Input SSx to SDOx Output High-Impedance(3) 1.5 TCY + 40 -- -- TscH2ssH SSx after SCKx Edge TscL2ssH Note 1: These parameters are characterized but not tested in manufacturing. 2: Data in "Typ" column is at 3.3V, 25C unless otherwise stated. 3: Assumes 50 pF load on all SPIx pins. DS70593B-page 288 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-12: SSx SP50 SCKx (CKP = 0) SP71 SCKx (CKP = 1) SP35 SP72 MSb Bit 14 - - - - - -1 SP30,SP31 SDIx SDI MSb In SP41 SP40 Note: Refer to Figure 25-1 for load conditions. Bit 14 - - - -1 LSb In LSb SP51 SP73 SP70 SP73 SP72 SP52 SPIx MODULE SLAVE MODE (CKE = 1) TIMING CHARACTERISTICS SP60 SDOx 2009 Microchip Technology Inc. Preliminary DS70593B-page 289 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-31: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) SCKx Input Low Time SCKx Input High Time SCKx Input Fall Time(3) Time(3) SCKx Input Rise Time(3) SDOx Data Output Fall SDOx Data Output Rise Time(3) Min 30 30 -- -- -- -- -- 20 20 120 10 1.5 TCY + 40 -- Typ(2) -- -- 10 10 -- -- -- -- -- -- -- -- -- Max -- -- 25 25 -- -- 30 -- -- -- 50 -- 50 Units ns ns ns ns ns ns ns ns ns ns ns ns ns Conditions -- -- -- -- See parameter D032 See parameter D031 -- -- -- -- -- -- -- Param No. SP70 SP71 SP72 SP73 SP30 SP31 SP35 SP40 SP41 SP50 SP51 SP52 SP60 Note 1: 2: 3: 4: Symbol TscL TscH TscF TscR TdoF TdoR TscH2doV, SDOx Data Output Valid after TscL2doV SCKx Edge TdiV2scH, Setup Time of SDIx Data Input TdiV2scL to SCKx Edge TscH2diL, Hold Time of SDIx Data Input TscL2diL to SCKx Edge TssL2scH, SSx to SCKx or SCKx TssL2scL Input TssH2doZ SSx to SDOX Output High-Impedance(4) TscH2ssH SSx after SCKx Edge TscL2ssH TssL2doV SDOx Data Output Valid after SSx Edge These parameters are characterized but not tested in manufacturing. Data in "Typ" column is at 3.3V, 25C unless otherwise stated. The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not violate this specification. Assumes 50 pF load on all SPIx pins. DS70593B-page 290 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-13: I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (MASTER MODE) SCLx IM31 IM30 IM33 IM34 SDAx Start Condition Note: Refer to Figure 25-1 for load conditions. Stop Condition FIGURE 25-14: I2Cx BUS DATA TIMING CHARACTERISTICS (MASTER MODE) IM20 IM11 IM10 IM21 SCLx IM11 IM10 IM26 IM25 IM33 SDAx In IM40 IM40 IM45 SDAx Out Note: Refer to Figure 25-1 for load conditions. 2009 Microchip Technology Inc. Preliminary DS70593B-page 291 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-32: I2Cx BUS DATA TIMING REQUIREMENTS (MASTER MODE) AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic Min(1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) -- 20 + 0.1 CB -- -- 20 + 0.1 CB -- 250 100 40 0 0 0.2 TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) TCY/2 (BRG + 1) -- -- -- 4.7 1.3 0.5 -- Max -- -- -- -- -- -- 300 300 100 1000 300 300 -- -- -- -- 0.9 -- -- -- -- -- -- -- -- -- -- -- -- -- 3500 1000 400 -- -- -- 400 Units s s s s s s ns ns ns ns ns ns ns ns ns s s s s s s s s s s s s ns ns ns ns ns ns s s s pF -- -- Conditions -- -- -- -- -- -- CB is specified to be from 10 to 400 pF CB is specified to be from 10 to 400 pF -- Param Symbol No. IM10 TLO:SCL Clock Low Time 100 kHz mode 400 kHz mode 1 MHz mode(2) IM11 THI:SCL Clock High Time 100 kHz mode 400 kHz mode 1 MHz mode(2) SDAx and SCLx 100 kHz mode Fall Time 400 kHz mode 1 MHz mode(2) SDAx and SCLx 100 kHz mode Rise Time 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode 1 MHz mode(2) 100 kHz mode 400 kHz mode IM20 TF:SCL IM21 TR:SCL IM25 TSU:DAT Data Input Setup Time THD:DAT Data Input Hold Time TSU:STA Start Condition Setup Time IM26 IM30 Only relevant for Repeated Start condition After this period the first clock pulse is generated -- IM31 THD:STA Start Condition Hold Time TSU:STO Stop Condition Setup Time THD:STO Stop Condition Hold Time TAA:SCL Output Valid From Clock IM33 IM34 IM40 -- -- -- Time the bus must be free before a new transmission can start -- IM45 TBF:SDA Bus Free Time IM50 CB 1 MHz mode(2) Bus Capacitive Loading Pulse Gobbler Delay 65 390 ns See Note 3 IM51 TPGD 2 Note 1: BRG is the value of the I C Baud Rate Generator. Refer to Section 19. "Inter-Integrated CircuitTM (I2CTM)" (DS70195) in the "dsPIC33F/PIC24H Family Reference Manual". 2: Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only). 3: Typical value for this parameter is 130 ns. DS70593B-page 292 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-15: I2Cx BUS START/STOP BITS TIMING CHARACTERISTICS (SLAVE MODE) SCLx IS31 IS30 IS33 IS34 SDAx Start Condition Stop Condition FIGURE 25-16: I2Cx BUS DATA TIMING CHARACTERISTICS (SLAVE MODE) IS20 IS11 IS10 IS30 IS26 IS21 SCLx IS31 IS25 IS33 SDAx In IS40 IS40 IS45 SDAx Out 2009 Microchip Technology Inc. Preliminary DS70593B-page 293 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-33: I2Cx BUS DATA TIMING REQUIREMENTS (SLAVE MODE) AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic 100 kHz mode 400 kHz mode 1 MHz mode(1) 100 kHz mode 400 kHz mode Min 4.7 1.3 0.5 4.0 0.6 Max -- -- -- -- -- Units s s s s s Conditions Device must operate at a minimum of 1.5 MHz Device must operate at a minimum of 10 MHz -- Device must operate at a minimum of 1.5 MHz Device must operate at a minimum of 10 MHz -- CB is specified to be from 10 to 400 pF CB is specified to be from 10 to 400 pF -- Param No. IS10 Symbol TLO:SCL Clock Low Time IS11 THI:SCL Clock High Time IS20 IS21 IS25 IS26 IS30 IS31 IS33 IS34 IS40 IS45 IS50 Note 0.5 -- s 1 MHz mode(1) TF:SCL SDAx and SCLx 100 kHz mode -- 300 ns Fall Time 300 ns 400 kHz mode 20 + 0.1 CB 1 MHz mode(1) -- 100 ns TR:SCL SDAx and SCLx 100 kHz mode -- 1000 ns Rise Time 300 ns 400 kHz mode 20 + 0.1 CB 1 MHz mode(1) -- 300 ns TSU:DAT Data Input 100 kHz mode 250 -- ns Setup Time 400 kHz mode 100 -- ns (1) 1 MHz mode 100 -- ns THD:DAT Data Input 100 kHz mode 0 -- s Hold Time 400 kHz mode 0 0.9 s 1 MHz mode(1) 0 0.3 s TSU:STA Start Condition 100 kHz mode 4.7 -- s Setup Time 400 kHz mode 0.6 -- s 0.25 -- s 1 MHz mode(1) THD:STA Start Condition 100 kHz mode 4.0 -- s Hold Time 400 kHz mode 0.6 -- s 0.25 -- s 1 MHz mode(1) TSU:STO Stop Condition 100 kHz mode 4.7 -- s Setup Time 400 kHz mode 0.6 -- s (1) 1 MHz mode 0.6 -- s THD:STO Stop Condition 100 kHz mode 4000 -- ns Hold Time 400 kHz mode 600 -- ns 1 MHz mode(1) 250 ns TAA:SCL Output Valid 100 kHz mode 0 3500 ns From Clock 400 kHz mode 0 1000 ns 1 MHz mode(1) 0 350 ns TBF:SDA Bus Free Time 100 kHz mode 4.7 -- s 400 kHz mode 1.3 -- s 0.5 -- s 1 MHz mode(1) CB Bus Capacitive Loading -- 400 pF 1: Maximum pin capacitance = 10 pF for all I2Cx pins (for 1 MHz mode only). -- Only relevant for Repeated Start condition After this period, the first clock pulse is generated -- -- -- Time the bus must be free before a new transmission can start -- DS70593B-page 294 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-17: DCI MODULE (MULTI-CHANNEL, I2S MODES) TIMING CHARACTERISTICS CSCK (SCKE = 0) CS11 CSCK (SCKE = 1) CS20 COFS CS55 CS56 CS35 CS51 CSDO High-Z CS50 MSb CS30 CSDI MSb In CS40 CS41 CS31 LSb In LSb 70 High-Z CS21 CS10 CS21 CS20 Note: Refer to Figure 25-1 for load conditions. 2009 Microchip Technology Inc. Preliminary DS70593B-page 295 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-34: DCI MODULE (MULTI-CHANNEL, I2S MODES) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic(1) CSCK Input Low Time (CSCK pin is an input) CSCK Output Low Time(3) (CSCK pin is an output) CS11 TCSCKH CSCK Input High Time (CSCK pin is an input) CSCK Output High Time(3) (CSCK pin is an output) CS20 CS21 CS30 CS31 CS35 CS36 CS40 TCSCKF TCSCKR TCSDOF TCSDOR TDV TDIV TCSDI CSCK Output Fall Time(4) (CSCK pin is an output) CSCK Output Rise Time(4) (CSCK pin is an output) CSDO Data Output Fall Time(4) CSDO Data Output Rise Time(4) Clock Edge to CSDO Data Valid Clock Edge to CSDO Tri-Stated Setup Time of CSDI Data Input to CSCK Edge (CSCK pin is input or output) Hold Time of CSDI Data Input to CSCK Edge (CSCK pin is input or output) COFS Fall Time (COFS pin is output) COFS Rise Time (COFS pin is output) Setup Time of COFS Data Input to CSCK Edge (COFS pin is input) Hold Time of COFS Data Input to CSCK Edge (COFS pin is input) Min TCY/2 + 20 30 TCY/2 + 20 30 -- -- -- -- -- 10 20 Typ(2) -- -- -- -- 10 10 10 10 -- -- -- Max -- -- -- -- 25 25 25 25 10 20 -- Units ns ns ns ns ns ns ns ns ns ns ns Conditions -- -- -- -- -- -- -- -- -- -- -- Param No. CS10 Symbol TCSCKL CS41 THCSDI 20 -- -- ns -- CS50 CS51 CS55 TCOFSF TCOFSR TSCOFS -- -- 20 10 10 -- 25 25 -- ns ns ns Note 1 Note 1 -- CS56 Note 1: 2: 3: 4: THCOFS 20 -- -- ns -- These parameters are characterized but not tested in manufacturing. Data in "Typ" column is at 3.3V, 25C unless otherwise stated. Parameters are for design guidance only and are not tested. The minimum clock period for CSCK is 100 ns. Therefore, the clock generated in Master mode must not violate this specification. Assumes 50 pF load on all DCI pins. DS70593B-page 296 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-18: BIT_CLK (CSCK) CS61 CS60 CS62 CS21 CS20 DCI MODULE (AC-LINK MODE) TIMING CHARACTERISTICS CS71 CS72 SYNC (COFS) CS76 CS80 CS70 CS75 SDOx (CSDO) LSb MSb LSb CS76 CS75 SDIx (CSDI) MSb In CS65 CS66 TABLE 25-35: DCI MODULE (AC-LINK MODE) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1,2) Min Typ(3) Max Units Conditions Param No. CS60 CS61 CS62 CS65 CS66 CS70 CS71 CS72 CS75 CS76 CS77 CS78 CS80 Note Symbol TBCLKL TBCLKH TBCLK TSACL BIT_CLK Low Time 36 40.7 45 ns -- BIT_CLK High Time 36 40.7 45 ns -- BIT_CLK Period -- 81.4 -- ns Bit clock is input Input Setup Time to -- -- 10 ns -- Falling Edge of BIT_CLK Input Hold Time from -- -- 10 ns -- THACL Falling Edge of BIT_CLK TSYNCLO SYNC Data Output Low Time -- 19.5 -- s Note 1 TSYNCHI SYNC Data Output High Time -- 1.3 -- s Note 1 TSYNC SYNC Data Output Period -- 20.8 -- s Note 1 TRACL Rise Time, SYNC, SDATA_OUT -- 10 25 ns CLOAD = 50 pF, VDD = 5V Fall Time, SYNC, SDATA_OUT -- 10 25 ns CLOAD = 50 pF, VDD = 5V TFACL TRACL Rise Time, SYNC, SDATA_OUT -- -- 30 ns CLOAD = 50 pF, VDD = 3V TFACL Fall Time, SYNC, SDATA_OUT -- -- 30 ns CLOAD = 50 pF, VDD = 3V -- -- 15 ns -- TOVDACL Output Valid Delay from Rising Edge of BIT_CLK 1: These parameters are characterized but not tested in manufacturing. 2: These values assume BIT_CLK frequency is 12.288 MHz. 3: Data in "Typ" column is at 3.3V, 25C unless otherwise stated. Parameters are for design guidance only and are not tested. 2009 Microchip Technology Inc. Preliminary DS70593B-page 297 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-19: CAN MODULE I/O TIMING CHARACTERISTICS CiTx Pin (output) Old Value CA10 CA11 New Value CiRx Pin (input) CA20 TABLE 25-36: ECANTM MODULE I/O TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C -40C TA +125C for Extended Characteristic(1) Port Output Fall Time Port Output Rise Time Pulse Width to Trigger CAN Wake-up Filter AC CHARACTERISTICS Param No. CA10 CA11 CA20 Note 1: Symbol TioF TioR Tcwf Min -- -- 120 Typ -- -- -- Max -- -- -- Units ns ns ns Conditions See parameter D032 See parameter D031 -- These parameters are characterized but not tested in manufacturing. DS70593B-page 298 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-37: ADC MODULE SPECIFICATIONS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Min. Typ Max. Units Conditions Param Symbol No. Characteristic Device Supply AD01 AVDD Module VDD Supply Greater of VDD - 0.3 or 3.0 VSS - 0.3 -- Lesser of VDD + 0.3 or 3.6 VSS + 0.3 AVDD 3.6 AVDD - 2.7 0 3.6 1 9.0 3.2 VREFH V -- AD02 AD05 AD05a AD06 AD06a AD07 AD08 AD08a AVSS VREFH Module VSS Supply -- -- -- -- -- -- -- 7.0 2.7 -- V V V V V V A mA mA V See Note 2 -- Reference Inputs Reference Voltage High AVSS + 2.7 3.0 VREFL Reference Voltage Low AVSS 0 VREF IREF IAD Absolute Reference Voltage Current Drain Operating Current 3.0 -- -- -- VINL VREFH = AVDD VREFL = AVSS = 0 See Note 2 VREFH = AVDD VREFL = AVSS = 0 VREF = VREFH - VREFL ADC off 10-bit ADC mode, See Note 1 12-bit ADC mode, See Note 1 This voltage reflects Sample and Hold Channels 0, 1, 2, and 3 (CH0-CH3), positive input. See Note 1 This voltage reflects Sample and Hold Channels 0, 1, 2, and 3 (CH0-CH3), negative input. See Note 1 10-bit 12-bit Analog Input AD12 VINH Input Voltage Range VINH AD13 VINL Input Voltage Range VINL VREFL -- AVSS + 1V V AD17 RIN Recommended Impedance of Analog Voltage Source -- -- 200 200 Note 1: 2: The ADC conversion result never decreases with an increase in the input voltage, and has no missing codes. These parameters are not characterized or tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 299 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-38: ADC MODULE SPECIFICATIONS (12-BIT MODE) AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Min. Typ Max. Units Conditions Param No. Symbol ADC Accuracy (12-bit Mode) - Measurements with external VREF+/VREFAD20a Nr AD21a INL AD22a DNL AD23a GERR AD24a EOFF AD25a -- AD20a Nr AD21a INL AD22a DNL AD23a GERR AD24a EOFF AD25a -- AD30a THD AD31a SINAD AD32a SFDR AD33a FNYQ AD34a ENOB Note 1: Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Monotonicity(1) Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Monotonicity(1) Total Harmonic Distortion Signal to Noise and Distortion Spurious Free Dynamic Range Input Signal Band-Width Effective Number of Bits -2 >-1 2 2 -- -- 68.5 80 -- 11.09 -2 >-1 1.25 -0.2 -- 12 data bits -- -- 3.4 0.9 -- 12 data bits -- -- 10.5 3.8 -- -- 69.5 -- -- 11.3 +2 <1 20 10 -- -75 -- -- 250 -- +2 <1 10 5 -- bits LSb LSb LSb LSb -- bits LSb LSb LSb LSb -- dB dB dB kHz bits VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V Guaranteed -- -- -- -- -- VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V Guaranteed ADC Accuracy (12-bit Mode) - Measurements with internal VREF+/VREF- Dynamic Performance (12-bit Mode) The ADC conversion result never decreases with an increase in the input voltage, and has no missing codes. DS70593B-page 300 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-39: ADC MODULE SPECIFICATIONS (10-BIT MODE) AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Min. Typ Max. Units Conditions Param No. Symbol ADC Accuracy (10-bit Mode) - Measurements with external VREF+/VREFAD20b Nr AD21b INL AD22b DNL AD23b GERR AD24b EOFF AD25b -- AD20b Nr AD21b INL AD22b DNL AD23b GERR AD24b EOFF AD25b -- AD30b THD AD31b SINAD AD32b SFDR AD33b FNYQ AD34b ENOB Note 1: Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Monotonicity(1) Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Monotonicity(1) Total Harmonic Distortion Signal to Noise and Distortion Spurious Free Dynamic Range Input Signal Bandwidth Effective Number of Bits -1 >-1 3 1.5 -- -- 57 72 -- 9.16 -1.5 >-1 0.4 0.2 -- 10 data bits -- -- 3 2 -- 10 data bits -- -- 7 3 -- -- 58.5 -- -- 9.4 +1 <1 15 7 -- -64 -- -- 550 -- +1.5 <1 6 5 -- bits LSb LSb LSb LSb -- bits LSb LSb LSb LSb -- dB dB dB kHz bits VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V Guaranteed -- -- -- -- -- VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V Guaranteed ADC Accuracy (10-bit Mode) - Measurements with internal VREF+/VREF- Dynamic Performance (10-bit Mode) The ADC conversion result never decreases with an increase in the input voltage, and has no missing codes. 2009 Microchip Technology Inc. Preliminary DS70593B-page 301 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-20: ADC CONVERSION (12-BIT MODE) TIMING CHARACTERISTICS (ASAM = 0, SSRC<2:0> = 000) AD50 ADCLK Instruction Execution SAMP ch0_dischrg ch0_samp eoc AD61 AD60 TSAMP CONV ADxIF Buffer(0) AD55 Set SAMP Clear SAMP 1 2 34 5 6 1 - Software sets ADxCON. SAMP to start sampling. 2 - Sampling starts after discharge period. TSAMP is described in Section 16. "Analog-to-Digital Converter (ADC) with DMA" (DS70183) in the "dsPIC33F/PIC24H Family Reference Manual". 3 - Software clears ADxCON. SAMP to start conversion. 4 - Sampling ends, conversion sequence starts. 7 5 - Convert bit 11. 6 - Convert bit 10. 7 - Convert bit 1. 8 - Convert bit 0. 8 9 9 - One TAD for end of conversion. DS70593B-page 302 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-40: ADC CONVERSION (12-BIT MODE) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Min. Typ(1) Max. Units Conditions Param No. Symbol AD50a TAD AD51a tRC AD55a tCONV AD56a FCNV AD57a tSAMP AD60a tPCS Clock Parameters ADC Clock Period 117.6 -- -- ADC Internal RC Oscillator -- 250 -- Period Conversion Rate Conversion Time -- 14 TAD Throughput Rate -- -- 500 Sample Time 3 TAD -- -- Timing Parameters Conversion Start from Sample 2.0 TAD -- 3.0 TAD Trigger(2) ns ns -- -- ns ksps -- -- -- -- -- Auto-Convert Trigger (SSRC<2:0> = 111) not selected -- Sample Start from Setting 2.0 TAD -- 3.0 TAD -- Sample (SAMP) bit(2) Conversion Completion to -- 0.5 TAD -- -- -- AD62a tCSS Sample Start (ASAM = 1)(2) Time to Stabilize Analog Stage -- -- 20 s -- AD63a tDPU from ADC Off to ADC On(2,3) Note 1: These parameters are characterized but not tested in manufacturing. 2: Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity performance, especially at elevated temperatures. 3: tDPU is the time required for the ADC module to stabilize when it is turned on (AD1CON1 AD61a tPSS 2009 Microchip Technology Inc. Preliminary DS70593B-page 303 dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-21: ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS (CHPS<1:0> = 01, SIMSAM = 0, ASAM = 0, SSRC<2:0> = 000) AD50 ADCLK Instruction Execution Set SAMP SAMP ch0_dischrg ch0_samp ch1_dischrg ch1_samp eoc AD61 AD60 TSAMP CONV ADxIF Buffer(0) Buffer(1) AD55 AD55 Clear SAMP 1 2 3 4 5 6 7 8 5 6 7 8 1 - Software sets ADxCON. SAMP to start sampling. 2 - Sampling starts after discharge period. TSAMP is described in Section 16. "Analog-to-Digital Converter (ADC)" (DS70183) in the "dsPIC33F/PIC24H Family Reference Manual". 3 - Software clears ADxCON. SAMP to start conversion. 4 - Sampling ends, conversion sequence starts. 5 - Convert bit 9. 6 - Convert bit 8. 7 - Convert bit 0. 8 - One TAD for end of conversion. DS70593B-page 304 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A FIGURE 25-22: ADC CONVERSION (10-BIT MODE) TIMING CHARACTERISTICS (CHPS<1:0> = 01, SIMSAM = 0, ASAM = 1, SSRC<2:0> = 111, SAMC<4:0> = 00001) AD50 ADCLK Instruction Execution SAMP ch0_dischrg ch0_samp ch1_dischrg ch1_samp eoc Set ADON TSAMP AD55 CONV ADxIF Buffer(0) Buffer(1) AD55 TSAMP TCONV 1 2 3 4 5 6 7 3 4 5 6 8 3 4 1 - Software sets ADxCON. ADON to start AD operation. 5 - Convert bit 0. 2 - Sampling starts after discharge period. 6 - One TAD for end of conversion. TSAMP is described in Section 16. "Analog-to-Digital Converter 7 (ADC)" (DS70183) in the "dsPIC33F/PIC24H Family Reference Manual".- Begin conversion of next channel. 3 - Convert bit 9. 4 - Convert bit 8. 8 - Sample for time specified by SAMC<4:0>. 2009 Microchip Technology Inc. Preliminary DS70593B-page 305 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 25-41: ADC CONVERSION (10-BIT MODE) TIMING REQUIREMENTS AC CHARACTERISTICS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +85C for Industrial -40C TA +125C for Extended Characteristic Min. Typ(1) Max. Units Conditions Param Symbol No. Clock Parameters AD50b TAD AD51b TRC AD55b TCONV AD56b FCNV AD57b TSAMP AD60b TPCS ADC Clock Period ADC Internal RC Oscillator Period Conversion Time Throughput Rate Sample Time Conversion Start from Sample Trigger(2) Sample Start from Setting Sample (SAMP) bit(2) Conversion Completion to Sample Start (ASAM = 1)(2) Time to Stabilize Analog Stage from ADC Off to ADC On(2,3) 65 -- -- -- 2 TAD 2.0 TAD -- 250 12 TAD -- -- -- -- -- -- 1.1 -- 3.0 TAD ns ns -- Msps -- -- -- -- -- -- -- Auto-Convert Trigger (SSRC<2:0> = 111) not selected -- -- -- Conversion Rate Timing Parameters AD61b TPSS AD62b TCSS AD63b TDPU Note 1: 2: 3: 2.0 TAD -- -- -- 0.5 TAD -- 3.0 TAD -- 20 -- -- s These parameters are characterized but not tested in manufacturing. Because the sample caps will eventually lose charge, clock rates below 10 kHz can affect linearity performance, especially at elevated temperatures. TDPU is the time required for the ADC module to stabilize when it is turned on (AD1CON1 DS70593B-page 306 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 26.0 HIGH TEMPERATURE ELECTRICAL CHARACTERISTICS This section provides an overview of dsPIC33FJXXXGPX06A/X08A/X10A electrical characteristics for devices operating in an ambient temperature range of -40C to +140C. Note: Programming of the Flash memory is not allowed above 125C. The specifications between -40C to +140C are identical to those shown in Section 25.0 "Electrical Characteristics" for operation between -40C to +125C, with the exception of the parameters listed in this section. Parameters in this section begin with an H, which denotes High temperature. For example, parameter DC10 in Section 25.0 "Electrical Characteristics" is the Industrial and Extended temperature equivalent of HDC10. Absolute maximum ratings for the dsPIC33FJXXXGPX06A/X08A/X10A high temperature devices are listed below. Exposure to these maximum rating conditions for extended periods can affect device reliability. Functional operation of the device at these or any other conditions above the parameters indicated in the operation listings of this specification is not implied. Absolute Maximum Ratings(1) Ambient temperature under bias(4) .........................................................................................................-40C to +140C Storage temperature .............................................................................................................................. -65C to +150C Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V Voltage on any pin that is not 5V tolerant with respect to VSS(5) .................................................... -0.3V to (VDD + 0.3V) Voltage on any 5V tolerant pin with respect to VSS when VDD < 3.0V(5) ....................................... -0.3V to (VDD + 0.3V) Voltage on any 5V tolerant pin with respect to VSS when VDD 3.0V(5) .................................................... -0.3V to 5.6V Voltage on VCAP/VDDCORE with respect to VSS ....................................................................................... 2.25V to 2.75V Maximum current out of VSS pin .............................................................................................................................60 mA Maximum current into VDD pin(2) .............................................................................................................................60 mA Maximum junction temperature............................................................................................................................. +145C Maximum output current sunk by any I/O pin(3) ........................................................................................................1 mA Maximum output current sourced by any I/O pin(3) ...................................................................................................1 mA Maximum current sunk by all ports combined ........................................................................................................10 mA Maximum current sourced by all ports combined(2) ................................................................................................10 mA Note 1: Stresses above those listed under "Absolute Maximum Ratings" can cause permanent damage to the device. This is a stress rating only, and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods can affect device reliability. 2: Maximum allowable current is a function of device maximum power dissipation (see Table 26-2). 3: Unlike devices at 125C and below, the specifications in this section also apply to the CLKOUT, VREF+, VREF-, SCLx, SDAx, PGCx, and PGDx pins. 4: AEC-Q100 reliability testing for devices intended to operate at 150C is 1,000 hours. Any design in which the total operating time from 125C to 150C will be greater than 1,000 hours is not warranted without prior written approval from Microchip Technology Inc. 5: Refer to the "Pin Diagrams" section for 5V tolerant pins. 2009 Microchip Technology Inc. Preliminary DS70593B-page 307 dsPIC33FJXXXGPX06A/X08A/X10A 26.1 High Temperature DC Characteristics OPERATING MIPS VS. VOLTAGE Max MIPS Characteristic VDD Range (in Volts) 3.0V to 3.6V Temperature Range (in C) -40C to +140C dsPIC33FJXXXGPX06A/X08A/ X10A 20 TABLE 26-1: TABLE 26-2: THERMAL OPERATING CONDITIONS Rating Symbol Min Typ Max Unit High Temperature Devices Operating Junction Temperature Range Operating Ambient Temperature Range Power Dissipation: Internal chip power dissipation: PINT = VDD x (IDD - IOH) I/O Pin Power Dissipation: I/O = ({VDD - VOH} x IOH) + (VOL x IOL) Maximum Allowed Power Dissipation PDMAX (TJ - TA)/JA W TJ TA -40 -40 -- -- +145 +140 C C PD PINT + PI/O W TABLE 26-3: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Characteristic Min Typ Max Units Conditions DC CHARACTERISTICS Parameter No. Symbol Operating Voltage HDC10 Supply Voltage VDD -- 3.0 3.3 3.6 V -40C to +140C TABLE 26-4: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Max Units Conditions DC CHARACTERISTICS Parameter No. Typical Power-Down Current (IPD) HDC60e HDC61c Note 1: 2: 3: 4: 250 3 2000 5 A A +140C +140C 3.3V 3.3V Base Power-Down Current(1,3) Watchdog Timer Current: IWDT(2,4) Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled to VSS. WDT, etc., are all switched off, and VREGS (RCON<8>) = 1. The current is the additional current consumed when the module is enabled. This current should be added to the base IPD current. These currents are measured on the device containing the most memory in this family. These parameters are characterized, but are not tested in manufacturing. DS70593B-page 308 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-5: DC CHARACTERISTICS: DOZE CURRENT (IDOZE) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Max 45 25 25 Doze Ratio 1:2 1:64 1:128 Units mA mA mA +140C 3.3V 20 MIPS Conditions DC CHARACTERISTICS Parameter No. HDC72a HDC72f HDC72g Note 1: Typical(1) 39 18 18 Parameters with Doze ratios of 1:2 and 1:64 are characterized, but are not tested in manufacturing. TABLE 26-6: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Characteristic Output Low Voltage I/O ports OSC2/CLKO -- -- 2.40 2.41 -- -- -- -- 0.4 0.4 -- -- V V V V IOL = 1 mA, VDD = 3.3V IOL = 1 mA, VDD = 3.3V IOH = -1 mA, VDD = 3.3V IOH = -1 mA, VDD = 3.3V Min Typ Max Units Conditions DC CHARACTERISTICS Param No. Symbol VOL HDO10 HDO16 VOH HDO20 HDO26 Output High Voltage I/O ports OSC2/CLKO TABLE 26-7: DC CHARACTERISTICS: PROGRAM MEMORY Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Min Typ Max Units Conditions DC CHARACTERISTICS Param Symbol No. Characteristic(1) Program Flash Memory HD130 EP HD134 TRETD Note 1: 2: Cell Endurance Characteristic Retention 10,000 20 -- -- -- -- E/W Year -40C to +140C(2) 1000 E/W cycles or less and no other specifications are violated These parameters are assured by design, but are not characterized or tested in manufacturing. Programming of the Flash memory is not allowed above 125C. 2009 Microchip Technology Inc. Preliminary DS70593B-page 309 dsPIC33FJXXXGPX06A/X08A/X10A 26.2 AC Characteristics and Timing Parameters The information contained in this section defines dsPIC33FJXXXGPX06A/X08A/X10A AC characteristics and timing parameters for high temperature devices. However, all AC timing specifications in this section are the same as those in Section 25.2 "AC Characteristics and Timing Parameters", with the exception of the parameters listed in this section. Parameters in this section begin with an H, which denotes High temperature. For example, parameter OS53 in Section 25.2 "AC Characteristics and Timing Parameters" is the Industrial and Extended temperature equivalent of HOS53. TABLE 26-8: TEMPERATURE AND VOLTAGE SPECIFICATIONS - AC Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Operating voltage VDD range as described in Table 26-1. AC CHARACTERISTICS FIGURE 26-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS Load Condition 2 - for OSC2 Load Condition 1 - for all pins except OSC2 VDD/2 RL Pin VSS CL Pin VSS CL RL = 464 CL = 50 pF for all pins except OSC2 15 pF for OSC2 output TABLE 26-9: PLL CLOCK TIMING SPECIFICATIONS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HOS53 Note 1: Symbol DCLK Characteristic CLKO Stability (Jitter)(1) Min -5 Typ 0.5 Max 5 Units % Conditions Measured over 100 ms period These parameters are characterized, but are not tested in manufacturing. DS70593B-page 310 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-10: SPIx MASTER MODE (CKE = 0) TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HSP35 HSP40 HSP41 Note 1: Symbol Characteristic(1) Min -- 28 35 Typ 10 -- -- Max 25 -- -- Units ns ns ns Conditions -- -- -- TscH2doV, SDOx Data Output Valid after TscL2doV SCKx Edge TdiV2scH, Setup Time of SDIx Data Input TdiV2scL to SCKx Edge TscH2diL, TscL2diL Hold Time of SDIx Data Input to SCKx Edge These parameters are characterized but not tested in manufacturing. TABLE 26-11: SPIx MODULE MASTER MODE (CKE = 1) TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HSP35 HSP36 HSP40 HSP41 Note 1: Symbol Characteristic(1) Min -- 35 28 35 Typ 10 -- -- -- Max 25 -- -- -- Units ns ns ns ns Conditions -- -- -- -- TscH2doV, SDOx Data Output Valid after TscL2doV SCKx Edge TdoV2sc, TdoV2scL SDOx Data Output Setup to First SCKx Edge TdiV2scH, Setup Time of SDIx Data Input TdiV2scL to SCKx Edge TscH2diL, TscL2diL Hold Time of SDIx Data Input to SCKx Edge These parameters are characterized but not tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 311 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-12: SPIx MODULE SLAVE MODE (CKE = 0) TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HSP35 HSP40 HSP41 HSP51 Note 1: 2: Symbol TscH2doV, TscL2doV TdiV2scH, TdiV2scL TscH2diL, TscL2diL TssH2doZ Characteristic(1) SDOx Data Output Valid after SCKx Edge Setup Time of SDIx Data Input to SCKx Edge Hold Time of SDIx Data Input to SCKx Edge SSx to SDOx Output High-Impedance Min -- 25 25 15 Typ -- -- -- -- Max 35 -- -- 55 Units ns ns ns ns Conditions -- -- -- See Note 2 These parameters are characterized but not tested in manufacturing. Assumes 50 pF load on all SPIx pins. TABLE 26-13: SPIx MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS AC CHARACTERISTICS Param No. HSP35 HSP40 HSP41 HSP51 HSP60 Note 1: 2: Symbol Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Characteristic(1) Min -- 25 25 15 -- Typ -- -- -- -- -- Max 35 -- -- 55 55 Units ns ns ns ns ns Conditions -- -- -- See Note 2 -- TscH2doV, SDOx Data Output Valid after TscL2doV SCKx Edge TdiV2scH, Setup Time of SDIx Data Input TdiV2scL to SCKx Edge TscH2diL, TscL2diL TssH2doZ TssL2doV Hold Time of SDIx Data Input to SCKx Edge SSx to SDOX Output High-Impedance SDOx Data Output Valid after SSx Edge These parameters are characterized but not tested in manufacturing. Assumes 50 pF load on all SPIx pins. DS70593B-page 312 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-14: ADC MODULE SPECIFICATIONS AC CHARACTERISTICS Param No. HAD08 Note 1: 2: Symbol Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) Operating temperature -40C TA +140C for High Temperature Characteristic Min Typ Max Units Conditions Reference Inputs IREF Current Drain -- -- 250 -- 600 50 A A ADC operating, See Note 1 ADC off, See Note 1 These parameters are not characterized or tested in manufacturing. These parameters are characterized, but are not tested in manufacturing. TABLE 26-15: ADC MODULE SPECIFICATIONS (12-BIT MODE) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HAD20a HAD21a HAD22a HAD23a HAD24a Symbol Characteristic Min Typ Max Units Conditions ADC Accuracy (12-bit Mode) - Measurements with External VREF+/VREF-(1) Nr INL DNL GERR EOFF Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error -2 > -1 -2 -3 12 data bits -- -- -- -- +2 <1 10 5 bits LSb LSb LSb LSb -- VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V -- VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V -- ADC Accuracy (12-bit Mode) - Measurements with Internal VREF+/VREF-(1) HAD20a HAD21a HAD22a HAD23a HAD24a HAD33a Note 1: 2: Nr INL DNL GERR EOFF FNYQ Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Input Signal Bandwidth -2 > -1 2 2 -- 12 data bits -- -- -- -- -- +2 <1 20 10 200 bits LSb LSb LSb LSb kHz Dynamic Performance (12-bit Mode)(2) These parameters are characterized, but are tested at 20 ksps only. These parameters are characterized by similarity, but are not tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 313 dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-16: ADC MODULE SPECIFICATIONS (10-BIT MODE) Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. HAD20b HAD21b HAD22b HAD23b HAD24b Symbol Characteristic Min Typ Max Units Conditions ADC Accuracy (10-bit Mode) - Measurements with External VREF+/VREF-(1) Nr INL DNL GERR EOFF Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error -3 > -1 -5 -1 10 data bits -- -- -- -- 3 <1 6 5 bits LSb LSb LSb LSb -- VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V VINL = AVSS = VREFL = 0V, AVDD = VREFH = 3.6V -- VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V VINL = AVSS = 0V, AVDD = 3.6V -- ADC Accuracy (10-bit Mode) - Measurements with Internal VREF+/VREF-(1) HAD20b HAD21b HAD22b HAD23b HAD24b HAD33b Note 1: 2: Nr INL DNL GERR EOFF FNYQ Resolution Integral Nonlinearity Differential Nonlinearity Gain Error Offset Error Input Signal Bandwidth -2 > -1 -5 -1.5 -- 10 data bits -- -- -- -- -- 2 <1 15 7 400 bits LSb LSb LSb LSb kHz Dynamic Performance (10-bit Mode)(2) These parameters are characterized, but are tested at 20 ksps only. These parameters are characterized by similarity, but are not tested in manufacturing. DS70593B-page 314 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A TABLE 26-17: ADC CONVERSION (12-BIT MODE) TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. Symbol Characteristic Min Typ Max Units Conditions Clock Parameters HAD50 HAD56 Note 1: TAD FCNV ADC Clock Period(1) Throughput Rate(1) 147 Conversion Rate -- -- 400 Ksps -- These parameters are characterized but not tested in manufacturing. -- -- ns -- TABLE 26-18: ADC CONVERSION (10-BIT MODE) TIMING REQUIREMENTS Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated) AC CHARACTERISTICS Operating temperature -40C TA +140C for High Temperature Param No. Symbol Characteristic Min Typ Max Units Conditions Clock Parameters HAD50 HAD56 Note 1: TAD FCNV ADC Clock Period(1) Throughput Rate(1) 104 -- -- -- -- 800 ns Ksps -- -- Conversion Rate These parameters are characterized but not tested in manufacturing. 2009 Microchip Technology Inc. Preliminary DS70593B-page 315 dsPIC33FJXXXGPX06A/X08A/X10A NOTES: DS70593B-page 316 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 27.0 27.1 PACKAGING INFORMATION Package Marking Information 64-Lead QFN (9x9x0.9mm) Example XXXXXXXXXX XXXXXXXXXX YYWWNNN 33FJ64GP 206A-I/MR e3 0610017 64-Lead TQFP (10x10x1 mm) Example XXXXXXXXXX XXXXXXXXXX XXXXXXXXXX YYWWNNN dsPIC33FJ 256GP706A -I/PT e3 0510017 80-Lead TQFP (12x12x1 mm) Example XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN dsPIC33FJ128 GP708A-I/PT e3 0510017 Legend: XX...X Y YY WW NNN e3 * Customer-specific information Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code Pb-free JEDEC designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. 2009 Microchip Technology Inc. Preliminary DS70593B-page 317 dsPIC33FJXXXGPX06A/X08A/X10A 27.1 Package Marking Information (Continued) 100-Lead TQFP (12x12x1 mm) Example XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN dsPIC33FJ256 GP710A-I/PT e3 0510017 100-Lead TQFP (14x14x1mm) Example XXXXXXXXXXXX XXXXXXXXXXXX YYWWNNN dsPIC33FJ256 GP710A-I/PF e3 0510017 Legend: XX...X Y YY WW NNN e3 * Customer-specific information Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code Pb-free JEDEC designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. DS70593B-page 318 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 27.2 Package Details Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging 2009 Microchip Technology Inc. Preliminary DS70593B-page 319 dsPIC33FJXXXGPX06A/X08A/X10A Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging DS70593B-page 320 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [TQFP] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging D D1 E e E1 N b NOTE 1 123 NOTE 2 A c A2 A1 L L1 Units Dimension Limits Number of Leads Lead Pitch Overall Height Molded Package Thickness Standoff Foot Length Footprint Foot Angle Overall Width Overall Length Molded Package Width Molded Package Length Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom N e A A2 A1 L L1 E D E1 D1 c b 0.09 0.17 11 11 0 - 0.95 0.05 0.45 MIN MILLIMETERS NOM 64 0.50 BSC - 1.00 - 0.60 1.00 REF 3.5 12.00 BSC 12.00 BSC 10.00 BSC 10.00 BSC - 0.22 12 12 0.20 0.27 13 13 7 1.20 1.05 0.15 0.75 MAX Notes: 1. Pin 1 visual index feature may vary, but must be located within the hatched area. 2. Chamfers at corners are optional; size may vary. 3. Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.25 mm per side. 4. Dimensioning and tolerancing per ASME Y14.5M. BSC: Basic Dimension. Theoretically exact value shown without tolerances. REF: Reference Dimension, usually without tolerance, for information purposes only. Microchip Technology Drawing C04-085B 2009 Microchip Technology Inc. Preliminary DS70593B-page 321 dsPIC33FJXXXGPX06A/X08A/X10A /HDG 3ODVWLF 7KLQ 4XDG )ODWSDFN 37 1RWH [ [ PP %RG\ PP >74)3@ )RU WKH PRVW FXUUHQW SDFNDJH GUDZLQJV SOHDVH VHH WKH 0LFURFKLS 3DFNDJLQJ 6SHFLILFDWLRQ ORFDWHG DW KWWS ZZZ PLFURFKLS FRP SDFNDJLQJ DS70593B-page 322 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 80-Lead Plastic Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm Footprint [TQFP] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging D D1 E e E1 b N 12 3 A c NOTE 1 NOTE 2 L A1 L1 A2 Units Dimension Limits Number of Leads Lead Pitch Overall Height Molded Package Thickness Standoff Foot Length Footprint Foot Angle Overall Width Overall Length Molded Package Width Molded Package Length Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom N e A A2 A1 L L1 E D E1 D1 c b 0.09 0.17 11 11 0 - 0.95 0.05 0.45 MIN MILLIMETERS NOM 80 0.50 BSC - 1.00 - 0.60 1.00 REF 3.5 14.00 BSC 14.00 BSC 12.00 BSC 12.00 BSC - 0.22 12 12 0.20 0.27 13 13 7 1.20 1.05 0.15 0.75 MAX Notes: 1. Pin 1 visual index feature may vary, but must be located within the hatched area. 2. Chamfers at corners are optional; size may vary. 3. Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.25 mm per side. 4. Dimensioning and tolerancing per ASME Y14.5M. BSC: Basic Dimension. Theoretically exact value shown without tolerances. REF: Reference Dimension, usually without tolerance, for information purposes only. Microchip Technology Drawing C04-092B 2009 Microchip Technology Inc. Preliminary DS70593B-page 323 dsPIC33FJXXXGPX06A/X08A/X10A /HDG 3ODVWLF 7KLQ 4XDG )ODWSDFN 37 1RWH [ [ PP %RG\ PP >74)3@ )RU WKH PRVW FXUUHQW SDFNDJH GUDZLQJV SOHDVH VHH WKH 0LFURFKLS 3DFNDJLQJ 6SHFLILFDWLRQ ORFDWHG DW KWWS ZZZ PLFURFKLS FRP SDFNDJLQJ DS70593B-page 324 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 100-Lead Plastic Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm Footprint [TQFP] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging D D1 e E E1 b N 1 23 NOTE 1 c NOTE 2 A L Units Dimension Limits Number of Leads Lead Pitch Overall Height Molded Package Thickness Standoff Foot Length Footprint Foot Angle Overall Width Overall Length Molded Package Width Molded Package Length Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom N e A A2 A1 L L1 E D E1 D1 c b 0.09 0.13 11 11 0 - 0.95 0.05 0.45 MIN A1 L1 MILLIMETERS NOM 100 0.40 BSC - 1.00 - 0.60 1.00 REF 3.5 14.00 BSC 14.00 BSC 12.00 BSC 12.00 BSC - 0.18 12 12 0.20 0.23 13 13 7 1.20 1.05 0.15 0.75 MAX A2 Notes: 1. Pin 1 visual index feature may vary, but must be located within the hatched area. 2. Chamfers at corners are optional; size may vary. 3. Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.25 mm per side. 4. Dimensioning and tolerancing per ASME Y14.5M. BSC: Basic Dimension. Theoretically exact value shown without tolerances. REF: Reference Dimension, usually without tolerance, for information purposes only. Microchip Technology Drawing C04-100B 2009 Microchip Technology Inc. Preliminary DS70593B-page 325 dsPIC33FJXXXGPX06A/X08A/X10A /HDG 3ODVWLF 7KLQ 4XDG )ODWSDFN 37 1RWH [ [ PP %RG\ PP >74)3@ )RU WKH PRVW FXUUHQW SDFNDJH GUDZLQJV SOHDVH VHH WKH 0LFURFKLS 3DFNDJLQJ 6SHFLILFDWLRQ ORFDWHG DW KWWS ZZZ PLFURFKLS FRP SDFNDJLQJ DS70593B-page 326 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A 100-Lead Plastic Thin Quad Flatpack (PF) - 14x14x1 mm Body, 2.00 mm Footprint [TQFP] Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging D D1 e E1 E b N NOTE 1 1 23 NOTE 2 A c L A1 L1 A2 Units Dimension Limits Number of Leads Lead Pitch Overall Height Molded Package Thickness Standoff Foot Length Footprint Foot Angle Overall Width Overall Length Molded Package Width Molded Package Length Lead Thickness Lead Width Mold Draft Angle Top Mold Draft Angle Bottom N e A A2 A1 L L1 E D E1 D1 c b 0.09 0.17 11 11 0 - 0.95 0.05 0.45 MIN MILLIMETERS NOM 100 0.50 BSC - 1.00 - 0.60 1.00 REF 3.5 16.00 BSC 16.00 BSC 14.00 BSC 14.00 BSC - 0.22 12 12 0.20 0.27 13 13 7 1.20 1.05 0.15 0.75 MAX Notes: 1. Pin 1 visual index feature may vary, but must be located within the hatched area. 2. Chamfers at corners are optional; size may vary. 3. Dimensions D1 and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.25 mm per side. 4. Dimensioning and tolerancing per ASME Y14.5M. BSC: Basic Dimension. Theoretically exact value shown without tolerances. REF: Reference Dimension, usually without tolerance, for information purposes only. Microchip Technology Drawing C04-110B 2009 Microchip Technology Inc. Preliminary DS70593B-page 327 dsPIC33FJXXXGPX06A/X08A/X10A /HDG 3ODVWLF 7KLQ 4XDG )ODWSDFN 3) 1RWH [ [ PP %RG\ PP >74)3@ )RU WKH PRVW FXUUHQW SDFNDJH GUDZLQJV SOHDVH VHH WKH 0LFURFKLS 3DFNDJLQJ 6SHFLILFDWLRQ ORFDWHG DW KWWS ZZZ PLFURFKLS FRP SDFNDJLQJ DS70593B-page 328 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A APPENDIX A: MIGRATING FROM dsPIC33FJXXXGPX06/ X08/X10 DEVICES TO dsPIC33FJXXXGPX06A /X08A/X10A DEVICES dsPIC33FJXXXGPX06A/X08A/X10A devices were designed to enhance the dsPIC33FJXXXGPX06/X08/ X10 families of devices. In general, the dsPIC33FJXXXGPX06A/X08A/X10A devices are backward-compatible with dsPIC33FJXXXGPX06/X08/X10 devices; however, manufacturing differences may cause dsPIC33FJXXXGPX06A/X08A/X10A devices to behave differently from dsPIC33FJXXXGPX06/X08/ X10 devices. Therefore, complete system test and characterization is recommended if dsPIC33FJXXXGPX06A/X08A/X10A devices are used to replace dsPIC33FJXXXGPX06/X08/X10 devices. The following enhancements were introduced: * Extended temperature support of up to +125C * Enhanced Flash module with higher endurance and retention * New PLL Lock Enable configuration bit * Added Timer5 trigger for ADC1 and Timer3 trigger for ADC2 2009 Microchip Technology Inc. Preliminary DS70593B-page 329 dsPIC33FJXXXGPX06A/X08A/X10A APPENDIX B: REVISION HISTORY Revision B (October 2009) The revision includes the following global update: * Added Note 2 to the shaded table that appears at the beginning of each chapter. This new note provides information regarding the availability of registers and their associated bits This revision also includes minor typographical and formatting changes throughout the data sheet text. All other major changes are referenced by their respective section in the following table. Revision A (April 2009) This is the initial release of this document. TABLE B-1: MAJOR SECTION UPDATES Section Name Update Description Added information on high temperature operation (see "Operating Range:"). Updated the last paragraph to clarify the number of cycles that occur prior to the start of instruction execution (see Section 10.2.2 "Idle Mode"). Changed the reference to digital-only pins to 5V tolerant pins in the second paragraph of Section 11.2 "Open-Drain Configuration". Updated the two baud rate range features to: 10 Mbps to 38 bps at 40 MIPS. Updated the ADCx block diagram (see Figure 21-1). Updated the second paragraph and removed the fourth paragraph in Section 22.1 "Configuration Bits". Updated the Device Configuration Register Map (see Table 22-1). Added the FPWRT<2:0> bit field for the FWDT register to the Configurative Bits Description table (see Table 22-1). "High-Performance, 16-Bit Digital Signal Controllers" Section 10.0 "Power-Saving Features" Section 11.0 "I/O Ports" Section 18.0 "Universal Asynchronous Receiver Transmitter (UART)" Section 21.0 "10-Bit/12-Bit Analog-to-Digital Converter (ADC)" Section 22.0 "Special Features" Section 25.0 "Electrical Characteristics" Updated the Absolute Maximum Ratings for high temperature and added Note 4. Updated Power-Down Current parameters DC60d, DC60a, DC60b, and DC60d (see Table 25-7). Added I2Cx Bus Data Timing Requirements (Master Mode) parameter IM51 (see Table 25-32). Updated the SPIx Module Slave Mode (CKE = 1) Timing Characteristics (see Figure 25-12). Updated the Internal LPRC Accuracy parameters (see Table 25-19). Updated the ADC Module Specifications (12-bit Mode) parameters AD23a and AD24a (see Table 25-38). Updated the ADC Module Specifications (10-bit Mode) parameters AD23b and AD24b (see Table 25-39). Section 26.0 "High Temperature Electrical Characteristics" "Product Identification System" Added new chapter with high temperature specifications. Added the "H" definition for high temperature. DS70593B-page 330 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A INDEX A A/D Converter ................................................................... 235 DMA .......................................................................... 235 Initialization ............................................................... 235 Key Features............................................................. 235 AC Characteristics .................................................... 276, 310 ADC Module.............................................................. 313 ADC Module (10-bit Mode) ....................................... 314 ADC Module (12-bit Mode) ....................................... 313 Internal RC Accuracy ................................................ 278 Load Conditions ................................................ 276, 310 ADC Module ADC11 Register Map .................................................. 57 ADC2 Register Map .................................................... 57 Alternate Interrupt Vector Table (AIVT) .............................. 91 Arithmetic Logic Unit (ALU)................................................. 35 Assembler MPASM Assembler................................................... 264 Configuring Analog Port Pins............................................ 166 CPU Control Register.......................................................... 32 CPU Clocking System ...................................................... 148 Options ..................................................................... 148 Selection................................................................... 148 Customer Change Notification Service............................. 335 Customer Notification Service .......................................... 335 Customer Support............................................................. 335 D Data Accumulators and Adder/Subtractor .......................... 37 Data Space Write Saturation ...................................... 39 Overflow and Saturation ............................................. 37 Round Logic ............................................................... 38 Write Back .................................................................. 38 Data Address Space........................................................... 43 Alignment.................................................................... 43 Memory Map for dsPIC33FJXXXGPX06A/X08A/X10A Devices with 16 KB RAM.................................... 45 Memory Map for dsPIC33FJXXXGPX06A/X08A/X10A Devices with 30 KB RAM.................................... 46 Memory Map for dsPIC33FJXXXGPX06A/X08A/X10A Devices with 8 KB RAM...................................... 44 Near Data Space ........................................................ 43 Software Stack ........................................................... 69 Width .......................................................................... 43 Data Converter Interface (DCI) Module ............................ 227 DC Characteristics............................................................ 268 Doze Current (IDOZE)................................................ 309 High Temperature..................................................... 308 I/O Pin Input Specifications ...................................... 273 I/O Pin Output........................................................... 309 I/O Pin Output Specifications.................................... 274 Idle Current (IIDLE) .................................................... 271 Operating Current (IDD) ............................................ 270 Operating MIPS vs. Voltage ..................................... 308 Power-Down Current (IPD)........................................ 272 Power-down Current (IPD) ........................................ 308 Program Memory.............................................. 275, 309 Temperature and Voltage......................................... 308 Temperature and Voltage Specifications.................. 269 Thermal Operating Conditions.................................. 308 DCI Buffer Control ........................................................... 227 Buffer Data Alignment .............................................. 227 Introduction............................................................... 227 Transmit/Receive Shift Register ............................... 227 DCI I/O Pins...................................................................... 227 COFS........................................................................ 227 CSCK........................................................................ 227 CSDI ......................................................................... 227 CSDO ....................................................................... 227 DCI Module Register Map .............................................................. 66 Demonstration/Development Boards, Evaluation Kits, and Starter Kits................................................................ 266 Development Support ....................................................... 263 DMA Module DMA Register Map ..................................................... 58 DMAC Registers ............................................................... 138 DMAxCNT ................................................................ 138 DMAxCON................................................................ 138 DMAxPAD ................................................................ 138 B Barrel Shifter ....................................................................... 39 Bit-Reversed Addressing .................................................... 72 Example ...................................................................... 73 Implementation ........................................................... 72 Sequence Table (16-Entry)......................................... 73 Block Diagrams 16-bit Timer1 Module ................................................ 167 A/D Module ............................................................... 236 Connections for On-Chip Voltage Regulator............. 252 DCI Module ............................................................... 228 Device Clock ..................................................... 147, 149 DSP Engine ................................................................ 36 dsPIC33F .................................................................... 22 dsPIC33F CPU Core................................................... 30 ECAN Module ........................................................... 202 Input Capture ............................................................ 175 Output Compare ....................................................... 177 PLL............................................................................ 149 Reset System.............................................................. 85 Shared Port Structure ............................................... 165 SPI ............................................................................ 181 Timer2 (16-bit) .......................................................... 171 Timer2/3 (32-bit) ....................................................... 170 UART ........................................................................ 195 Watchdog Timer (WDT) ............................................ 253 C C Compilers Hi-Tech C.................................................................. 264 MPLAB C .................................................................. 264 Clock Switching................................................................. 155 Enabling .................................................................... 155 Sequence.................................................................. 155 Code Examples Erasing a Program Memory Page............................... 83 Initiating a Programming Sequence............................ 84 Loading Write Buffers ................................................. 84 Port Write/Read ........................................................ 166 PWRSAV Instruction Syntax..................................... 157 Code Protection ........................................................ 247, 254 Configuration Bits.............................................................. 247 Description (Table).................................................... 248 Configuration Register Map .............................................. 247 2009 Microchip Technology Inc. Preliminary DS70593B-page 331 dsPIC33FJXXXGPX06A/X08A/X10A DMAxREQ ................................................................ 138 DMAxSTA ................................................................. 138 DMAxSTB ................................................................. 138 DSP Engine......................................................................... 35 Multiplier...................................................................... 37 Summary .................................................................. 255 Instruction-Based Power-Saving Modes........................... 157 Idle ............................................................................ 158 Sleep ........................................................................ 157 Internal RC Oscillator Use with WDT........................................................... 253 Internet Address ............................................................... 335 Interrupt Control and Status Registers ............................... 95 IECx ............................................................................ 95 IFSx ............................................................................ 95 INTCON1 .................................................................... 95 INTCON2 .................................................................... 95 IPCx ............................................................................ 95 Interrupt Setup Procedures............................................... 135 Initialization ............................................................... 135 Interrupt Disable ....................................................... 135 Interrupt Service Routine .......................................... 135 Trap Service Routine ................................................ 135 Interrupt Vector Table (IVT) ................................................ 91 Interrupts Coincident with Power Save Instructions ......... 158 E ECAN Module CiFMSKSEL2 register ............................................... 219 ECAN1 Register Map (C1CTRL1.WIN = 0 or 1) ......... 60 ECAN1 Register Map (C1CTRL1.WIN = 0) ................ 60 ECAN1 Register Map (C1CTRL1.WIN = 1) ................ 61 ECAN2 Register Map (C2CTRL1.WIN = 0 or 1) ......... 63 ECAN2 Register Map (C2CTRL1.WIN = 0) .......... 63, 64 Frame Types ............................................................. 201 Modes of Operation .................................................. 203 Overview ................................................................... 201 ECAN Registers Filter 15-8 Mask Selection Register (CiFMSKSEL2). 219 Electrical Characteristics................................................... 267 AC ..................................................................... 276, 310 Enhanced CAN Module..................................................... 201 Equations Device Operating Frequency .................................... 148 Errata .................................................................................. 19 J JTAG Boundary Scan Interface ........................................ 247 M Memory Organization ......................................................... 41 Microchip Internet Web Site.............................................. 335 Modes of Operation Disable...................................................................... 203 Initialization ............................................................... 203 Listen All Messages.................................................. 203 Listen Only................................................................ 203 Loopback .................................................................. 203 Normal Operation ..................................................... 203 Modulo Addressing ............................................................. 70 Applicability................................................................. 72 Operation Example ..................................................... 71 Start and End Address ............................................... 71 W Address Register Selection .................................... 71 MPLAB ASM30 Assembler, Linker, Librarian ................... 264 MPLAB ICD 3 In-Circuit Debugger System ...................... 265 MPLAB Integrated Development Environment Software.. 263 MPLAB PM3 Device Programmer .................................... 266 MPLAB REAL ICE In-Circuit Emulator System ................ 265 MPLINK Object Linker/MPLIB Object Librarian ................ 264 F Flash Program Memory....................................................... 79 Control Registers ........................................................ 80 Operations .................................................................. 80 Programming Algorithm .............................................. 83 RTSP Operation.......................................................... 80 Table Instructions........................................................ 79 Flexible Configuration ....................................................... 247 FSCM Delay for Crystal and PLL Clock Sources ................... 89 Device Resets ............................................................. 89 H High Temperature Electrical Characteristics..................... 307 I I/O Ports ............................................................................ 165 Parallel I/O (PIO)....................................................... 165 Write/Read Timing .................................................... 166 I2C Operating Modes ...................................................... 187 Registers ................................................................... 187 I2C Module I2C1 Register Map ...................................................... 55 I2C2 Register Map ...................................................... 55 In-Circuit Debugger ........................................................... 254 In-Circuit Emulation........................................................... 247 In-Circuit Serial Programming (ICSP) ....................... 247, 254 Input Capture Registers ................................................................... 176 Input Change Notification Module ..................................... 166 Instruction Addressing Modes............................................. 69 File Register Instructions ............................................ 69 Fundamental Modes Supported.................................. 70 MAC Instructions......................................................... 70 MCU Instructions ........................................................ 69 Move and Accumulator Instructions ............................ 70 Other Instructions........................................................ 70 Instruction Set Overview ................................................................... 258 N NVM Module Register Map .............................................................. 68 O Open-Drain Configuration................................................. 166 Output Compare ............................................................... 177 P Packaging ......................................................................... 317 Details....................................................................... 321 Marking ............................................................. 317, 318 Peripheral Module Disable (PMD) .................................... 158 PICkit 2 Development Programmer/Debugger and PICkit 2 Debug Express ......................................................... 266 PICkit 3 In-Circuit Debugger/Programmer and PICkit 3 Debug Express..................................................................... 265 Pinout I/O Descriptions (table)............................................ 23 PMD Module Register Map .............................................................. 68 DS70593B-page 332 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A POR and Long Oscillator Start-up Times............................ 89 PORTA Register Map............................................................... 66 PORTB Register Map............................................................... 66 PORTC Register Map............................................................... 67 PORTD Register Map............................................................... 67 PORTE Register Map............................................................... 67 PORTF Register Map............................................................... 67 PORTG Register Map............................................................... 68 Power-Saving Features .................................................... 157 Clock Frequency and Switching................................ 157 Program Address Space ..................................................... 41 Construction................................................................ 74 Data Access from Program Memory Using Program Space Visibility.................................................... 77 Data Access from Program Memory Using Table Instructions .................................................................... 76 Data Access from, Address Generation...................... 75 Memory Map ............................................................... 41 Table Read Instructions TBLRDH ............................................................. 76 TBLRDL .............................................................. 76 Visibility Operation ...................................................... 77 Program Memory Interrupt Vector ........................................................... 42 Organization................................................................ 42 Reset Vector ............................................................... 42 fier) ................................................................... 217 CiRXFUL1 (ECAN Receive Buffer Full 1)................. 221 CiRXFUL2 (ECAN Receive Buffer Full 2)................. 221 CiRXMnEID (ECAN Acceptance Filter Mask n Extended Identifier) .......................................................... 220 CiRXMnSID (ECAN Acceptance Filter Mask n Standard Identifier) .......................................................... 220 CiRXOVF1 (ECAN Receive Buffer Overflow 1)........ 222 CiRXOVF2 (ECAN Receive Buffer Overflow 2)........ 222 CiTRBnDLC (ECAN Buffer n Data Length Control).. 225 CiTRBnDm (ECAN Buffer n Data Field Byte m) ....... 225 CiTRBnEID (ECAN Buffer n Extended Identifier) ..... 224 CiTRBnSID (ECAN Buffer n Standard Identifier)...... 224 CiTRBnSTAT (ECAN Receive Buffer n Status)........ 226 CiTRmnCON (ECAN TX/RX Buffer m Control) ........ 223 CiVEC (ECAN Interrupt Code) ................................. 206 CLKDIV (Clock Divisor) ............................................ 152 CORCON (Core Control) ...................................... 34, 96 DCICON1 (DCI Control 1) ........................................ 229 DCICON2 (DCI Control 2) ........................................ 230 DCICON3 (DCI Control 3) ........................................ 231 DCISTAT (DCI Status) ............................................. 232 DMACS0 (DMA Controller Status 0) ........................ 143 DMACS1 (DMA Controller Status 1) ........................ 145 DMAxCNT (DMA Channel x Transfer Count) ........... 142 DMAxCON (DMA Channel x Control)....................... 139 DMAxPAD (DMA Channel x Peripheral Address) .... 142 DMAxREQ (DMA Channel x IRQ Select) ................. 140 DMAxSTA (DMA Channel x RAM Start Address A) . 141 DMAxSTB (DMA Channel x RAM Start Address B) . 141 DSADR (Most Recent DMA RAM Address) ............. 146 I2CxCON (I2Cx Control)........................................... 189 I2CxMSK (I2Cx Slave Mode Address Mask)............ 193 I2CxSTAT (I2Cx Status) ........................................... 191 ICxCON (Input Capture x Control)............................ 176 IEC0 (Interrupt Enable Control 0) ............................. 108 IEC1 (Interrupt Enable Control 1) ............................. 110 IEC2 (Interrupt Enable Control 2) ............................. 112 IEC3 (Interrupt Enable Control 3) ............................. 114 IEC4 (Interrupt Enable Control 4) ............................. 115 IFS0 (Interrupt Flag Status 0) ................................... 100 IFS1 (Interrupt Flag Status 1) ................................... 102 IFS2 (Interrupt Flag Status 2) ................................... 104 IFS3 (Interrupt Flag Status 3) ................................... 106 IFS4 (Interrupt Flag Status 4) ................................... 107 INTCON1 (Interrupt Control 1) ................................... 97 INTCON2 (Interrupt Control 2) ................................... 99 INTTREG Interrupt Control and Status Register ...... 134 IPC0 (Interrupt Priority Control 0) ............................. 116 IPC1 (Interrupt Priority Control 1) ............................. 117 IPC10 (Interrupt Priority Control 10) ......................... 126 IPC11 (Interrupt Priority Control 11) ......................... 127 IPC12 (Interrupt Priority Control 12) ......................... 128 IPC13 (Interrupt Priority Control 13) ......................... 129 IPC14 (Interrupt Priority Control 14) ......................... 130 IPC15 (Interrupt Priority Control 15) ......................... 131 IPC16 (Interrupt Priority Control 16) ......................... 132 IPC17 (Interrupt Priority Control 17) ......................... 133 IPC2 (Interrupt Priority Control 2) ............................. 118 IPC3 (Interrupt Priority Control 3) ............................. 119 IPC4 (Interrupt Priority Control 4) ............................. 120 IPC5 (Interrupt Priority Control 5) ............................. 121 IPC6 (Interrupt Priority Control 6) ............................. 122 IPC7 (Interrupt Priority Control 7) ............................. 123 IPC8 (Interrupt Priority Control 8) ............................. 124 R Reader Response ............................................................. 336 Registers ADxCHS0 (ADCx Input Channel 0 Select................. 244 ADxCHS123 (ADCx Input Channel 1, 2, 3 Select) ... 243 ADxCON1 (ADCx Control 1)..................................... 238 ADxCON2 (ADCx Control 2)..................................... 240 ADxCON3 (ADCx Control 3)..................................... 241 ADxCON4 (ADCx Control 4)..................................... 242 ADxCSSH (ADCx Input Scan Select High)............... 245 ADxCSSL (ADCx Input Scan Select Low) ................ 245 ADxPCFGH (ADCx Port Configuration High) ........... 246 ADxPCFGL (ADCx Port Configuration Low)............. 246 CiBUFPNT1 (ECAN Filter 0-3 Buffer Pointer)........... 214 CiBUFPNT2 (ECAN Filter 4-7 Buffer Pointer)........... 215 CiBUFPNT3 (ECAN Filter 8-11 Buffer Pointer)......... 215 CiBUFPNT4 (ECAN Filter 12-15 Buffer Pointer)....... 216 CiCFG1 (ECAN Baud Rate Configuration 1) ............ 212 CiCFG2 (ECAN Baud Rate Configuration 2) ............ 213 CiCTRL1 (ECAN Control 1) ...................................... 204 CiCTRL2 (ECAN Control 2) ...................................... 205 CiEC (ECAN Transmit/Receive Error Count)............ 211 CiFCTRL (ECAN FIFO Control)................................ 207 CiFEN1 (ECAN Acceptance Filter Enable) ............... 214 CiFIFO (ECAN FIFO Status)..................................... 208 CiFMSKSEL1 (ECAN Filter 7-0 Mask Selection)..... 218, 219 CiINTE (ECAN Interrupt Enable) .............................. 210 CiINTF (ECAN Interrupt Flag)................................... 209 CiRXFnEID (ECAN Acceptance Filter n Extended Identifier).................................................................... 217 CiRXFnSID (ECAN Acceptance Filter n Standard Identi- 2009 Microchip Technology Inc. Preliminary DS70593B-page 333 dsPIC33FJXXXGPX06A/X08A/X10A IPC9 (Interrupt Priority Control 9) ............................. 125 NVMCOM (Flash Memory Control) ....................... 81, 82 OCxCON (Output Compare x Control) ..................... 179 OSCCON (Oscillator Control) ................................... 150 OSCTUN (FRC Oscillator Tuning) ............................ 154 PLLFBD (PLL Feedback Divisor) .............................. 153 PMD1 (Peripheral Module Disable Control Register 1)... 159 PMD2 (Peripheral Module Disable Control Register 2)... 161 PMD3 (Peripheral Module Disable Control Register 3)... 163 RCON (Reset Control) ................................................ 86 RSCON (DCI Receive Slot Control).......................... 233 SPIxCON1 (SPIx Control 1) ...................................... 183 SPIxCON2 (SPIx Control 2) ...................................... 185 SPIxSTAT (SPIx Status and Control) ....................... 182 SR (CPU Status) ................................................... 32, 96 T1CON (Timer1 Control)........................................... 168 TSCON (DCI Transmit Slot Control) ......................... 233 TxCON (T2CON, T4CON, T6CON or T8CON Control) .. 172 TyCON (T3CON, T5CON, T7CON or T9CON Control) .. 173 UxMODE (UARTx Mode) .......................................... 196 UxSTA (UARTx Status and Control) ......................... 198 Reset Clock Source Selection ............................................... 88 Special Function Register Reset States ..................... 89 Times .......................................................................... 88 Reset Sequence.................................................................. 91 Resets ................................................................................. 85 I2Cx Bus Start/Stop Bits (Master Mode)................... 291 I2Cx Bus Start/Stop Bits (Slave Mode)..................... 293 Input Capture (CAPx) ............................................... 284 OC/PWM................................................................... 285 Output Compare (OCx)............................................. 284 Reset, Watchdog Timer, Oscillator Start-up Timer and Power-up Timer ................................................ 280 SPIx Master Mode (CKE = 0) ................................... 286 SPIx Master Mode (CKE = 1) ................................... 287 SPIx Slave Mode (CKE = 0) ..................................... 288 SPIx Slave Mode (CKE = 1) ..................................... 289 Timer1, 2, 3, 4, 5, 6, 7, 8, 9 External Clock .............. 282 Timing Requirements ADC Conversion (10-bit mode)................................. 315 ADC Conversion (12-bit Mode)................................. 315 CLKO and I/O ........................................................... 279 DCI AC-Link Mode............................................ 297, 299 DCI Multi-Channel, I2S Modes.......................... 296, 299 External Clock........................................................... 277 Input Capture ............................................................ 284 SPIx Master Mode (CKE = 0) ................................... 311 SPIx Module Master Mode (CKE = 1) ...................... 311 SPIx Module Slave Mode (CKE = 0) ........................ 312 SPIx Module Slave Mode (CKE = 1) ........................ 312 Timing Specifications 10-bit A/D Conversion Requirements ....................... 306 12-bit A/D Conversion Requirements ....................... 303 CAN I/O Requirements ............................................. 298 I2Cx Bus Data Requirements (Master Mode)........... 292 I2Cx Bus Data Requirements (Slave Mode)............. 294 Output Compare Requirements................................ 284 PLL Clock ......................................................... 278, 310 Reset, Watchdog Timer, Oscillator Start-up Timer, Power-up Timer and Brown-out Reset Requirements ... 281 Simple OC/PWM Mode Requirements ..................... 285 SPIx Master Mode (CKE = 0) Requirements............ 286 SPIx Master Mode (CKE = 1) Requirements............ 287 SPIx Slave Mode (CKE = 0) Requirements.............. 288 SPIx Slave Mode (CKE = 1) Requirements.............. 290 Timer1 External Clock Requirements ....................... 282 Timer2, Timer4, Timer6 and Timer8 External Clock Requirements........................................................ 283 Timer3, Timer5, Timer7 and Timer9 External Clock Requirements........................................................ 283 S Serial Peripheral Interface (SPI) ....................................... 181 Software Simulator (MPLAB SIM)..................................... 265 Software Stack Pointer, Frame Pointer CALLL Stack Frame.................................................... 69 Special Features of the CPU............................................. 247 SPI Module SPI1 Register Map ...................................................... 56 SPI2 Register Map ...................................................... 56 Symbols Used in Opcode Descriptions............................. 256 System Control Register Map............................................................... 68 T Temperature and Voltage Specifications AC ..................................................................... 276, 310 Timer1 ............................................................................... 167 Timer2/3, Timer4/5, Timer6/7 and Timer8/9 ..................... 169 Timing Characteristics CLKO and I/O ........................................................... 279 Timing Diagrams 10-bit A/D Conversion (CHPS<1:0> = 01, SIMSAM = 0, ASAM = 0, SSRC<2:0> = 000) ......................... 304 10-bit A/D Conversion (CHPS<1:0> = 01, SIMSAM = 0, ASAM = 1, SSRC<2:0> = 111, SAMC<4:0> = 00001)............................................................... 305 12-bit A/D Conversion (ASAM = 0, SSRC = 000) ..... 302 CAN I/O..................................................................... 298 DCI AC-Link Mode .................................................... 297 DCI Multi -Channel, I2S Modes ................................. 295 External Clock ........................................................... 277 I2Cx Bus Data (Master Mode) .................................. 291 I2Cx Bus Data (Slave Mode) .................................... 293 U UART Module UART1 Register Map.................................................. 56 UART2 Register Map.................................................. 56 V Voltage Regulator (On-Chip) ............................................ 252 W Watchdog Timer (WDT)............................................ 247, 253 Programming Considerations ................................... 253 WWW Address ................................................................. 335 WWW, On-Line Support ..................................................... 19 DS70593B-page 334 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A THE MICROCHIP WEB SITE Microchip provides online support via our WWW site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information: * Product Support - Data sheets and errata, application notes and sample programs, design resources, user's guides and hardware support documents, latest software releases and archived software * General Technical Support - Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing * Business of Microchip - Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: * * * * Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com CUSTOMER CHANGE NOTIFICATION SERVICE Microchip's customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. 2009 Microchip Technology Inc. Preliminary DS70593B-page 335 dsPIC33FJXXXGPX06A/X08A/X10A READER RESPONSE It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150. Please list the following information, and use this outline to provide us with your comments about this document. To: RE: Technical Publications Manager Reader Response Total Pages Sent ________ From: Name Company Address City / State / ZIP / Country Telephone: (_______) _________ - _________ Application (optional): Would you like a reply? Y N Literature Number: DS70593B FAX: (______) _________ - _________ Device: dsPIC33FJXXXGPX06A/X08A/ Questions: 1. What are the best features of this document? 2. How does this document meet your hardware and software development needs? 3. Do you find the organization of this document easy to follow? If not, why? 4. What additions to the document do you think would enhance the structure and subject? 5. What deletions from the document could be made without affecting the overall usefulness? 6. Is there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS70593B-page 336 Preliminary 2009 Microchip Technology Inc. dsPIC33FJXXXGPX06A/X08A/X10A PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. dsPIC 33 FJ 256 GP7 10 A T I / PT - XXX Microchip Trademark Architecture Flash Memory Family Program Memory Size (KB) Product Group Pin Count Revision Level Tape and Reel Flag (if applicable) Temperature Range Package Pattern Examples: a) dsPIC33FJ256GP710AI/PT: General-purpose dsPIC33, 64 KB program memory, 100-pin, Industrial temp., TQFP package. Architecture: 33 = 16-bit Digital Signal Controller Flash Memory Family: FJ = Flash program memory, 3.3V Product Group: GP2 GP3 GP5 GP7 = = = = General purpose family General purpose family General purpose family General purpose family Pin Count: 06 08 10 = = = 64-pin 80-pin 100-pin Temperature Range: I E H = = = -40C to+85C(Industrial) -40C to+125C(Extended) -40C to+140C(High) Package: PT PF MR = = = 10x10 or 12x12 mm TQFP (Thin Quad Flatpack) 14x14 mm TQFP (Thin Quad Flatpack) 9x9mm QFN (Plastic Quad Flatpack) Pattern Three-digit QTP, SQTP, Code or Special Requirements (blank otherwise) ES = Engineering Sample 2009 Microchip Technology Inc. Preliminary DS70593B-page 337 Worldwide Sales and Service AMERICAS Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 ASIA/PACIFIC Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4080 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 03/26/09 DS70593B-page 338 Preliminary 2009 Microchip Technology Inc. |
Price & Availability of DSPIC33FJXXXGPX08A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |